No Products in the Cart
This expansion I/O module adds an opto-coupler isolated input interface with a response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series. The module is equipped with 16 inputs and 1 common that supports current sink/source output. The module allows to switch from 12V internal circuit power supply and the external circuit power supply of 12-24V.
Opto-coupler isolated input
The module offers 16 opto-coupler isolated input channels with a response speed of 200μsec or less. Also, current sink outputs and current source outputs can be switched.
Internal circuit power supply and external power supply
The module allows to switch between the 12V internal circuit power supply and the external circuit power supply of 12-24V.
All input signals can be configured as interrupt events
You can use all input signals as interrupt events and disable or enable the interrupt in bit units and select the interrupt edge.
Equipped with a digital filter function to prevent false recognition of input signals due to noise and chattering
This module features a digital filter that can prevent input signal noise and chattering. The input digital filter can be applied to all input terminals individually, and configuration can be performed using the software.
Input counter function
Digital input and counter input can be switched per channel. The counter values are automatically saved upon turning off the power.
Adaptable to a wide temperature range between -20 and +60°C
The module can operate in a wide temperature range between -20 and + 60°C. It can be installed in various environments.
|Input type||Opto-coupler isolated input (supports current sink [negative logic] output *1/current source [positive logic] output *2)|
|Input ON current||1.0mA or more|
|Input OFF current||0.16mA or less|
|Interrupt||16 interrupt input signals are arranged into a single output of interrupt signal. An interrupt is generated at the falling edge (HIGH-to-LOW transition) and the rising edge (LOW-to-HIGH transition) or at both of the edges. (setting can be done by software)|
|Software filter (LPF)||1msec – 1000msec *3|
|Response time||Within 200μsec|
|Number of input signal channels||16 (shared common)|
|LED||DI00 – DI07 (Green), DI10 – DI17 (Green)|
|Connector||MIL connector 20-pin (2.54mm pitch 10 x 2 lines)|
|Applicable wire||Flat cable with MIL connector|
|External circuit power supply||12 - 24VDC (±10%)|
|Internal circuit power supply||12VDC, 62 mA can be output from the total of all inputs as an external output current|
|Electricity consumption||5V 0.15A (Max.), 3.3V 0.10A (Max.)|
|Allowable distance of signal extension||Approx. 50m (depending on wiring environment)|
|Physical dimensions (mm)||15.6 (W) x 52.6(D) x 84(H) (not include projection)|
|Notes:||*1 Data “0” and “1” correspond to the High and Low levels, respectively.
*2 Data “0” and “1” correspond to the Low and High levels, respectively.
*3 To meet the specified CE EMC Directive, set the digital filter one meter or longer.
Installation Environment Requirements
|Operating ambient temperature *1||-20 - +60°C (Vertical installation)
-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a horizontal installation
|Operating ambient humidity||10 - 90%RH (No condensation)|
|Non-operating ambient temperature||-20 - +60°C|
|Operating ambient humidity||10 - 90%RH (No condensation)|
|Floating dust particles||Not extreme|
|Line noise||Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)|
|Static electricity resistance||Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)|
|Sweep resistance||10 - 57Hz *2 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)|
|Shock resistance||15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)|
|Standard||VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)|
|Notes:||*1 Derating by way of the output current is necessary. (Refer to "Derating" of reference manual
*2 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the user’s guide of the optional power supply).
Don’t see exactly what you’re looking for? Contec has you covered!
We offer a wide range of custom engineering and design services:
Other services include:
Contact us today to speak with a specialist.
Phone: +1 321 728 0172
Contec Americas Inc. currently offers easy online ordering for customers in the United States. Customers wishing to ship internationally can place an order by contacting us by phone +1 (321) 728-0172 or by email at eShop@us.contec.com to place an order.
|Availability*||Time to Ship|
|In Stock||Shipped within 1-3 business days.|
|Built to Order||
Shipped within approximately 2 to 6 weeks.
Processing time may vary based on component availability and market conditions. A Contec Americas representative will contact you via email or phone to confirm the lead time of your order within 2 business days after your order is placed. If you are not satisfied with the lead time provided, we will provide a full refund of your order.
*Product availability is visible on the product page above the product description and below the SKU. First, select the desired quantity and configuration options (if applicable). The product availability field will update based on your selections.
Please allow additional days in transit for delivery based on your shipment method. If there will be a significant delay in the shipment of your order, we will contact you via email or telephone.
Contec Americas Inc. ships to verifiable business addresses within the U.S., U.S. Territories. We do not ship to P.O. Boxes or APO/FPO addresses.
Shipping and delivery dates are not guaranteed. Orders can be delayed because of payment, billing, or shipping verification in order to prevent fraudulent credit card transactions. Tracking numbers will be sent to the customer when the order has shipped. Orders are not shipped or delivered on weekends or holidays. Shipping charges are non-refundable.
Contec Americas, Inc. is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim.
Customs, Duties and Taxes
Contec Americas Inc. is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Complete Contec Catalog
The Contec Americas eShop represents a limited selection of our extensive catalog of more than 800 products. We are pleased to offer both domestic and international customers technical consultations, quotes and volume pricing from our U.S. office. For qualified customers, we accept purchase orders and offer net terms. For more information, or to request a quote for a volume order, please contact us at eShop@us.contec.com or call us at +1 (321) 728-0172. Our complete catalog is available on our global website at www.contec.com.
For questions or comments regarding this policy, please contact us at eShop@us.contec.com.