CPSN-COM-1PD CONPROSYS nano Series Serial I/O Module RS-422A/485
CPSN-COM-1PD CONPROSYS nano Series Serial I/O Module RS-422A/485
  • Availability: In Stock Many in stock Out of stock BUILT TO ORDER - SHIPS IN 2 - 6 WEEKS

CPSN-COM-1PD CONPROSYS nano Series Serial I/O Module RS-422A/485

Shipping calculated at checkout.

    This expansion I/O module adds a RS-422A/485 COM port complied to the CPU unit of the CONPROSYS nano series. One RS-422A/485 communication port channel is supplied. 

    RS-422A/485 serial communication and support maximum of 921,600bps 

    This module has one RS-422A/485 serial port channel. The baud rate can be set from 4 to 921,600bps. 

    Easy installation and removal 

    This module can be installed in and removed from the CPU unit without any tools. 

    Adaptable to a wide range of temperature between -20 and +60°C 

    The module is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments. 

    Equipped with a LED for operation checks

    The module has a LED for operation checks, which helps you visually confirm the communication status of each interface. 

    No electrolytic capacitor 

    Without an electrolytic capacitor, which has a limited life, we are creating a product with a long life cycle. 

    Function specifications

    Model Online Model
    Number of channels 1ch
    Transmission scheme Asynchronous Serial Transmission (Full Duplex/Half Duplex)
    Interface type RS-422A/485
    Isolation  Bus Isolation
    Voltage Resistance  500VAC
    Baud Rate The setting range differs by the software program.
    See the reference manual (Software) for details.*1*2 *3
    Data length
    Parity check Even, Odd, Non-parity *1
    Buffers It has 64-byte receive and 64-byte transmit FIFO buffers.
    Connector 2-piece 3.81mm pitch10-pin terminal
    Applicable wire AWG28 - 16
    Switch 6-pole switch(Full Duplex / Half Duplex), 4-pole switch(Terminator (ON/OFF))
    Surge protection element each signal - SG Interactive TVS Diode Stand off voltage : ±13V, Peak pulse power : 400W(1ms)
    Surge protection element SG -FG Gas discharge tube arrester
    Discharge voltage : ±300V, Impulse current tolerance : 2000A(8/20us, 10 times)
    LED  Transmission (Green), Reception (Green)
    Electricity consumption 5V 250mA (Max.)
    3.3V 20mA (Max.) 
    Physical dimensions (mm)  15.6(W)×52.6(D)×84(H) (Not include projection) 
    Weight  50g

    Installation Environment Requirements

    Item  CPSN-COM-1PD 
    Operating ambient temperature  -20 -+60°C (Wall installation)
    -20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation
    Operating ambient humidity  10 - 90%RH (No condensation)
    Non-operating ambient temperature -20 -+60°C
    Non-operating ambient humidity 10 - 90%RH (No condensation)
    Floating dust particles Not to be excessive
    Corrosive gases None
    Line noise Signal Line/±1kV (IEC61000-4-4 Level 3,EN61000-4-4 Level 3) 
    Static electricity resistance  Touch/±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
    Air/±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
    Sweep resistance  10 - 57Hz*4/ semi-amplitude Vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
    Shock resistance 15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2- 27-compliant, IEC60068-2-27-compliant) 
    Standard VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)
    Notes: With the optional DIN rail fitting power supply: 10-55Hz (for details, see the user’s guide of the optional power supply)

    Don’t see exactly what you’re looking for? Contec has you covered!

    We offer a wide range of custom engineering and design services:

    • Branding and Labeling
    • Software Image Deployment and BIOS Modification
    • Regulatory Testing and Certification
    • Modification of Existing Contec Hardware Platform
    • Fully Custom System Engineering Design and Development

    Other services include:

    • Life Cycle Management
    • Inventory Management
    • Fulfillment Logistics

    Contact us today to speak with a specialist.

    Online Form

    Email: eShop@us.contec.com

    Phone: +1 321 728 0172

    Contec Americas Inc. currently offers easy online ordering for customers in the United States. Customers wishing to ship internationally can place an order by contacting us by phone +1 (321) 728-0172 or by email at eShop@us.contec.com to place an order. 


    Availability*  Time to Ship
    In Stock Shipped within 1-3 business days.
    Built to Order

    Shipped within approximately 2 to 6 weeks.

    Processing time may vary based on component availability and market conditions. A Contec Americas representative will contact you via email or phone to confirm the lead time of your order within 2 business days after your order is placed.  If you are not satisfied with the lead time provided, we will provide a full refund of your order.


    *Product availability is visible on the product page above the product description and below the SKU. First, select the desired quantity and configuration options (if applicable). The product availability field will update based on your selections. 


    Image: Product Availability Field Location


    Please allow additional days in transit for delivery based on your shipment method. If there will be a significant delay in the shipment of your order, we will contact you via email or telephone.

    Contec Americas Inc. ships to verifiable business addresses within the U.S., U.S. Territories.  We do not ship to P.O. Boxes or APO/FPO addresses.

    Shipping and delivery dates are not guaranteed. Orders can be delayed because of payment, billing, or shipping verification in order to prevent fraudulent credit card transactions. Tracking numbers will be sent to the customer when the order has shipped. Orders are not shipped or delivered on weekends or holidays.  Shipping charges are non-refundable.

    Shipping Damage

    Contec Americas, Inc. is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.

    Please save all packaging materials and damaged goods before filing a claim.

    Customs, Duties and Taxes

    Contec Americas Inc. is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).

    Complete Contec Catalog

    The Contec Americas eShop represents a limited selection of our extensive catalog of more than 800 products. We are pleased to offer both domestic and international customers technical consultations, quotes and volume pricing from our U.S. office. For qualified customers, we accept purchase orders and offer net terms.  For more information, or to request a quote for a volume order, please contact us at eShop@us.contec.com or call us at +1 (321) 728-0172. Our complete catalog is available on our global website at www.contec.com.


    For questions or comments regarding this policy, please contact us at eShop@us.contec.com.