2 - 3 weeks when in stock, 19-25 weeks if not on stock
The FXA3000 Series is an access point that conforms to IEEE 802.11n/a/b/g wireless networking standards and that supports a wide range of input power (5 to 30 VDC) and PoE. The light weight and compact design enables a versatile installation with included magnets and tapping screws. This product is installed with a connector protection cover and a security slot agaisnt theft.
Compatible with 4 standards, IEEE802.11n/a/b/g
You can choose 24 channels (W52/W53/W56/W58*1) with 5 GHz (IEEE802.11n/a), and with 2.4 GHz (IEEE802.11n/b/g), you can choose from 1 to 13 channels *2. So, it is possible to design a flexible wireless network to adjust a radio wave interference.
Sophisticated, light weight and compact design for installation
This board is compatible with PoE and it includes an antenna inside the chassis. As a result, this board can be installed in a variety of applications thanks to the magnets and tapping screws.
Supports power supply options
This board supports an AC adapter (sold separately), DC power supplies from 5 to 30 VDC, and power supplied from the LAN connector.
This product can be switched between access point (master station), station (slave station), and repeater operation modes
By switching the operation mode, you can use this board as not only as an access point (a master station) but also as a station (a slave station) and a repeater. You can use this product as a wireless LAN converter for a wired LAN device.
The proprietary encryption technology 'WSL' that is available along with WPA2/WPA and WEP
In addition to the certifications for advanced security standards WPA2/WPA and IEEE802.1X, this board is also equipped with our proprietary encryption technology 'WSL', which can be used at the same time as these certifications. MAC address filtering and ESSID hiding are also supported.