EDIT ADDITIONAL INFORMATION IN PRODUCTS

15" Resistive Touch Medical-Grade Display

For unique tab:

<table class="spec">
<tbody>
<tr>
<td style="width: 100px;"><strong>Model</strong></td>
<td style="width: 63px;">CM-ME150R</td>
<td style="width: 63px;">CM-ME170R</td>
<td style="width: 64px;">CM-ME190R</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Screen Size</strong></td>
<td style="width: 63px;">15”</td>
<td style="width: 63px;">17”</td>
<td style="width: 64px;">19”</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Resolution</strong></td>
<td style="width: 63px;">1024 x 768</td>
<td style="width: 63px;">1280 x 1024</td>
<td style="width: 64px;">1280 x 1024</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Touch Type</strong></td>
<td style="width: 63px;">5W Resistive Touch Monitor</td>
<td style="width: 63px;">5W Resistive Touch Monitor</td>
<td style="width: 64px;">5W Resistive Touch Monitor</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Brightness (nits)</strong></td>
<td style="width: 63px;">350</td>
<td style="width: 63px;">250</td>
<td style="width: 64px;">350</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Operating Temperature</strong></td>
<td style="width: 63px;">10~40° C</td>
<td style="width: 63px;">10~40° C</td>
<td style="width: 64px;">10~40° C</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Video Interface</strong></td>
<td style="width: 63px;">1x DVI<br>1x VGA D-Sub15</td>
<td style="width: 63px;">1x DVI<br>1x VGA D-Sub15</td>
<td style="width: 64px;">1x DVI<br>1x VGA D-Sub15</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Touch Interface</strong></td>
<td style="width: 63px;">RS-232/USB Combo</td>
<td style="width: 63px;">RS-232/USB Combo</td>
<td style="width: 64px;">RS-232/USB Combo</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Audio Interface</strong></td>
<td style="width: 63px;">3.5mm Audio Jack</td>
<td style="width: 63px;">3.5mm Audio Jack</td>
<td style="width: 64px;">3.5mm Audio Jack</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Color</strong></td>
<td style="width: 63px;">1.8 2.0 2.2 DICOM<br>LUT: 10 bits</td>
<td style="width: 63px;">1.8 2.0 2.2 DICOM<br>LUT: 10 bits</td>
<td style="width: 64px;">1.8 2.0 2.2 DICOM<br>LUT: 10 bits</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Audio</strong></td>
<td style="width: 63px;">2W Speaker</td>
<td style="width: 63px;">2W Speaker</td>
<td style="width: 64px;">2W Speaker</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Power Input</strong></td>
<td style="width: 63px;">DC 12V</td>
<td style="width: 63px;">DC 12V</td>
<td style="width: 64px;">DC 12V</td>
</tr>
<tr>
<td style="width: 100px;"><strong>Certifications</strong></td>
<td style="width: 63px;">IEC 60601-1<br>VCCI-B<br>FCC-B<br>CE</td>
<td style="width: 63px;">IEC 60601-1<br>VCCI-B<br>FCC-B<br>CE</td>
<td style="width: 64px;">IEC 60601-1<br>VCCI-B<br>FCC-B<br>CE</td>
</tr>
</tbody>
</table>

+ Add unique tab for product page

17" Resistive Touch Medical-Grade Display

For unique tab:

+ Add unique tab for product page

18.5" PCAP Touch Medical-Grade Display

For unique tab:

<table class="spec">
<tbody>
<tr>
<td><strong>Model</strong></td>
<td>CM-ME185P</td>
<td>CM-ME215P</td>
<td>CM-ME238P</td>
<td>CM-ME270P</td>
</tr>
<tr>
<td><strong>Screen Size</strong></td>
<td>18.5”</td>
<td>21.5”</td>
<td>23.8”</td>
<td>27”</td>
</tr>
<tr>
<td><strong>Resolution</strong></td>
<td>1366 x 768</td>
<td>1920 x 1080</td>
<td>1920 x 1080</td>
<td>1920 x 1080</td>
</tr>
<tr>
<td><strong>Touch Type</strong></td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
</tr>
<tr>
<td><strong>Brightness (nits)</strong></td>
<td>450</td>
<td>350</td>
<td>250</td>
<td>300</td>
</tr>
<tr>
<td><strong>Operating Temperature</strong></td>
<td>10~40° C</td>
<td>10~40° C</td>
<td>10~40° C</td>
<td>10~40° C</td>
</tr>
<tr>
<td><strong>Video Interface</strong></td>
<td>1x DVI-D<br>1x DP 1.1<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
</tr>
<tr>
<td><strong>Touch Interface</strong></td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
</tr>
<tr>
<td><strong>Audio Interface</strong></td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
</tr>
<tr>
<td><strong>Color</strong></td>
<td>1.8 2.0 2.2 DICOM<br>LUT: 10 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
</tr>
<tr>
<td><strong>Audio</strong></td>
<td>2W Speaker</td>
<td>2W Speaker</td>
<td>2W Speaker</td>
<td>2W Speaker</td>
</tr>
<tr>
<td><strong>Power Input</strong></td>
<td>DC 12V</td>
<td>DC 24V</td>
<td>DC 24V</td>
<td>DC 24V</td>
</tr>
<tr>
<td><strong>Certifications</strong></td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
</tr>
</tbody>
</table>

+ Add unique tab for product page

19" Resistive Touch Medical-Grade Display

For unique tab:

+ Add unique tab for product page

1U Dual Intel® Xeon® Gold 5120T Processor Server

For unique tab:

<div style="overflow-x:auto;">
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Attribute</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td>Formfactor</td>
<td>1U</td>
</tr>
<tr>
<td>Motherboard</td>
<td>Intel® Server Board S2600WFTR</td>
</tr>
<tr>
<td>CPU</td>
<td>2x Intel® Xeon® Gold 5120T Processor (19.25M Cache, 2.20 GHz)
</td>
</tr>
<tr>
<td>DRAM</td>
<td>LRDIMM, DDR4, 2 Rank, 2666MHz</td>
</tr>
<tr>
<td>System Memory</td>
<td>64GB support up to 7.5TB</td>
</tr>
<tr>
<td>Chipset</td>
<td>Intel® C624 Chipset</td>
</tr>
<tr>
<td>Ethernet</td>
<td>3x 1GbE (mgmt port) + Dual Port RJ45 10GbE</td>
</tr>
<tr>
<td>Sound</td>
<td>N/A</td>
</tr>
<tr>
<td>Graphics</td>
<td>Integrated</td>
</tr>
<tr>
<td>Expansion Sockets</td>
<td>2x PCIe x16 Gen 3</td>
</tr>
<tr>
<td>Storage</td>
<td>8x Intel SSD DC P4610 Series NVMe 1.6 TB</td>
</tr>
<tr>
<td>Interface</td>
<td>NVMe</td>
</tr>
<tr>
<td>RAID</td>
<td>0/1/10 (5 optional)</td>
</tr>
<tr>
<td>USB</td>
<td>5x USB 3.0</td>
</tr>
<tr>
<td>Serial Ports</td>
<td>2x RS-232</td>
</tr>
<tr>
<td>Embedded BIOS</td>
<td>Yes</td>
</tr>
<tr>
<td>Power Supply </td>
<td>1100W</td>
</tr>
<tr>
<td>TPM</td>
<td>2.0</td>
</tr>
<tr>
<td>Operating System</td>
<td>Options:  Windows Server 2019*, Windows Server 2016*, Red Hat Enterprise Linux 7.6*,<br> Red Hat Enterprise Linux 7.5*, SUSE Linux Enterprise <br>Server 15*, SUSE Linux Enterprise Server 12 SP4*, Ubuntu*</td>
</tr>
<tr>
<td>Temperature</td>
<td>0°C to 55°C</td>
</tr>
<tr>
<td>Extended Temperature</td>
<td>N/A</td>
</tr>
<tr>
<td>Humidity</td>
<td>50% - 90% non-condensing</td>
</tr>
<tr>
<td>Dimensions (WxDxH)</td>
<td>16.93" x 27.95" x 1.72"</td>
</tr>
<tr>
<td>Regulatory Certifications</td>
<td>CE, UL, FCC</td>
</tr>
<tr>
<td>Life Cycle</td>
<td>2023</td>
</tr>
</tbody></table>
</div>

+ Add unique tab for product page

21.5" PCAP Touch Medical-Grade Display

For unique tab:

+ Add unique tab for product page

23.8" PCAP Touch Medical-Grade Display

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<tbody>
<tr>
<td><strong>Model</strong></td>
<td>CM-ME185P</td>
<td>CM-ME215P</td>
<td>CM-ME238P</td>
<td>CM-ME270P</td>
</tr>
<tr>
<td><strong>Screen Size</strong></td>
<td>18.5”</td>
<td>21.5”</td>
<td>23.8”</td>
<td>27”</td>
</tr>
<tr>
<td><strong>Resolution</strong></td>
<td>1366 x 768</td>
<td>1920 x 1080</td>
<td>1920 x 1080</td>
<td>1920 x 1080</td>
</tr>
<tr>
<td><strong>Touch Type</strong></td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
<td>PCAP Touch Monitor</td>
</tr>
<tr>
<td><strong>Brightness (nits)</strong></td>
<td>450</td>
<td>350</td>
<td>250</td>
<td>300</td>
</tr>
<tr>
<td><strong>Operating Temperature</strong></td>
<td>10~40° C</td>
<td>10~40° C</td>
<td>10~40° C</td>
<td>10~40° C</td>
</tr>
<tr>
<td><strong>Video Interface</strong></td>
<td>1x DVI-D<br>1x DP 1.1<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
<td>1x DVI-D<br>1x DP 1.2<br>1x VGA D-Sub15</td>
</tr>
<tr>
<td><strong>Touch Interface</strong></td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
<td>RS-232/USB Combo</td>
</tr>
<tr>
<td><strong>Audio Interface</strong></td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
<td>3.5mm Audio Jack</td>
</tr>
<tr>
<td><strong>Color</strong></td>
<td>1.8 2.0 2.2 DICOM<br>LUT: 10 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
<td>Neutral 2.2 DICOM<br>LUT: 12 bits</td>
</tr>
<tr>
<td><strong>Audio</strong></td>
<td>2W Speaker</td>
<td>2W Speaker</td>
<td>2W Speaker</td>
<td>2W Speaker</td>
</tr>
<tr>
<td><strong>Power Input</strong></td>
<td>DC 12V</td>
<td>DC 24V</td>
<td>DC 24V</td>
<td>DC 24V</td>
</tr>
<tr>
<td><strong>Certifications</strong></td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
<td>IEC 60601-1<br>FCC-B<br>CE</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

27" PCAP Touch Medical-Grade Display

For unique tab:

+ Add unique tab for product page

2U Dual Intel® Xeon® Gold 5120T Processor Server

For unique tab:

<div style="overflow-x:auto;">
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Attribute</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td>Formfactor</td>
<td>2U</td>
</tr>
<tr>
<td>Motherboard</td>
<td>Intel® Server Board S2600WFTR</td>
</tr>
<tr>
<td>CPU</td>
<td>2x Intel® Xeon® Gold 5120T Processor (19.25M Cache, 2.20 GHz)
</td>
</tr>
<tr>
<td>DRAM</td>
<td>LRDIMM, DDR4, 2 Rank, 2666MHz</td>
</tr>
<tr>
<td>System Memory</td>
<td>16GB - support up to 7.5TB</td>
</tr>
<tr>
<td>Chipset</td>
<td>Intel® C624 Chipset</td>
</tr>
<tr>
<td>Ethernet</td>
<td>3x 1GbE (mgmt port) + Dual Port RJ45 10GbE</td>
</tr>
<tr>
<td>Sound</td>
<td>N/A</td>
</tr>
<tr>
<td>Graphics</td>
<td>Integrated</td>
</tr>
<tr>
<td>Expansion Sockets</td>
<td>2x PCIe x16 Gen 3<br> 1x PCIe x4 Gen 3 <br>3x PCIe x8 Gen 3</td>
</tr>
<tr>
<td>Storage</td>
<td>2x Intel SSD DC P4610 Series NVMe 1.6 TB</td>
</tr>
<tr>
<td>Interface</td>
<td>NVMe</td>
</tr>
<tr>
<td>RAID</td>
<td>0/1/10 (5 optional)</td>
</tr>
<tr>
<td>USB</td>
<td>5x USB 3.0</td>
</tr>
<tr>
<td>Serial Ports</td>
<td>2x RS-232</td>
</tr>
<tr>
<td>Embedded BIOS</td>
<td>Yes</td>
</tr>
<tr>
<td>Power Supply </td>
<td>1300W</td>
</tr>
<tr>
<td>TPM</td>
<td>2.0</td>
</tr>
<tr>
<td>Operating System</td>
<td>Options: Windows Server 2019, Windows Server 2016, Red Hat Enterprise Linux 7.6,<br> Red Hat Enterprise Linux 7.5, SUSE Linux Enterprise Server 15, SUSE Linux Enterprise <br>Server 12 SP4, Ubuntu</td>
</tr>
<tr>
<td>Temperature</td>
<td>0°C to 35°C</td>
</tr>
<tr>
<td>Extended Temperature</td>
<td>N/A</td>
</tr>
<tr>
<td>Humidity</td>
<td>50% - 90% non-condensing</td>
</tr>
<tr>
<td>Dimensions (WxDxH)</td>
<td>16.93" x 27.95" x 3.44"</td>
</tr>
<tr>
<td>Regulatory Certifications</td>
<td>CE, UL, FCC</td>
</tr>
<tr>
<td>Life Cycle</td>
<td>2023</td>
</tr>
</tbody></table>
</div>

+ Add unique tab for product page

2U Dual Intel® Xeon® Bronze 3106 Processor Server

For unique tab:

<div style="overflow-x:auto;">
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Attribute</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td>Formfactor</td>
<td>2U</td>
</tr>
<tr>
<td>Motherboard</td>
<td>Intel® Server Board S2600WFTR</td>
</tr>
<tr>
<td>CPU</td>
<td>2x  Intel® Xeon® Bronze 3106 Processor (19.25M Cache, 2.20 GHz)
</td>
</tr>
<tr>
<td>DRAM</td>
<td>LRDIMM, DDR4, 2 Rank, 2666MHz</td>
</tr>
<tr>
<td>System Memory</td>
<td>16GB - support up to 7.5TB</td>
</tr>
<tr>
<td>Chipset</td>
<td>Intel® C624 Chipset</td>
</tr>
<tr>
<td>Ethernet</td>
<td>3x 1GbE (mgmt port) + Dual Port RJ45 10GbE</td>
</tr>
<tr>
<td>Sound</td>
<td>N/A</td>
</tr>
<tr>
<td>Graphics</td>
<td>Integrated</td>
</tr>
<tr>
<td>Expansion Sockets</td>
<td>2x PCIe x16 Gen 3<br> 1x PCIe x4 Gen 3 <br>3x PCIe x8 Gen 3</td>
</tr>
<tr>
<td>Storage</td>
<td>8x Intel SSD DC P4610 Series NVMe 1.6 TB</td>
</tr>
<tr>
<td>Interface</td>
<td>NVMe</td>
</tr>
<tr>
<td>RAID</td>
<td>0/1/10 (5 optional)</td>
</tr>
<tr>
<td>USB</td>
<td>5x USB 3.0</td>
</tr>
<tr>
<td>Serial Ports</td>
<td>2x RS-232</td>
</tr>
<tr>
<td>Embedded BIOS</td>
<td>Yes</td>
</tr>
<tr>
<td>Power Supply </td>
<td>1300W redundant</td>
</tr>
<tr>
<td>TPM</td>
<td>2.0</td>
</tr>
<tr>
<td>Operating System</td>
<td>Options: Windows Server 2019, Windows Server 2016, Red Hat Enterprise Linux 7.6,<br> Red Hat Enterprise Linux 7.5, SUSE Linux Enterprise Server 15, SUSE Linux Enterprise <br>Server 12 SP4, Ubuntu</td>
</tr>
<tr>
<td>Temperature</td>
<td>0°C to 35°C</td>
</tr>
<tr>
<td>Extended Temperature</td>
<td>N/A</td>
</tr>
<tr>
<td>Humidity</td>
<td>50% - 90% non-condensing</td>
</tr>
<tr>
<td>Dimensions (WxDxH)</td>
<td>16.93" x 27.95" x 3.44"</td>
</tr>
<tr>
<td>Regulatory Certifications</td>
<td>CE, UL, FCC</td>
</tr>
<tr>
<td>Life Cycle</td>
<td>2023</td>
</tr>
</tbody></table>
</div>

+ Add unique tab for product page

AI-1004LY-WQ-US4ch Analog Input Terminal for Sub-1GHz band Wireless

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Hardware specification </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="2" align="center"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td rowspan="4">Wireless</td>
<td>Modulation system</td>
<td>GFSK</td>
</tr>
<tr>
<td>Speed *1</td>
<td>10kbps (Low data rate) /<br>
110kbps (Middle data rate) /<br>
250kbps (High data rate) </td>
</tr>
<tr>
<td>Output</td>
<td>13dBm</td>
</tr>
<tr>
<td>Used frequency</td>
<td>902 - 928MHz</td>
</tr>
<tr>
<td rowspan="4">USB</td>
<td>Bus specification</td>
<td>USB Specification 2.0/1.1-compliant</td>
</tr>
<tr>
<td>Data transmission speed</td>
<td>12Mbps (Full speed), 480Mbps (High speed)</td>
</tr>
<tr>
<td>Function</td>
<td>USB device</td>
</tr>
<tr>
<td>Connector</td>
<td>mini-B USB connector </td>
</tr>
<td colspan="2" >Antenna</td>
<td>Non-directional dipole antenna (2.0±0.7dBi)</td>
</tr>
<tr>
<td rowspan="3">Power supply</td>
<td>Input voltage range</td>
<td>12 - 24VDC±5%</td>
</tr>
<tr>
<td>Current consumption</td>
<td>110mA (at 12VDC input) (Max.), <br>
60mA (at 24VDC input) (Max.)</td>
</tr>
<tr>
<td>Power connector *4</td>
<td>European type terminal 3.5 pitch 3-pin jack connector</td>
</tr>
<tr>
<td colspan="2" >Physical dimensions (mm)</td>
<td>62.0(W) x 64.0(D) x 24.0(H) (No projection included)</td>
</tr>
<tr>
<td colspan="2" >Weight</td>
<td>100g (Body),<br>
150g (With bundled antenna, power connector, Interface connector)</td>
</tr>
<tr>
<td colspan="2" >Notes:</td>
<td>*1 It is a theoretical maximum value on wireless communication and does not indicate the actual
data speed. <br>
*2 When using the signal source equipped with the high-speed operational amplifier.<br>
*3 This numerical displays the conversion speed for A/D converter. The minimum executable
sampling cycle depends on the operating condition of the terminal.<br>
*4 This product cannot be used with USB bus power. Make sure to use the external power that
supplies 12VDC or 24VDC voltage.</td>
</tr>
</tbody></table>

<p><strong>Environmental Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Operating ambient temperature</td>
<td>-20 -+60°C*5</td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
<td>AC Line/±2kV, Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br> Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
<td>Sweep resistance</td>
<td>10 - 57Hz /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G <br> 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-
6-compliant)</td>
</tr>
<tr>
<td>Shock resistance</td>
<td>147m/s2(15G)/11ms/half-sine shock (JIS C 60068-2-27 -compliant, IEC 60068-2- 27 -compliant)</td>
</tr>
<tr>
<td>Standard</td>
<td>FCC Class A, RoHS Directive</td>
</tr>
<tr>
<td>Notes: </td>
<td>*5 The ambient temperature is 0 - 40°C. The support voltage of AC cable is 125 VAC 7 A. <br>
	*6 When using an optional AC adapter POA201-10-2.</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

AI-1608AY-USB Analog Input USB I/O Unit / 8ch(16bit 100ks/s)

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Encoder Input Section  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="2" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>Specification</strong></td>
</tr>
<tr>
<td rowspan="15">Analog input</td>
<td>Isolated specification</td>
<td>Un-Isolated </td>
</tr>
<tr>
<td>Input type </td>
<td>Single-Ended Input </td>
</tr>
<tr>
<td>Number of input channels </td>
<td>8ch </td>
</tr>
<tr>
<td>Input range </td>
<td>Bipolar ±10V </td>
</tr>
<tr>
<td>Maximum input rating </td>
<td>±20V </td>
</tr>
<tr>
<td>Input impedance </td>
<td>1MΩ or more </td>
</tr>
<tr>
<td>Resolution  </td>
<td>16bit </td>
</tr>
<tr>
<td>Non-Linearity error *7 </td>
<td>±12LSB </td>
</tr>
<tr>
<td>Conversion speed </td>
<td>10μsec/ch(Max.) *1
 </td>
</tr>
<tr>
<td>Buffer memory </td>
<td>1K data *6 </td>
</tr>
<tr>
<td>Conversion start trigger </td>
<td>Software / external trigger </td>
</tr>
<tr>
<td>Conversion stop trigger </td>
<td>Number of sampling times / external trigger/software </td>
</tr>
<tr>
<td>External start signal  </td>
<td>LVTTL level (Selecting one of the rising / falling / signal edge input
to the DI00-pin by the software) </td>
</tr>
<tr>
<td>External stop signal  </td>
<td>LVTTL level (Selecting one of the rising / falling / signal edge input
to the DI01-pin by the software)
 </td>
</tr>
<tr>
<td>External clock signal </td>
<td>LVTTL level (Selecting the rising / falling to the DI02-pin by the
software) </td>
</tr>
<tr>
<td rowspan="2">Digital I/O</td>
<td>Number of input
channels</td>
<td>Un-Isolated input 4ch (LVTTL positive logic) *2*3</td>
</tr>
<tr>
<td>Number of output
channels </td>
<td>Un-Isolated output 4ch (LVTTL positive logic) </td>
</tr>
<tr>
<td rowspan="3">USB</td>
<td>Bus specification</td>
<td>USB Specification 2.0/1.1 standard</td>
</tr>
<tr>
<td>USB transfer rate </td>
<td>12Mbps (Full-speed), 480Mbps (High-speed) *4 </td>
</tr>
<tr>
<td>Power supply </td>
<td>Bus power </td>
</tr>
<tr>
<td rowspan="8">Common section</td>
<td>Connector</td>
<td>14 pin (screw-terminal) plug header</td>
</tr>
<tr>
<td>Number of terminals
used at the same time  </td>
<td>127 terminals (Max.) *5 </td>
</tr>
<tr>
<td>Power consumption
(Max.)  </td>
<td>5VDC 350mA </td>
</tr>
<tr>
<td>Operating condition  </td>
<td>0 - 50°C, 10 - 90%RH(No condensation) </td>
</tr>
<tr>
<td>Physical
dimensions(mm)  </td>
<td>64(W) x 62(D) x 24(H) (exclusive of protrusions) </td>
</tr>
<tr>
<td>Weight  </td>
<td>90g (Not including the USB cable, attachment) </td>
</tr>
<tr>
<td>Attached cable  </td>
<td>USB cable 1.8m
 </td>
</tr>
<tr>
<td>Compatible wires  </td>
<td>AWG28 - 16 </td>
</tr>
<tr>
<td colspan="2">Certification  </td>
<td>RoHS,FCC,VCCI </td>
</tr>
<tr>
<td colspan="2">Notes:  </td>
<td>*1 Conversion speed for the A/D converter. The minimum executable sampling cycle
depends on the operating condition of the terminal.<br>
*2 You cannot use both the DI00 / DI01 / DI02-pin of digital input feature and the external
start / stop signal / external clock input simultaneously.<br>
*3 Each input accepts TTL (5VDC) level signals. <br>
*4 The USB transfer speed depends on the host PC environment used (OS and USB host
controller).<br>
*5 As a USB hub is also counted as one device, you cannot just connect 127 USB terminals.<br>
*6 1K Word (1024 data) of buffer memory are implemented.<br>
If (the number of channels) x (the number of camples)  1024 data, a sampling with a A/D
converter’s conversion rate of 10μSEC/ch is a available.
However, the actual amount of data that can be stored in the buffer memory will decrease:
one unit of data of the buffer memory is consumed per sampling as the internal status.
 </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

AI-1616L-LPE Analog Input Low Profile PCI Express Card /16ch AI(16bit 100ks/s) / 1ch Counter

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specification  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="2" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>AI-1616L-LPE</strong></td>
</tr>
<tr>
<td rowspan="15">Analog input</td>
<td>Isolated specification</td>
<td>Non-isolated </td>
</tr>
<tr>
<td>Input type </td>
<td>Single-Ended Input </td>
</tr>
<tr>
<td>Number of input channels </td>
<td>16ch </td>
</tr>
<tr>
<td>Input range </td>
<td>Bipolar ±10V </td>
</tr>
<tr>
<td>Absolute max. input voltage </td>
<td>±20V </td>
</tr>
<tr>
<td>Input impedance </td>
<td>1MΩ or more </td>
</tr>
<tr>
<td>Resolution  </td>
<td>16bit </td>
</tr>
<tr>
<td>Non-Linearity error *1 *2 </td>
<td>±5LSB </td>
</tr>
<tr>
<td>Conversion speed </td>
<td>10µsec/ch*3 [100KSPS]*4
 </td>
</tr>
<tr>
<td>Buffer memory </td>
<td>1k Word </td>
</tr>
<tr>
<td>Conversion start trigger </td>
<td>Software / external trigger </td>
</tr>
<tr>
<td>Conversion stop trigger </td>
<td>Number of sampling times / external trigger/software </td>
</tr>
<tr>
<td>External start signal  </td>
<td>LVTTL level (Rising or falling edge can be selected by software) Digital filter (1µ sec can be selected by software) </td>
</tr>
<tr>
<td>External stop signal  </td>
<td>LVTTL level (Rising or falling edge can be selected by software) Digital filter (1µ sec can be selected by software)
 </td>
</tr>
<tr>
<td>External clock signal </td>
<td>LVTTL level (Rising or falling edge can be selected by software) </td>
</tr>
<tr>
<td rowspan="2">Digital I/O</td>
<td>Number of input
channels</td>
<td>Non-isolated input 4ch (TTL level positive logic)</td>
</tr>
<tr>
<td>Number of output
channels </td>
<td>Non-isolated output 4ch (TTL level positive logic) </td>
</tr>
<tr>
<td rowspan="6">Counter</td>
<td>Number of channels</td>
<td>1ch</td>
</tr>
<tr>
<td>Counting system </td>
<td>Up count</td>
</tr>
<tr>
<td>Max. count </td>
<td>FFFFFFFFh (Binary data,32bit)</td>
</tr>
<tr>
<td>Number of external inputs </td>
<td>2 LVTTL level (Gate/Up)/ch Gate (High level), Up (Rising edge)</td>
</tr>
<tr>
<td>Number of external outputs </td>
<td>1 LVTTL level, Count match output (positive logic, pulse output)</td>
</tr>
<tr>
<td>Response frequency </td>
<td>10MHz (Max.)</td>
</tr>
<tr>
<td rowspan="8">Common section</td>
<td>I/O address</td>
<td>64 ports</td>
</tr>
<tr>
<td>Interruption level </td>
<td>Errors and various factors, One interrupt request line as
INTA </td>
</tr>
<tr>
<td>Used Connector </td>
<td>10250-52A2JL[3M] or equivalent to it</td>
</tr>
<tr>
<td>Power consumption </td>
<td>3.3VDC 400mA,12VDC 120mA </td>
</tr>
<tr>
<td>Operating condition  </td>
<td>0 - 50°C, 10 - 90%RH (No condensation) </td>
</tr>
<tr>
<td>Bus specification </td>
<td>PCI Express Base Specification Rev. 1.0a x1</td>
</tr>
<tr>
<td>External dimension (mm)  </td>
<td>121.69 (L) x 67.90 (H) </td>
</tr>
<tr>
<td>Weight  </td>
<td>60g </td>
</tr>
<tr>
<td colspan="2">Certification  </td>
<td>RoHS,CE,VCCI </td>
</tr>
<tr>
<td colspan="2">Notes:  </td>
<td>*1: The non-linearity error means an error of approximately 0.1% occurs over the maximum
range at 0°C and 50°C ambient temperature.<br>
*2: At the time of the source use of a signal which built in the high-speed operational
amplifier.<br>
*3: The required time is indicated in the analog to digital translation of one channel. When
AD of two or more channels is converted, time of the a few minutes of the channel is
necessary.<br>
Conversion time = Number of conversion channelsx10µsec<br>
*4: SPS = Samplings Per Second. The number of data that can be converted in one
second is shown. 
 </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

AO-1604LI-PE Analog Output PCI Express Card

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<p><strong>Analog output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Isolated specification</td>
<td>Bus-Isolated</td>
</tr>
<tr>
<td>Number of output channels</td>
<td>4ch</td>
</tr>
<tr>
<td>Output range</td>
<td>Bipolar ±10V</td>
</tr>
<tr>
<td>Absolute max. output currency</td>
<td>±5mA</td>
</tr>
<tr>
<td>Output impedance</td>
<td>1Ω or less</td>
</tr>
<tr>
<td>Resolution</td>
<td>16bit</td>
</tr>
<tr>
<td>Non-Linearity error *1</td>
<td>±5LSB</td>
</tr>
<tr>
<td>Conversion speed</td>
<td>10μsec [100KSPS]*2</td>
</tr>
<tr>
<td>Buffer memory</td>
<td>1k Word</td>
</tr>
<tr>
<td>Conversion start trigger</td>
<td>Software / external trigger</td>
</tr>
<tr>
<td>Conversion stop trigger</td>
<td>Number of sampling times / external trigger/software</td>
</tr>
<tr>
<td>External start signal</td>
<td>Isolation TTL-level (Rising or falling edge can be selected by software), Digital filter (1μsec can be selected by software)</td>
</tr>
<tr>
<td>External stop signal</td>
<td>Isolation TTL-level (Rising or falling edge can be selected by software), Digital filter (1μsec can be selected by software)</td>
</tr>
<tr>
<td>External clock signal</td>
<td>Isolation TTL-level (Rising or falling edge can be selected by software)</td>
</tr>
</tbody></table>

<p><strong>Digital I/O</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of input channels</td>
<td>Isolated input 4ch (TTL-level positive logic)</td>
</tr>
<tr>
<td>Number of output channels</td>
<td>Isolated input 4ch (TTL-level positive logic)</td>
</tr>
</tbody></table>

<p><strong>Counter</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of channels</td>
<td>1ch</td>
</tr>
<tr>
<td>Counting system</td>
<td>Up count</td>
</tr>
<tr>
<td>Max. count</td>
<td>FFFFFFFFh (Binary data,32bit)</td>
</tr>
<tr>
<td>Number of external inputs</td>
<td>2 Isolation TTL-level (Gate/Up), Gate (positive logic/level), Up (Rising edge)</td>
</tr>
<tr>
<td>Number of external outputs</td>
<td>1 Isolation TTL-level, Count match output (positive logic, pulse output)</td>
</tr>
<tr>
<td>Response frequency</td>
<td>1MHz (Max.)</td>
</tr>
</tbody></table>

<p><strong>Common section</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>I/O address</td>
<td>64 ports</td>
</tr>
<tr>
<td>Interruption level</td>
<td>Errors and various factors, One interrupt request line as INTA</td>
</tr>
<tr>
<td>Connector</td>
<td>10250-52A2JL[3M]</td>
</tr>
<tr>
<td>Power consumption</td>
<td>3.3VDC 1500mA (Max.)</td>
</tr>
<tr>
<td>Operating condition</td>
<td>0 - 50°C, 10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Bus specification</td>
<td>PCI Express Base Specification Rev. 1.0a x1</td>
</tr>
<tr>
<td>Dimension (mm)</td>
<td>169.33 (L) x 110.18(H)</td>
</tr>
<tr>
<td>Weight</td>
<td>120 g</td>
</tr><tr>
<td>Notes</td>
<td>*1 The non-linearity error means an error of approximately 0.1% occurs over the maximum range at 0°C and 50°C ambient temperature.</br>
*2 SPS = Samplings Per Second. The number of data that can be converted in one second is shown.</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

BX-220 ThinManager-Ready Thin Client

For unique tab:

<span><strong>Base Configuration</strong></span></p>
<p> </p>
<table class="spec">
<tbody>
<tr>
<td>Processor</td>
<td>Intel Atom Processor E3845 (2M Cache, 1.91 GHz)</td>
</tr>
<tr>
<td>Display</td>
<td>1 DVI, 1 DP</td>
</tr>
<tr>
<td>Memory</td>
<td>4 GB ECC</td>
</tr>
<tr>
<td>Ethernet</td>
<td>2 GBE</td>
</tr>
<tr>
<td>Serial</td>
<td>2 RS-232, 1 RS-422/485</td>
</tr>
<tr>
<td>USB</td>
<td>2 USB 2.0, 1 USB 3.0</td>
</tr>
<tr>
<td>CFLASH</td>
<td>2 CF SOCKET</td>
</tr>
<tr>
<td>Dimensions</td>
<td>7.0" W x 4.5" D x 1.1" H</td>
</tr>
<tr>
<td>Weight</td>
<td>1.75 lbx. (800 grams)</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>0 - 50 C</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>N10 - 60 C</td>
</tr>
<tr>
<td>Humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Line Noise Resistance</td>
<td>AC line / ±2kV *5, Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static Electricity Resistance</td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) </td>
</tr>
<tr>
<td>Vibration Resistance</td>
<td>10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x, y, and z directions (JIS C60068-2-6 compliant, IEC 68-2-6 compliant)</td>
</tr>
<tr>
<td>Impact Resistance</td>
<td>100G, half-sine shock for 6 ms in x, y, and z directions (JIS C0041-compliant, IEC68-2-27-compliant) </td>
</tr>
<tr>
<td>Grounding</td>
<td>Class D grounding, SG-FG / continuity</td>
</tr>
<tr>
<td>Regulatory</td>
<td>FCC Class A, VCCI Class A, CE (EMC Directive Class A, RoHS Directive), UL/c-UL</td>
</tr>
<tr>
<td>Warranty</td>
<td>3-Year Limited Warranty on Parts and Workmanship</td>
</tr>
</tbody>
</table>
<p><strong><br></strong></p>
<p><span style="color: #000000;"><strong>Optional Additions</strong></span></p>
<p> </p>
<table class="spec">
<tbody>
<tr>
<td>Optional Storage Upgrades</td>
<td>16 GB CFast SSD
<p>32 GB CFast SSD</p>
</td>
</tr>
<tr>
<td>Optional Software</td>
<td>
<p>None</p>
ThinManager BIOS Licens
<p>Windows Embedded Standard 7 (WESP7P)</p>
<p>Windows 10 IoT Enterprise LTSB 2016</p>
</td>
</tr>
<tr>
<td>
<p>Optional Mounting/Bracket</p>
</td>
<td>None
<p>VESA Mounting Bracket</p>
<p>DIN Rail Mounting Bracket</p>
</td>
</tr>
</tbody>
</table>
<p><span style="color: #000000;"> </span></p>
<p><span style="color: #000000;"><strong>Physical Dimensions</strong></span></p>
<p><span style="color: #000000;"><img src="https://cdn2.hubspot.net/hubfs/3218969/bx220-physical-dimensions-1.png" alt="bx220-physical-dimensions-1" width="499" style="width: 499px;"></span></p>
<p><span style="color: #000000;"> </span></p>
<p><span style="color: #000000;"><strong>Component IO</strong></span></p>
<p><span style="color: #000000;"><strong>Front</strong></span></p>
<p><span style="color: #000000;"><strong><img src="https://cdn2.hubspot.net/hubfs/3218969/bx-220-io-front-1.jpg" alt="bx-220-io-front-1" width="500" style="width: 500px;"></strong></span></p>
<p><span style="color: #000000;"><strong>Rear</strong></span></p>
<p><span style="color: #000000;"><img src="https://cdn2.hubspot.net/hubfs/3218969/bx-220-io-rear-1.jpg" alt="bx-220-io-rear-1" width="500" style="width: 500px;"></span></p>

+ Add unique tab for product page

BX-220 Ultra-Small, Fanless Embedded Computer

For unique tab:

<span><strong>Base Configuration</strong></span></p>
<p> </p>
<table class="spec">
<tbody>
<tr>
<td>Processor</td>
<td>Intel Atom Processor E3845 (2M Cache, 1.91 GHz)</td>
</tr>
<tr>
<td>Display</td>
<td>1 DVI, 1 DP</td>
</tr>
<tr>
<td>Memory</td>
<td>4 GB ECC</td>
</tr>
<tr>
<td>Ethernet</td>
<td>2 GBE</td>
</tr>
<tr>
<td>Serial</td>
<td>2 RS-232, 1 RS-422/485</td>
</tr>
<tr>
<td>USB</td>
<td>2 USB 2.0, 1 USB 3.0</td>
</tr>
<tr>
<td>CFLASH</td>
<td>2 CF SOCKET</td>
</tr>
<tr>
<td>Dimensions</td>
<td>7.0" W x 4.5" D x 1.1" H</td>
</tr>
<tr>
<td>Weight</td>
<td>1.75 lbx. (800 grams)</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>0 - 50 C</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>N10 - 60 C</td>
</tr>
<tr>
<td>Humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Line Noise Resistance</td>
<td>AC line / ±2kV *5, Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static Electricity Resistance</td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) </td>
</tr>
<tr>
<td>Vibration Resistance</td>
<td>10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x, y, and z directions (JIS C60068-2-6 compliant, IEC 68-2-6 compliant)</td>
</tr>
<tr>
<td>Impact Resistance</td>
<td>100G, half-sine shock for 6 ms in x, y, and z directions (JIS C0041-compliant, IEC68-2-27-compliant) </td>
</tr>
<tr>
<td>Grounding</td>
<td>Class D grounding, SG-FG / continuity</td>
</tr>
<tr>
<td>Regulatory</td>
<td>FCC Class A, VCCI Class A, CE (EMC Directive Class A, RoHS Directive), UL/c-UL</td>
</tr>
<tr>
<td>Warranty</td>
<td>1-Year Limited Warranty on Parts and Workmanship</td>
</tr>
</tbody>
</table>
<p><strong><br></strong></p>
<p><span style="color: #000000;"><strong>Optional Additions</strong></span></p>
<p> </p>
<table class="spec">
<tbody>
<tr>
<td>Optional Storage Upgrades</td>
<td>16 GB CFast SSD
<p>32 GB CFast SSD</p>
</td>
</tr>
<tr>
<td>Optional Software</td>
<td>
<p>None</p>
ThinManager BIOS Licens
<p>Windows Embedded Standard 7 (WESP7P)</p>
<p>Windows 10 IoT Enterprise LTSB 2016</p>
</td>
</tr>
<tr>
<td>
<p>Optional Mounting/Bracket</p>
</td>
<td>None
<p>VESA Mounting Bracket</p>
<p>DIN Rail Mounting Bracket</p>
</td>
</tr>
</tbody>
</table>
<p><span style="color: #000000;"> </span></p>
<p><span style="color: #000000;"><strong>Physical Dimensions</strong></span></p>
<p><span style="color: #000000;"><img src="https://cdn2.hubspot.net/hubfs/3218969/bx220-physical-dimensions-1.png" alt="bx220-physical-dimensions-1" width="499" style="width: 499px;"></span></p>
<p><span style="color: #000000;"> </span></p>
<p><span style="color: #000000;"><strong>Component IO</strong></span></p>
<p><span style="color: #000000;"><strong>Front</strong></span></p>
<p><span style="color: #000000;"><strong><img src="https://cdn2.hubspot.net/hubfs/3218969/bx-220-io-front-1.jpg" alt="bx-220-io-front-1" width="500" style="width: 500px;"></strong></span></p>
<p><span style="color: #000000;"><strong>Rear</strong></span></p>
<p><span style="color: #000000;"><img src="https://cdn2.hubspot.net/hubfs/3218969/bx-220-io-rear-1.jpg" alt="bx-220-io-rear-1" width="500" style="width: 500px;"></span></p>

+ Add unique tab for product page

BX-320 Fanless Embedded PC

For unique tab:

<div style="overflow-x:auto;"><table class="spec"><table class="spec">
<tbody>
<tr>
<td width="10%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>Additional Configuration Options</strong><br /><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></td>
</tr>
<tr>
<td>Procesor</td>
<td>Intel® Atom™ Processor E3845 1.91GHz</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Display</td>
<td>Analog RGB×1 (15pin, HD-SUB connector)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Memory</td>
<td>4GB, 204pin SO-DIMM socket x 1</td>
<td style="border-left: 1px solid #cdd0d4;">PC3-10600(DDR3L 1333) ECC</td>
</tr>
<tr>
<td>Ethernet</td>
<td>2 port (RJ-45 connector)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Serial</td>
<td>RS-232C (general-purpose): 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)
Baud rate: 50 - 115,200bps</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>USB</td>
<td>USB3.0 compliant 1port (TYPE-A connector x1), USB2.0 compliant 3port (TYPE-A connector x3)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage</td>
<td>CFast Card (Q-MLC) 32GB</td>
<td style="border-left: 1px solid #cdd0d4;">CFast Card (SLC) 16GB</td>
</tr>
<tr>
<td>Dimensions</td>
<td>6.22 x 8.97 x 3.62 in</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Weigth</td>
<td>2.86 lbs</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>0 - 50°C</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-10 - 60°C</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Humidity</td>
<td>10 - 90% RH (No condensation)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
	<tr>
<td>Operating System</td>
<td>Windows 10 IoT Enterprise LTSB 2016 64bit</td>
<td style="border-left: 1px solid #cdd0d4;">Windows Embedded Standard 7 32bit</td>
</tr>
<tr>
<td>Line Noise Resistance</td>
<td>AC line / ±2kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)*6,
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Static Electricity Resistance</td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2
Level 2)
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3,
EN61000-4-2 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Vibration Resistance</td>
<td>10 - 57Hz/semi-amplitude 0.15 mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Impact Resistance</td>
<td>15G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Grounding</td>
<td>Class D grounding, SG-FG / continuity</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Regulatory</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>

</tbody>
	</table></div>

+ Add unique tab for product page

BX-830D - Fanless Embedded PC, Conforms to EN 50155, Train and Vehicle Mountable

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="2"><strong>Model</strong></td>
<td width="60%"><strong>BX-830D-DC7xxxxx</strong></td>
</tr>
<tr>
<td colspan="2">CPU </td>
<td>Intel® Atom™ Processor E3845 1.91GHz </td>
</tr>
<tr>
<td colspan="2">BIOS </td>
<td>BIOS (mfd. by AMI) </td>
</tr>
<tr>
<td colspan="2">Memory </td>
<td>4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC </td>
</tr>
<tr>
<td colspan="2">Graphic </td>
<td>Intel® HD Graphics (built-in CPU) </td>
</tr>
<tr>
<td rowspan="3">System resolution </td>
<td>Analog RGB </td>
<td>640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768, 1,280x800,
1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900, 1,600x900,
1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors) </td>
</tr>
<tr>
<td>DVI-D </td>
<td>640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768, 1,280x800,
1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900, 1,600x900,
1,680x1,050, 1,920x1,080 (16,770,000 colors) </td>
</tr>
<tr>
<td>Display Port </td>
<td>640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768, 1,280x800,
1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900, 1,600x900,
1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors) </td>
</tr>
<tr>
<td colspan="2" rowspan="2">CFast card slot </td>
<td>1 slot, CFast CARD Type I x 1 bootable </td>
</tr>
<tr>
<td>BX-830D-DC73131x: Built-in CFast card slot (SLC) (16GB, 1 partition) *1<br>
BX-830D-DC781724: Built-in CFast card slot (Q-MLC) (32GB, 1 partition) *1<br>
Other models: none </td>
</tr>
<tr>
<td colspan="2">LAN *2 </td>
<td>Intel I210IT Controller<br>
1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support) </td>
</tr>
<tr>
<td colspan="2">USB </td>
<td>USB 3.0 compliant 1 port<br>
USB 2.0 compliant 2 port </td>
</tr>
<tr>
<td colspan="2">Serial I/F </td>
<td>RS-232C (general-purpose): 2 port (SERIAL PORTA, B),<br>
9pin D-SUB connector (male), Baud rate: 50 - 115,200bps<br>
RS-422/485 (general-purpose) 1 port, Baud rate: 50 - 115,200bps </td>
</tr>
<tr>
<td colspan="2">Watchdog timer </td>
<td>WDT: Software programmable, 1sec - 255sec (Time up allows reset, interrupt, or
external output) </td>
</tr>
<tr>
<td colspan="2">General-purpose I/O </td>
<td>Photocoupler insulation inputs/outputs (3 of each)<br>
(However, one output can be switched to WDT external output.) </td>
</tr>
<tr>
<td colspan="2">Hardware monitoring </td>
<td>Monitoring CPU temperature, power voltage </td>
</tr>
<tr>
<td colspan="2">RTC/CMOS </td>
<td>Lithium backup battery life: 10 years or more.<br>
The real-time clock is accurate within ±3 minutes (at 25°C) per month </td>
</tr>
<tr>
<td colspan="2">Power Management </td>
<td>Power management setup via BIOS, Power On by Ring / Wake On LAN, Supports
PC98/PC99 ACPI Power management </td>
</tr>
<tr>
<td rowspan="6">Interface </td>
<td>Display </td>
<td>DVI-I x 1 (29pin DVI-I connector), Display Port x1</td>
</tr>
<tr>
<td>CFast card slot </td>
<td>1 slot, CFast CARD Type I x 1, bootable
BX-830D-DC700000: -,<br>
BX-830D-DC73131x: Built-in CFast card slot contains a CFast card(SLC), (16GB, 1
partition)*1<br>
BX-830D-DC781724: Built-in CFast card slot contains a CFast card (Q-MLC) .
(32GB, 1 partition)*1 </td>
</tr>
<tr>
<td>LAN *2 </td>
<td>2 port (RJ-45 connector) </td>
</tr>
<tr>
<td>USB </td>
<td>USB3.0 compliant 1port (TYPE-A connector x1)<br>
USB2.0 compliant 2port (TYPE-A connector x2) </td>
</tr>
<tr>
<td>RS-232C </td>
<td>2 port (9pin D-SUB connector [male]) </td>
</tr>
<tr>
<td>RS-422/485/
General-purpose I/O </td>
<td>1 port (15pin D-SUB connector [female]) </td>
</tr>
<tr>
<td rowspan="4">Power supply </td>
<td>Rated input voltage </td>
<td>12 - 24VDC *3</td>
</tr>
<tr>
<td>Range of input voltage </td>
<td>10.8 - 33.6VDC </td>
</tr>
<tr>
<td>Power consumption </td>
<td>12V 2.2A, 24V 1.2A </td>
</tr>
<tr>
<td>External device power
supply capacity </td>
<td>CFast card slot: 3.3V: 0.5A(500mAx1)<br>
USB3.0 I/F: +5V: 0.9A (900mAx1)<br>
USB2.0 I/F: +5V: 1A (500mAx2) </td>
</tr>
<tr>
<td colspan="2">Physical dimensions
(mm) </td>
<td>182 (W) x 118.9(D) x 49.8(H) (No protrusions) </td>
</tr>
<tr>
<td colspan="2">Weight </td>
<td>About 1.3kg (Excluding attachment fittings) </td>
</tr>
</tbody></table>
*1 The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized
from OS might be displayed fewer than an actual value.<br>
*2 If you use the 1000BASE-T, be careful of the operating temperature.
For more details on this, refer to chapter3, Installation Requirements.<br>
*3 Use a power cable shorter than 3m.

<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="2"><strong>Model</strong></td>
<td width="60%"><strong>BX-830D-DC7xxxxx</strong></td>
</tr>
<tr>
<td colspan="2">Operating temperature *4</td>
<td>-40 - +70°C (With 1000BASE-T: -40 - +65°C), airflow 0.5m/s<br>
-40 - +60°C (With 1000BASE-T: -40 - +55°C), no airflow</td>
</tr>
<tr>
<td colspan="2">Storage temperature </td>
<td>-40 - 80°C </td>
</tr>
<tr>
<td colspan="2">Humidity </td>
<td>10 - 90%RH(No condensation) </td>
</tr>
<tr>
<td colspan="2">Floating dust particles </td>
<td>Not to be excessive </td>
</tr>
<tr>
<td colspan="2">Corrosive gases </td>
<td>None </td>
</tr>
<tr>
<td rowspan="2">Line-Noise resistance </td>
<td>Line-noise </td>
<td>AC line / ±2kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)*5,<br>
Signal line / ±1kV (IEC61000-4-4 Level 4, EN61000-4-4 Level 3) </td>
</tr>
<tr>
<td>Static electricity resistance </td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 2)<br>
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-
2 Level 3) </td>
</tr>
<tr>
<td>Vibration resistance </td>
<td>Sweep resistance </td>
<td>10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G<br>
60 min. each in x, y, and z directions<br>
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant) </td>
</tr>
<tr>
<td colspan="2">Impact resistance </td>
<td>100G, half-sine shock for 6 ms in x, y, and z directions<br>
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant) </td>
</tr>
<tr>
<td colspan="2">Grounding </td>
<td>Class D grounding, SG-FG / continuity </td>
</tr>
<tr>
<td colspan="2">Standard </td>
<td>VCCI Class A, FCC Class A,<br>
CE Marking (EMC Directive Class A, RoHS Directive),<br>
EN45545-2, EN50155 (Class TX) *6 *7 </td>
</tr>
</tbody>
</table>
*4: For more details on this, please refer to chapter 3, “Installation Requirements”.<br>
*5: When AC adapter “ACAP19-01” is used.<br>
*6: Use USB2.0 cable shorter than 3m.<br>
*7: The line-noise resistance test, withstand voltage test, and insulation resistance test were performed with the
optional AC adapter ACAP19-01 connected. Only the BX-830D conforms to this standard. Prepare a power
supply that conforms to EN50155.</div>

+ Add unique tab for product page

BX-956S - Fanless Embedded PC

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<tbody>
<tr>
<td width="10%"><strong>Model</strong></td>
<td width="30%"><strong>BX-956SD-DC881724</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>BX-956SD-DC781724</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>BX-956SD-DC771314</strong></td>
</tr>
<tr>
<td>Procesor</td>
<td>Intel® Atom™ Processor E3845 1.91GHz</td>
<td style="border-left: 1px solid #cdd0d4;">Intel® Atom™ Processor E3845 1.91GHz</td>
<td style="border-left: 1px solid #cdd0d4;">Intel® Atom™ Processor E3845 1.91GHz</td>
</tr>
<tr>
<td>Display</td>
<td>DVI-D</td>
<td style="border-left: 1px solid #cdd0d4;">DVI-D</td>
<td style="border-left: 1px solid #cdd0d4;">DVI-D</td>
</tr>
<tr>
<td>Memory</td>
<td>8GB ECC</td>
<td style="border-left: 1px solid #cdd0d4;">4GB ECC</td>
<td style="border-left: 1px solid #cdd0d4;">4GB ECC</td>
</tr>
<tr>
<td>Ethernet</td>
<td>Intel I210IT Controller, 1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)</td>
<td style="border-left: 1px solid #cdd0d4;">Intel I210IT Controller, 1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)</td>
<td style="border-left: 1px solid #cdd0d4;">Intel I210IT Controller, 1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)</td>
</tr>
<tr>
<td>Serial</td>
<td>RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male), Baud rate : 50 - 115,200bps</td>
<td style="border-left: 1px solid #cdd0d4;">RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male), Baud rate : 50 - 115,200bps</td>
<td style="border-left: 1px solid #cdd0d4;">RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male), Baud rate : 50 - 115,200bps</td>
</tr>
<tr>
<td>USB</td>
<td>USB 3.0 compliant 1 port, USB 2.0 compliant 5 port</td>
<td style="border-left: 1px solid #cdd0d4;">USB 3.0 compliant 1 port, USB 2.0 compliant 5 port</td>
<td style="border-left: 1px solid #cdd0d4;">USB 3.0 compliant 1 port, USB 2.0 compliant 5 port</td>
</tr>
<tr>
<td>Storage</td>
<td>Q-MLC 32GB CFAST</td>
<td style="border-left: 1px solid #cdd0d4;">Q-MLC 32GB CFAST</td>
<td style="border-left: 1px solid #cdd0d4;">Q-MLC 16GB CFAST</td>
</tr>
<tr>
<td>Dimensions</td>
<td>8.11 x 10.51 x 3.66 in</td>
<td style="border-left: 1px solid #cdd0d4;">8.11 x 10.51 x 3.66 in</td>
<td style="border-left: 1px solid #cdd0d4;">8.11 x 10.51 x 3.66 in</td>
</tr>
<tr>
<td>Weigth</td>
<td>3.42 lbs</td>
<td style="border-left: 1px solid #cdd0d4;">3.42 lbs</td>
<td style="border-left: 1px solid #cdd0d4;">3.42 lbs</td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>(1) Horizontal installation : 0 - 50°C(With 1000BASE-T : 0 - 45°C), (2) Vertical installation other than above : 0 - 45°C(With 1000BASE-T : 0 -
40°C)</td>
<td style="border-left: 1px solid #cdd0d4;">(1) Horizontal installation : 0 - 50°C(With 1000BASE-T : 0 - 45°C), (2) Vertical installation other than above : 0 - 45°C(With 1000BASE-T : 0 -
40°C) </td>
<td style="border-left: 1px solid #cdd0d4;">(1) Horizontal installation : 0 - 50°C(With 1000BASE-T : 0 - 45°C), (2) Vertical installation other than above : 0 - 45°C(With 1000BASE-T : 0 -
40°C)</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-10 - 60°C</td>
<td style="border-left: 1px solid #cdd0d4;">-10 - 60°C</td>
<td style="border-left: 1px solid #cdd0d4;">-10 - 60°C</td>
</tr>
<tr>
<td>Humidity</td>
<td>10 - 90% RH (No condensation)</td>
<td style="border-left: 1px solid #cdd0d4;">10 - 90% RH (No condensation)</td>
<td style="border-left: 1px solid #cdd0d4;">10 - 90% RH (No condensation)</td>
</tr>
	<tr>
<td>Operating System</td>
<td>Windows 10 IoT Enterprise LTSB 2016 64bit</td>
<td style="border-left: 1px solid #cdd0d4;">Windows 10 IoT Enterprise LTSB 2016 64bit</td>
<td style="border-left: 1px solid #cdd0d4;">Windows Embedded Standard 7 32bit</td>
</tr>
<tr>
<td>Line Noise Resistance</td>
<td>AC line / ±2kV *5, Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;">AC line / ±2kV *5, Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;">AC line / ±2kV *5, Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static Electricity Resistance</td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;">Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;">Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
<td>Vibration Resistance</td>
<td>10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x, y, and z directions (JIS C60068-2-6compliant, IEC68-2-6-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;">10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x, y, and z directions (JIS C60068-2-6compliant, IEC68-2-6-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;">10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x, y, and z directions(JIS C60068-2-6compliant, IEC68-2-6-compliant)</td>
</tr>
<tr>
<td>Impact Resistance</td>
<td>100G, half-sine shock for 6 ms in x, y, and z directions (JIS C0041-compliant, IEC68-2-27-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;">100G, half-sine shock for 6 ms in x, y, and z directions (JIS C0041-compliant, IEC68-2-27-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;">100G, half-sine shock for 6 ms in x, y, and z directions (JIS C0041-compliant, IEC68-2-27-compliant)</td>
</tr>
<tr>
<td>Grounding</td>
<td>Class D grounding, SG-FG / continuity</td>
<td style="border-left: 1px solid #cdd0d4;">Class D grounding, SG-FG / continuity</td>
<td style="border-left: 1px solid #cdd0d4;">Class D grounding, SG-FG / continuity</td>
</tr>
<tr>
<td>Regulatory</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL/c-UL, CCC *6</td>
<td style="border-left: 1px solid #cdd0d4;">VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL/c-UL, CCC *6</td>
<td style="border-left: 1px solid #cdd0d4;">VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL/c-UL, CCC *6</td>
</tr>
</tbody>
</table>
<p><strong>Additional Configuration Options</strong></p><p><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></p>
</div>

+ Add unique tab for product page

BX-R100 - Fanless Embedded PC, Conforms to EN 50155, Train and Vehicle Mountable

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="2"><strong>Item</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td colspan="2">CPU </td>
<td>Intel® Atom™ Processor E3845(1.91GHz) </td>
</tr>
<tr>
<td colspan="2">BIOS </td>
<td>BIOS (mfd. by AMI) </td>
</tr>
<tr>
<td colspan="2">Memory </td>
<td>4GB. 204-pin SO-DIMM x 1, PC3-10600(DDR3L 1333) ECC </td>
</tr>
<tr>
<td colspan="2">Graphics Controller</td>
<td>Intel® HD Graphics (CPU integrated) </td>
</tr>
<tr>
<td>System resolution </td>
<td>DisplayPort </td>
<td>640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600, 1,280 x 720,
1,280 x 800, 1,280 x 960, 1,280 x 1,024, 1,360 x 768, 1,366 x 768, 1,400 x 1,050, 1,440
x 900, 1,600 x 900, 1,600 x 1,050, 1,920 x 1,080, 1,920 x 1,200
(16,770,000 colors)</td>
</tr>

<tr>
<td colspan="2" >mSATA (integrated) *1 </td>
<td>mSATA slot x 1, 32GB (MLC) x 1 Pre-installed</td>
</tr>
<tr>
<td colspan="2">LAN </td>
<td>Intel I210IT controller<br>
1000BASE-T/100BASE-TX/10BASE-T x 2 ports </td>
</tr>
<tr>
<td colspan="2">USB </td>
<td>USB 2.0-compliant x 2 ports</td>
</tr>
<tr>
<td colspan="2">Serial</td>
<td>RS-232C 1 port,<br>
Baud rate: 50 - 115,200bps </td>
</tr>
<tr>
<td colspan="2">Hardware monitoring</td>
<td>Monitoring CPU temperature, board temperature, power voltage </td>
</tr>
<tr>
<td colspan="2">Watchdog timer (WDT)</td>
<td>Software programmable, 255 level (1sec - 255sec)<br>
Time up allows reset shutdown. </td>
</tr>
<tr>
<td colspan="2">Real Time Clock </td>
<td>Lithium backup battery life: 10 years or longer<br>
The real-time clock is accurate within ±3 minutes (at 25°C) per month (CPU built-in
RTC).</td>
</tr>

<tr>
<td colspan="2">Power Management </td>
<td>Power management setup via BIOS<br>
Power On by Ring/Wake On LAN<br>
Supports ACPI Power management </td>
</tr>

<tr>
<td rowspan="5">Interface </td>
<td>Display </td>
<td>Display Port x 1</td>
</tr>
<tr>
<td>SD </td>
<td>SD Card Slot x 1</td>
</tr>
<tr>
<td>LAN </td>
<td>2-port (M12 connector, X-coded) </td>
</tr>
<tr>
<td>USB </td>
<td>USB2.0 compliant 2port (TYPE-A connector) </td>
</tr>
<tr>
<td>RS-232C </td>
<td>1-port (9pin D-SUB connector [male])</td>
</tr>

<tr>
<td colspan="2">Power supply </td>
<td>PoE (1-port 25.5W input, M12 8pin X-Coded connector x 1)<br>
(M12 connector, A-Coded)<br>
DC IN (1-port M12 4pin A-Coded connector x 1)<br>
Rated input voltage: 12 - 24VDC *2<br>
Range of input voltage: 10.8 - 33.6VDC<br>
Power consumption: 12V 1.4A, 24V 0.8A </td>
</tr>
<tr>
<td colspan="2">External device power supply capacity </td>
<td>USB2.0 I/F: +5V 1.0A (500mA x 2 per port)</td>
</tr>
<tr>
<td colspan="2">Physical dimensions
(mm) </td>
<td>200(W) x 185(D) x 46(H) </td>
</tr>
<tr>
<td colspan="2">Weight </td>
<td>1.7kg (approx.) </td>
</tr>
</tbody></table>
*1 The capacity of storage device in the OS pre-installed type is a value when 1GB is calculated by 1 billion bytes.
The capacity that can be recognized from OS might be displayed less than the actual value.<br>
*2 Use a power cable shorter than 3m.

<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="2"><strong>Model</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td colspan="2">Operating temperature *3</td>
<td>-40 - +70°C (With 1000BASE-T: -40 - +65°C), airflow 0.5m/s<br>
-40 - +60°C (With 1000BASE-T: -40 - +55°C), no airflow</td>
</tr>
<tr>
<td colspan="2">Storage temperature </td>
<td>-40 - +80°C </td>
</tr>
<tr>
<td colspan="2">Operating Humidity </td>
<td>10 - 90%RH(No condensation) </td>
</tr>
<tr>
<td colspan="2">Non-operating ambient humidity </td>
<td>10 - 90%RH(No condensation) </td>
</tr>
<tr>
<td colspan="2">Floating dust particles </td>
<td>Not to be excessive </td>
</tr>
<tr>
<td colspan="2">Corrosive gases </td>
<td>None </td>
</tr>
<tr>
<td rowspan="2">Line-Noise resistance </td>
<td>Line-noise </td>
<td>AC Line /±2kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3) *4<br>
Signal Line /±1kV (IEC61000-4-4 Level 4, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance </td>
<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) </td>
</tr>
<tr>
<td>Vibration resistance </td>
<td>Sweep resistance </td>
<td>10 - 57Hz /semi-amplitude vibration 0.375mm, 57 - 500Hz/5.0G<br>
60minutes each in X, Y, and Z directions (JIS C60068-2-27-compliant,<br>
IEC60068-2-27-compliant)</td>
</tr>
<tr>
<td colspan="2">Shock resistance </td>
<td>100G half-sine shock for 6ms in X, Y, and Z directions<br>
(JIS C 60068-2-27-compliant, IEC 60068-2-27-compliant) </td>
</tr>
<tr>
<td colspan="2">Grounding </td>
<td>Class D grounding, SG-FG / continuity</td>
</tr>
<tr>
<td colspan="2">Standard </td>
<td>VCCI Class A, FCC Class B,<br>
CE Marking (EMC Directive Class A, RoHS Directive),<br>
EN45545-2, EN50155 (Class TX) *5 *6 </td>
</tr>
</tbody>
</table>
*3 Vary depending on the orientation.<br>
*4 When AC adapter “ACAP19-01” is used.<br>
*5 Use a cable less than 3 meters to connect to USB 2.0 I / F.<br>
*6 The noise resistance test, withstand voltage test, and isolation resistance test are conducted by connecting the
PoE power unit "POW-CB60AT" (optional item).
This standard is applicable for the BX-R100 main body only. Use a power supply that conforms to EN50155.</div>

+ Add unique tab for product page

BX-S959SD-DC Series Fanless Embedded PC with Atom E3845 1.91GHz Quad Core 8GB Memory

For unique tab:

<div style="overflow-x:auto;">
<p><strong><a title="BX-S959SD-DC Data Sheet" href="https://www.contec.com/api/downloadlogger?download=/-/media/contec/product/datasheet/en/ds_bxs959s_en.pdf" target="_blank" rel="noopener">Download BX-S959SD-DC Data Sheet</a></strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="2"><strong>Item</strong></td>
<td width="60%"><strong>Specification</strong></td>
</tr>
<tr>
<td rowspan="8">System</td>
<td>CPU</td>
<td>Intel Atom® E3845 1.91GHz Quad Core</td>
</tr>
<tr>
<td>Chipset</td>
<td>Intel® Baytrail SoC </td>
</tr>
<tr>
<td>BIOS</td>
<td>AMI SPI BIOS</td>
</tr>
<tr>
<td>Memory</td>
<td>One 204Pin SO-DIMM socket support DDR3L 1333, 8GB</td>
</tr>
<tr>
<td>Graphic</td>
<td>Integrated Intel® HD Graphics Controller </td>
</tr>
<tr>
<td>LAN Chipset</td>
<td>2x Intel® I210IT GbE Controller</td>
</tr>
<tr>
<td>Watchdog timer</td>
<td>255-level</td>
</tr>
<tr>
<td>Expansion</td>
<td>N/A</td>
</tr>
<tr>
<td rowspan="6">External I/O</td>
<td>Display</td>
<td>1x DVI-I</td>
</tr>
<tr>
<td>LAN</td>
<td>2x RJ-45 ports for GbE</td>
</tr>
<tr>
<td>Audio</td>
<td>1x Line-out, 1x Mic-in (Realtek ALC892 HD) </td>
</tr>
<tr>
<td>Serial Port</td>
<td>3x RS-232C, 1x RS-232C/422/485 </td>
</tr>
<tr>
<td>DIO Port</td>
<td>Programmable 6-bit digital I/O </td>
</tr>
<tr>
<td>USB Port</td>
<td>6x USB 2.0, 1x USB 3.0 </td>
</tr>
<tr>
<td>Storage</td>
<td>Type </td>
<td>64G 2.5" SSD</td>
</tr>
<tr>
<td rowspan="2">Power supply</td>
<td>DC input</td>
<td>12~24 VDC</td>
</tr>
<tr>
<td>AC input</td>
<td>N/A </td>
</tr>
<tr>
<td rowspan="3">Environment</td>
<td>Operating Temperature</td>
<td>0 ~ 40°C (w/ HDD) <br>
	0 ~ 50°C (w/ wide temperature HDD/SDD)</td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-10 ~ 60°C </td>
</tr>
<tr>
<td>Storage Humidity</td>
<td>10 ~ 90%RH, non-condensing </td>
</tr>
<tr>
<td rowspan="3">Mechanical</td>
<td>Dimension (WxDXH)</td>
<td>182 x 160 x 45.6 mm</td>
</tr>
<tr>
<td>Weight</td>
<td>1.6 kg </td>
</tr>
<tr>
<td>Mounting</td>
<td>Wall mount</td>
</tr>
<tr>
<td colspan="2">OS support</td>
<td>Win 10 IoT Ent 2016 LTSC</td>
</tr>
</tbody></table>
</div>

+ Add unique tab for product page

BX-T1000 Fanless Embedded PC w/ Intel Core i7 7600U

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<tbody>
<tr>
<td width="10%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>Additional Configuration Options</strong><br /><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></td>
</tr>
<tr>
<td>Procesor</td>
<td>Intel Core i5 7300U 2.60GHz</td>
<td style="border-left: 1px solid #cdd0d4;">Intel Core i7 Processor 7600U 2.80GHz, Intel Celeron 3965U 2.20GHz</td>
</tr>
<tr>
<td>Display</td>
<td>DVI-D x 1 (25pin DVI-D connector), DisplayPort x 1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Memory</td>
<td>8 GB</td>
<td style="border-left: 1px solid #cdd0d4;">PC4-17000 (DDR4-2133)</td>
</tr>
<tr>
<td>Ethernet</td>
<td>2 port (RJ-45 connector)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Serial</td>
<td>RS-232C (general-purpose): 2port (SERIAL PORTA, B), 9pin D-SUB connector (male). Baud rate: 50 - 115,200bps</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>USB</td>
<td>USB3.0 compliant 4port (TYPE-A connector), USB2.0 compliant 2port (TYPE-A connector)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage</td>
<td>2.5 inch SSD (MLC) 256GB</td>
<td style="border-left: 1px solid #cdd0d4;">2.5 inch HDD 100GB</td>
</tr>
<tr>
<td>Dimensions</td>
<td>11.02 x 14.76 x 7.63 in</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Weigth</td>
<td>6.66lb</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>0 - 45°C</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Storage Temperature</td>
<td>-10 - 60°C</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Humidity</td>
<td>10 - 90% RH (No condensation)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
	<tr>
<td>Operating System</td>
<td>Windows 10 IoT Enterprise LTSB 2016 64bit</td>
<td style="border-left: 1px solid #cdd0d4;">Windows 10 IoT Enterprise 2019 LTSC 64bit</td>
</tr>
<tr>
<td>Line Noise Resistance</td>
<td>AC line / ±2kV *3 Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Static Electricity Resistance</td>
<td>Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Vibration Resistance</td>
<td>When the HDD is on: 10 - 50Hz/ 0.5G 25 min. each in x, y, and z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant. When the HDD is off: 10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Impact Resistance</td>
<td>10G, half-sine shock for 11 ms in x, y, and z directions (JIS C 60068-2-27-compliant, IEC 60068-2-27-compliant)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Grounding</td>
<td>Class D grounding, SG-FG / continuity</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Regulatory</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>

</tbody>
	</table></div>

+ Add unique tab for product page

BX-U200 - Fanless Embedded PC / Ultra small design / Atom x5-E3940

For unique tab:

<div style="overflow-x:auto;">
	
<p><strong>Packing List</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="60%" colspan="2"><strong></strong></td>
<td width="20%"><strong>BX-U200-NA01M03 <br>[Base Model]</strong></td>
<td width="20%"><strong>BX-U200- W19M01M03<br> [OS Pre-install Model]</strong></td>
</tr>
<tr>
<td colspan="2">Name</td>
<td>Pcs.</td>
<td>Pcs.</td>
</tr>
<tr>
<td colspan="2">The Main Body</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">USB Removal Prevention <br>Fitting</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">USB Type-C Removal <br>
Prevention Fitting</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td rowspan="2">DIO <br>
Connector <br>
Complete Set</td>
<td>Housing</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td>Contact</td>
<td>5</td>
<td>5</td>
</tr>
<tr>
<td colspan="2">3-pin Connector for Power <br>
Supply</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">Antenna</td>
<td>-</td>
<td>-</td>
</tr>
<tr>
<td colspan="2">Cable Tie</td>
<td>2</td>
<td>2</td>
</tr>
<tr>
<td colspan="2">SLIM HEAD Screw(M2.6 x 4)</td>
<td>3</td>
<td>3</td>
</tr>
<tr>
<td colspan="2">Product Guide</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">IPC Precaution List</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">Warranty Certificate</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">USB Type-C Removal <br>
Prevention Fitting</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">Serial Number Label</td>
<td>1</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">MICROSOFT SOFTWARE <br> LICENSE TERMS</td>
<td>-</td>
<td>1</td>
</tr>
<tr>
<td colspan="2">Recovery Disk</td>
<td>-</td>
<td>1</td>
</tr>
</tbody></table>
<p><strong>Function Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="2"><strong>Item</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td colspan="2">CPU</td>
<td>Intel Atom® x5-E3940 Processor 1.6GHz</td>
</tr>
<tr>
<td colspan="2">BIOS</td>
<td>BIOS (mfd. by AMI)</td>
</tr>
<tr>
<td colspan="2">Memory</td>
<td>PC3-10600 (DDR3L, 1333) ECC 4GB, On Board</td>
</tr>
<tr>
<td colspan="2">Graphics Controller </td>
<td>Intel® HD Graphics 500 (CPU integrated)</td>
</tr>
<tr>
<td rowspan="2">System resolution </td>
<td>DisplayPort</td>
<td>800 × 600, 1,024 × 768, 1,152 × 864, 1,280 × 720, 1,280 × 800, 1,280 × 1,024, 1,600 <br>
× 900, 1,920 × 1,080, 2,560 × 1,440, 3,840 × 2,160, 3,840 × 2,160 <br>
(1,6770,000 colors)</td>
</tr>
<tr>
<td>USB Type-C (DP Alt Mode)</td>
<td>800 × 600, 1,024 × 768, 1,152 × 864, 1,280 × 720, 1,280 × 800, 1,280 ×1,024, 1,600 <br>
× 900, 1,920 × 1,080, 2,560 × 1,440, 3,840 × 2,160, 3,840 × 2,160 <br>
(1,6770,000 colors)</td>
</tr>
<tr>
<td colspan="2">M.2 card slot </td>
<td>1 slot, M.2 2242, SATAIII <br>
M.2 card 32GB (MLC) mounted</td>
</tr>
<tr>
<td colspan="2">LAN </td>
<td>Intel® I210IT controller <br>
1000BASE-T/100BASE-TX/10BASE-T x 2 ports <br>
RJ-45 connector (supports Wake On LAN)</td>
</tr>
<tr>
<td colspan="2">USB </td>
<td>USB 3.1 Gen1 (USB 3.0 Type-A connector) x 2 ports <br>
USB 3.1 Gen1 (USB Type-C connector) x 1 ports</td>
</tr>
<tr>
<td colspan="2">Security (TPM) </td>
<td>TCG TPM2.0</td>
</tr>
<tr>
<td colspan="2">Hardware monitoring </td>
<td>Monitoring CPU temperature, board temperature, and power voltage</td>
</tr>
<tr>
<td colspan="2">Watchdog timer (WDT) </td>
<td>Software programmable, 255 level (1sec - 255sec), <br>
Time up allows reset, Selectable from either power OFF or external output</td>
</tr>
<tr>
<td colspan="2">General Purpose I/O </td>
<td>Non-isolated type Three inputs and Three outputs
(switchable with either remote-reset or remote power-on)</td>
</tr>
<tr>
<td colspan="2">Real Time Clock </td>
<td>Lithium backup battery life: 10 years or more <br>
The real-time clock is accurate within ±3 minutes (at 25°C) per month (CPU
integrated RTC).</td>
</tr>
<tr>
<td colspan="2">Power Management </td>
<td>Power management setup via BIOS <br>
Power On by Ring/Wake On LAN <br>
Supports ACPI Power management</td>
</tr>
<tr>
<td rowspan="6">Interface </td>
<td>Display</td>
<td>DisplayPort × 1 <br>
USB Type-C (DP Alt Mode) × 1 </td>
</tr>
<tr>
<td>LAN</td>
<td>2-port (RJ-45 connector)</td>
</tr>
<tr>
<td>USB</td>
<td>USB 3.0 Type-A connector 2 port <br>
USB Type-C connector 1 port</td>
</tr>
<tr>
<td>DIO</td>
<td>1 port (4pin connector)</td>
</tr>
<tr>
<td>Wireless LAN *1</td>
<td>IEEE 802.11ac/n/b/g</td>
</tr>
<tr>
<td>Bluetooth *1</td>
<td>4.2</td>
</tr>
<tr>
<td rowspan="4">Power supply </td>
<td>Rated Voltage Range</td>
<td>12 - 24VDC</td>
</tr>
<tr>
<td>Input Voltage Range</td>
<td>6 - 37VDC</td>
</tr>
<tr>
<td>Current Consumption (Max.)</td>
<td>12V 3.7A <br>
24V 1.9A</td>
</tr>
<tr>
<td>External device power supply capacity</td>
<td>USB 3.1 Gen1 Type-A I/F : +5V 1.8A (900mA×2) <br>
USB Type-C I/F : +5V 1.5A</td>
</tr>
<tr>
<td colspan="2">Physical dimensions (mm) </td>
<td>110(W) x 90(D) x 29(H) <br>
(Not including the attachment fitting or protrusions)</td>
</tr>
<tr>
<td colspan="2">Weight </td>
<td>0.42kg (approx.) <br>
(Not including the attachment fitting)</td>
</tr>
<tr>
<td colspan="2">Notes: </td>
<td>*1 Wireless LAN and Bluetooth are only available on wireless models.</td>
</tr>	
</tbody></table>

<p><strong>Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Item</strong></td>
<td width="60%"><strong>Description</strong></td>
</tr>
<tr>
<td>Operating temperature</td>
<td>-30 -+50°C *2 <br>
With external fan: -30 -+70°C</td>
</tr>
<tr>
<td>Non-operating ambient temperature</td>
<td>-30 -+70°C</td>
</tr>
<tr>
<td>Operating Humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Non-operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
	<td>AC Line /±2kV <br>
(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) <br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
	<td>Sweep resistance</td>
	<td>10 - 57Hz /semi-amplitude vibration 0.375mm, 57 - 500Hz/5.0G <br>
60minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, <br>
IEC60068-2-6-compliant)</td>
</tr>
<tr>
	<td>Fixed to VESA holes</td>
	<td>100G half-sine shock for 6ms in X, Y, and Z directions <br>
(JIS C 60068-2-27-compliant, IEC 60068-2-27-compliant)</td>
</tr>
<tr>
	<td>Mounted on DIN rail</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions <br>
(JIS C 60068-2-27-compliant, IEC 60068-2-27-compliant)</td>
</tr>
<tr>
	<td>Grounding</td>
	<td>Class D grounding, SG-FG / continuity</td>
</tr>
<tr>
	<td>Standard</td>
	<td>VCCI Class A, FCC Class A, <br>
CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
	<td>Notes:</td>
	<td>*2 Derating conditions exist</td>
</tr>
</tbody></table>
	
<p><strong>Product Lineup</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="25%"><strong>Model</strong></td>
<td width="15%"><strong>Wreless</strong></td>
<td width="35%"><strong>OS</strong></td>
<td width="25%"><strong>Storage device</strong></td>
</tr>
<tr>
<td>BX-U200-NA01M03</td>
<td rowspan="2">None</td>
<td>None</td>
<td rowspan="2">M.2 SSD
32GB(MLC)</td>
</tr>
<tr>
<td>BX-U200-W19M01M03</td>
<td>Windows 10 IoT Enterprise 2019 LTSC </td>
</tr>
</tbody></table>
</div>

+ Add unique tab for product page

CM-ME121P 12.1" PCAP Touch Medical Display

For unique tab:

<p> </p><p><strong><span style="color: #ff9900;"><a style="color: #ea7224;" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/CM-ME121P_12.1_PCAP_Medical_Monitor.pdf?v=1610555627" target="_blank" rel="noopener">Download the detailed datasheet.</a></span></strong></p>
<p> </p><table class="spec">
<tbody>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Model</strong></td>
<td style="width: 73px; height: 36px;">CM-ME121P</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Screen Size/Type</strong></td>
<td style="width: 73px; height: 36px;">12.1” TFT LCD</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Panel Ratio</strong></td>
<td style="width: 73px; height: 18px;">4:3</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Resolution</strong></td>
<td style="width: 73px; height: 36px;">1024 x 768</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Contrast Ratio</strong></td>
<td style="width: 73px; height: 36px;">700:1</td>
</tr>
<tr style="height: 168px;">
<td style="width: 105px; height: 168px;"><strong>Brightness </strong></td>
<td style="width: 73px; height: 168px;">
<p>500 nits (w/o touch screen)</p>
<p>450 nits (w/touch screen)</p>
</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Contrast Ratio</strong></td>
<td style="width: 73px; height: 36px;">700:1</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Pixel Pitch</strong></td>
<td style="width: 73px; height: 36px;">0.24 x 0.24</td>
</tr>
<tr style="height: 100px;">
<td style="width: 105px; height: 100px;"><strong>Active Area</strong></td>
<td style="width: 73px; height: 100px;">
<p class="p1">245.76 (H) x 184.32 (V) mm</p>
</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Backlight</strong></td>
<td style="width: 73px; height: 18px;">WLED</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Backlight Life</strong></td>
<td style="width: 73px; height: 36px;">30,000 hours</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Display Colors</strong></td>
<td style="width: 73px; height: 36px;">16.2 M</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Viewing Angle</strong></td>
<td style="width: 73px; height: 36px;">160/160 (H/V)</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Response Time</strong></td>
<td style="width: 73px; height: 36px;">35 ms (Tr + Tf)</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>Color Temperature</strong></td>
<td style="width: 73px; height: 54px;">9300K, 6500K, User</td>
</tr>
<tr style="height: 186px;">
<td style="width: 105px; height: 186px;"><strong>Display Modes</strong></td>
<td style="width: 73px; height: 186px;">
<p class="p1">700 x 400, 640 x 480, 640 x 350,</p>
<p class="p1">800 x 600, 1024 x 768</p>
</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Touch Technology</strong></td>
<td style="width: 73px; height: 36px;">Projected Capacitive</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Multi-Touch Point</strong></td>
<td style="width: 73px; height: 36px;">Up to 10 points</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>Input Method</strong></td>
<td style="width: 73px; height: 54px;">Finger, Thin Gloves</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Interface</strong></td>
<td style="width: 73px; height: 18px;">USB</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Touch Controller</strong></td>
<td style="width: 73px; height: 36px;">EETI</td>
</tr>
<tr style="height: 132px;">
<td style="width: 105px; height: 132px;"><strong>Multi-Touch OS Support</strong></td>
<td style="width: 73px; height: 132px;">
<p class="p1">Win 7, Win 8, Win 10, Linux,</p>
<p class="p1">QNX 6.51</p>
</td>
</tr>
<tr style="height: 132px;">
<td style="width: 105px; height: 132px;"><strong>Single-Touch OS Support</strong></td>
<td style="width: 73px; height: 132px;">
<p class="p1">Win 7, Win 8, Win 10, Linux,</p>
<p class="p1">QNX 6.51</p>
</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Power Input</strong></td>
<td style="width: 73px; height: 18px;">24V DC</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>Power Consumption (Typ.)</strong></td>
<td style="width: 73px; height: 54px;"><20 W</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Power Adapter</strong></td>
<td style="width: 73px; height: 18px;">AC to DC, DC 24V/1A, 24W Adapter (Sold Separately)</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>HDMI</strong></td>
<td style="width: 73px; height: 54px;">
<p>x1</p>
</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>VGA</strong></td>
<td style="width: 73px; height: 54px;">x1</td>
</tr>
<tr style="height: 54px;">
<td style="width: 105px; height: 54px;"><strong>USB 2.0</strong></td>
<td style="width: 73px; height: 54px;">
<p class="p1">x2</p>
</td>
</tr>
<tr style="height: 90px;">
<td style="width: 105px; height: 90px;"><strong>DC Power</strong></td>
<td style="width: 73px; height: 90px;">5.5 mm / 2.5 mm x 1 (locking barrel)</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Audio</strong></td>
<td style="width: 73px; height: 36px;">
<p class="p1">2.5 W (8 ohm) speaker x 1 (rear facing)</p>
</td>
</tr>
<tr style="height: 18px;">
<td style="width: 105px; height: 18px;"><strong>Dimensions</strong></td>
<td style="width: 73px; height: 18px;">
<p class="p1">310.68 x 248.68 x 49 (mm)</p>
</td>
</tr>
<tr style="height: 90px;">
<td style="width: 105px; height: 90px;"><strong>Net Weight</strong></td>
<td style="width: 73px; height: 90px;">3.7 kg</td>
</tr>
<tr>
<td style="width: 105px;"><strong>Mounting</strong></td>
<td style="width: 73px;">VESA Mount (75 x 75)</td>
</tr>
<tr>
<td style="width: 105px;"><strong>Chassis Color</strong></td>
<td style="width: 73px;">Black</td>
</tr>
<tr style="height: 36px;">
<td style="width: 105px; height: 36px;"><strong>Operating Temperature</strong></td>
<td style="width: 73px; height: 36px;">5~40° C</td>
</tr>
<tr>
<td style="width: 105px;"><strong>Storage Temperature</strong></td>
<td style="width: 73px;">-10 to 60° C</td>
</tr>
<tr>
<td style="width: 105px;"><strong>Certifications</strong></td>
<td style="width: 73px;">FCC-B, CE
<p class="p1">IEC 61326-1:2012,</p>
<p class="p1">IEC 60601-1-2:2014</p>
<p class="p1">RoHS 3</p>
</td>
</tr>
<tr>
<td style="width: 105px;"><strong>Warranty</strong></td>
<td style="width: 73px;">
<p>1-Year standard </p>
<p>Extended warranty options available</p>
</td>
</tr>
</tbody>
</table>
<p> </p><p><strong><span style="color: #ff9900;"><a style="color: #ea7224;" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/CM-ME121P_12.1_PCAP_Medical_Monitor.pdf?v=1610555627" target="_blank" rel="noopener">Download the detailed datasheet.</a></span></strong></p>
<p> </p>

+ Add unique tab for product page

COM-1(USB)H Serial Communication USB I/O Unit

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of channels</td>
<td>1 channel</td>
</tr>
<tr>
<td>I/O specification</td>
<td>RS-232C</td>
</tr>
<tr>
<td>Transfer method</td>
<td>Asynchronous serial transfer</td>
</tr>
<tr>
<td>Baud rate</td>
<td>300 - 921,600bps *1*2</td>
</tr>
<tr>
<td>Data length</td>
<td>7, 8 bit / 1, 2 stop bit</td>
</tr>
<tr>
<td>Parity check</td>
<td>Even, Odd, Non-parity</td>
</tr>
<tr>
<td>Loading LSI</td>
<td>FT232BL, Mounting the FIFO memory as the common buffer of RS-422A/RS-485 communication and USB. Sending: 128byte / receiving: 384byte (by the view of PC)</td>
</tr>
<tr>
<td>Connecting distance</td>
<td>Within 15m</td>
</tr>
<tr>
<td>Connector specification</td>
<td>USB side : USB A connector, RS-232C side : 9 pin D-SUB connector (female)</td>
</tr>
<tr>
<td>Operation guaranteed voltage</td>
<td>5V±5% *3</td>
</tr>
<tr>
<td>Power consumption</td>
<td>5VDC 50mA(Max.) *3</td>
</tr>
<tr>
<td>Operating condition</td>
<td>0 - 50°C, 10 - 90% RH (No condensation)</td>
</tr>
<tr>
<td>USB bus specification</td>
<td>USB Specification 1.1/2.0 standard</td>
</tr>
<tr>
<td>Power supply</td>
<td>Only bus power</td>
</tr>
<tr>
<td>USB transmission speed</td>
<td>12Mbps (full speed mode)</td>
</tr>
<tr>
<td>Cable length</td>
<td>1.8m</td>
</tr>
<tr>
<td>Physical dimension(mm)</td>
	<td>78.3(W) x 20.5(D) x 36.5(H) <br>
	91.0(W) x 20.5(D) x 36.5(H) (When connecting gender changer)</td>
</tr>
<tr>
<td>Weight</td>
<td>130g, 140g (When connecting gender changer)</td>
</tr>
<tr>
<td>Standard</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
<td>Notes</td>
<td>*1 Data transmission at high speed may not be performed normally depending on the environment including the type of status of connected material of cable and environment.<br>
*2 These items can be set by software.<br>
*3 It doesn't correspond to Low-power Bus-powered Function (4.4V operation).</td>
</tr>
</tbody>
	</table></div>

+ Add unique tab for product page

COM-1PD(USB)H Serial Communication USB I/O Unit

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of channels</td>
<td>1 channel</td>
</tr>
<tr>
<td>I/O specification</td>
<td>RS-422A / RS-485</td>
</tr>
<tr>
<td>Isolated specification</td>
<td>Bus isolation</td>
</tr>
<tr>
<td>Dielectric strength</td>
<td>300VDC</td>
</tr>
<tr>
<td>Transfer method</td>
<td>Asynchronous serial transfer (Full-duplex / half-duplex)</td>
</tr>
<tr>
<td>Baud rate</td>
<td>300 - 921,600bps *1*2</td>
</tr>
<tr>
<td>Data length</td>
<td>7, 8 bit / 1, 2 stop bit</td>
</tr>
<tr>
<td>Parity check</td>
<td>Even, Odd, Non-parity</td>
</tr>
<tr>
<td>Loading LSI</td>
<td>FT232BL Mounting the FIFO memory as the common buffer of RS-422A/RS-485 communication and USB. Sending: 128byte / receiving: 384byte (by the view of PC)</td>
</tr>
<tr>
<td>Connecting distance</td>
<td>Within 1200m</td>
</tr>
<tr>
<td>Connector specification</td>
<td>USB side : USB A connector, RS-422A/485 side : 9 pin D-SUB connector (male)</td>
</tr>
<tr>
<td>Operation guaranteed voltage</td>
<td>5V±5%</td>
</tr>
<tr>
<td>Power consumption</td>
<td>5VDC 350mA (Max.)</td>
</tr>
<tr>
<td>Operating condition</td>
<td>0 - 50°C, 10 - 90% RH (No condensation)</td>
</tr>
<tr>
<td>USB bus specification</td>
<td>USB Specification 1.1/2.0 standard</td>
</tr>
<tr>
<td>Power supply</td>
<td>Only bus power</td>
</tr>
<tr>
<td>USB transmission speed</td>
	<td>12Mbps (full speed mode)</td>
</tr>
<tr>
<td>Cable length</td>
<td>1.8m</td>
</tr>
<tr>
<td>Physical dimension (mm)</td>
<td>68.3(W) x 20.5(D) x 36.5(H)</td>
</tr>
<tr>
<td>Weight</td>
<td>130g</td>
</tr>
<tr>
<td>Standard</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
<td>Notes</td>
<td>*1 Data transmission at high speed may not be performed normally depending on the environment including the type of status of connected material of cable and environment.<br>
*2 These items can be set by software.</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CONPRO-H9320 High Performance Industrial AI Computer

For unique tab:

<table class="spec">
<tbody>
<tr>
<td width="30%" colspan="3"><center><strong>Product Specification</strong></center></td>
</tr>
<tr>
<td rowspan="4"><strong>Processor</strong></td>
<td>CPU </td>
<td>The 8th generation Intel® Celeron® /Pentium® / i3 / i5 /i7 desktop processor families (Coffee Lake) ,TDP =
45W(heat dissipation in fan) </td>
</tr>
<tr>
<td>CPU slot</td>
<td>Coffee Lake LGA1151 </td>
</tr>
<tr>
<td>Chipset </td>
<td>Intel H310 Chipset</td>
</tr>
<tr>
<td>BIOS</td>
<td>128M flash ROM，AMI UEFI BIOS, CPU temperature, voltage monitored by real time</td>
</tr>
<tr>
<td><strong> Artificial Intelligence</strong></td>
<td>Parameter</td>
<td>Supports Cambricon PCIE connector, full-height, full-length passive dissipation accelerator, Calculating power of 32T
(INT8), decodes 32 streams and codes 16 streams<br>
Supports Cambricon PCIE connector, half-height, half-length passive dissipation accelerator, Calculating power of
16T (INT8), without decoding</td>
</tr>
<tr>
<td rowspan="2"><strong>RAM </strong></td>
<td>Connector</td>
<td>2 x DDR4L SO-DIMM，@1.35V，DDR4L-2133/2400 MHz</td>
</tr>
<tr>
<td>Capacity</td>
<td>Up to 2*16G </td>
</tr>

<tr>
<td><strong>Memory </strong> </td>
<td>Connector </td>
<td>Motherboard 1 x MSATA 3.0，1x SATA PSU connector <br>
The whole build has 2.5”HDD bracket, which supports a HDD of 9.5 mm in thickness. Has a lock and can be inserted
or pulled.<br>
1 x M.2 2242/2280 (switch over SATA/PCIE by switching on/off) </td>
</tr>
<tr>
<td rowspan="2"><strong>Display </strong> </td>
<td>Chipset </td>
<td>CPU integrated with Intel® HD Graphics </td>
</tr>
<tr>
<td>Output </td>
<td>1 x HDMI IN <br>
1 x HDMI OUT（Maximum resolution supported：4096x2304, @24Hz）<br>
HDMI IN/HDMI OUT (used at different times）
 </td>
</tr>
<tr>
<td rowspan="3"><strong>Network </strong> </td>
<td>Chipset </td>
<td>1 x Intel® Gb Ethernet Connection；LAN1：i210AT </td>
</tr>
<tr>
<td>Connector </td>
<td>1 x RJ45 Lan connector </td>
</tr>
<tr>
<td>WiFi & 3G/4G </td>
<td>1 x M.2 2230 slot（optional half height WiFi/half height 4G module）<br>
1 x SIM slot </td>
</tr>
<tr>
<td rowspan="2"><strong>Audio </strong> </td>
<td>Chipset </td>
<td>Realtek ALC662VD six channel sound chip </td>
</tr>
<tr>
<td>Port </td>
<td>1 x Mic-in + 1 x Audio-out </td>
</tr>
<tr>
<td><strong>I/O Connector  </strong></td>
<td>USB </td>
<td>4 x USB 3.0 on the system and 2* USB2.0 pin on motherboard </td>
</tr>
<tr>
<td><strong>Extension connector </strong> </td>
<td>PCIe </td>
<td>1 x PCIE 3.0 x 16 (supports GPU Card, Accelerator, all kinds of boards that can be connected to PCIe ) ② </td>
</tr>

<tr>
<td rowspan="5"><strong>PSU </strong> </td>
<td>Type </td>
<td>DC 19V 9.47A adapter </td>
</tr>
<tr>
<td>Connector </td>
<td>1 x 4pin socket </td>
</tr>
<tr>
<td>Input power voltage </td>
<td>Supports 12 -28V (default 19 V adapter) </td>
</tr>
<tr>
<td>Power for AI  </td>
<td>Motherboard 1x6 PIN +12V connector provides 12 V to accelerator (< 120W)
PCLe * 16 connector provides power for low power accelerator </td>
</tr>
<tr>
<td>Power consumption  </td>
<td>system<180W, motherboard <65W, Accelerator < 120W（via motherboard 1x6 PIN +12V power supply connector
120W） </td>
</tr>
<tr>
<td rowspan="2"><strong>FAN </strong> </td>
<td>Socket </td>
<td>1x4pin CPU fan socket (with speed control)<br>
1x3pin system fan socket (without speed control) </td>
</tr>
<tr>
<td>Fan </td>
<td>1x super thin fine copper mute CPU fan, 4pin with speed control<br>
Default set: 2x 40mm*40mm*20mm 7000 rounds of system fan, 2pin without speed control, noise level 23 db (when
using full-height, full-lengthen accelerator)
 </td>
</tr>
<tr>
<td rowspan="2"><strong>LED / Button </strong> </td>
<td>Start </td>
<td>1 x “ON” button (displays status)<br>
1 x external signal connector for “ON” and “OFF” </td>
</tr>
<tr>
<td>Reset / Restart </td>
<td>Pin for “reset and restart” on card (pressing 0.2-1 seconds to restart when power on </td>
</tr>
<tr>
<td><strong>Watchdog </strong> </td>
<td>Output/interval </td>
<td>Suspending / restart / 255-level time interval </td>
</tr>

<tr>
<td><strong>OS </strong> </td>
<td>Version </td>
<td>Windows 7/8.1/10, Linux Ubunto 16.04/18.04 </td>
</tr>

</tbody></table>
</div>

+ Add unique tab for product page

Contec 1U Rack Mount Industrial Performance Server

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Product Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>System Description</strong></td>
<td width="60%" colspan="2"><strong>1U Rack Mount System</strong></td>
</tr>
<tr>
<td>Processor </td>
<td colspan="2">(2) LGA3647-0 (Socket P) processor sockets.* See below. </td>
</tr>
<tr>
<td>Memory  </td>
<td colspan="2">16 total DIMM slots<br>
8 DIMM slots across 6 memory channels per processor<br>
1 DIMM slot per memory channel on 4 channels<br>
2 DIMM slots per memory channel on 2 channels<br>
Supported memory: Registered DDR4 (RDIMM), Load Reduced DDR4
(LRDIMM)<br>
Memory data transfer rate up to 2666 MT/s (processor SKU
dependent)<br>
DDR4 standard voltage of 1.2 V </td>
</tr>
<tr>
<td>Chipset</td>
<td colspan="2">Intel® C624 Chipset </td>
</tr>
<tr>
<td>Local Area Network (LAN)</td>
<td colspan="2">Dual port RJ45 10 GbE on board  </td>
</tr>
<tr>
<td>Expansion Slots</td>
<td colspan="2">(1) PCIe* 3.0 x16 slot (x16 electrical) handled by CPU1via riser</td>
</tr>
<tr>
<td>Video </td>
<td colspan="2">Integrated 2D video controller <br>
16 MB of DDR4 video memory </td>
</tr>
<tr>
<td>RAID </td>
<td colspan="2">Embedded SATA software RAID<br>
Intel® RSTe 5.0<br>
Intel® Embedded Server RAID Technology 2 1.60 with optional RAID 5
key support</td>
</tr>
<tr>
<td>Server Management </td>
<td colspan="2">Integrated baseboard management controller, IPMI 2.0 compliant<br>
Support for Intel® Server Management software<br>
Dedicated onboard RJ45 management port<br>
Advanced server management via Intel® RMM4 Lite (accessory option)</td>
</tr>
<tr>
<td>Security</td>
<td colspan="2">Password protection <br>
Front panel lockout <br>
Trusted Platform Module (TPM 2.0)<br>
Intel® Trusted Execution Technology (Intel® TXT)</td>
</tr>
<tr>
<td>GPU Support</td>
<td colspan="2">Supports actively cooled single slot width GPU in both single and dual processor configurations.</td>
</tr>
<tr>
<td>Storage</td>
<td colspan="2">(2) Internal M.2 connectors – SATA / PCIe* 2280 form factor<br>
	(10) x SATA 6 Gbps 2.5" hot-swap HDD/SSD bays, or <br>
	(8) x SAS 2.5" hot-swap HDD/SSD bays</td>
</tr>
<tr>
<td> External Connectors</td>
<td colspan="2">(2) Rear Panel USB 2.0 ports <br>
(2) Rear Panel USB 3.0 ports <br>
(1) DB-15 external connector <br>
(1) Front Panel USB 3.0 ports </td>
</tr>
<tr>
<td>Power Supply </td>
<td colspan="2">750W 1U 1+1 Redundant PSU</td>
</tr>
<tr>
<td>Dimensions </td>
<td colspan="2">26" x 19" x 1.75"</td>
</tr>
<tr>
<td> Operating Temp</td>
<td colspan="2">5 to 40 °C</td>
</tr>
<tr>
<td>Operating Humidity (Max) </td>
<td colspan="2">85% (Non-Condensing)</td>
</tr>
<tr>
<td>Operating Altitude (Max) </td>
<td colspan="2">2,000 Meters</td>
</tr>
<tr>
<td rowspan="5"><b>Regulatory</b> </td>
<td><b>Regulatory</b></td>
<td><b>Standard met for Compliance</b></td>
</tr>
<tr>
<td> EU Directive 2014/35/EU</td>
<td>IEC62368-1</td>
</tr>
<tr>
<td>EU Directive 2004/108/EC </td>
<td>EN55032:2015 + AC:2016-07 Class B, EN55035:2010 + A1:2005, EN61000-3-2:2014,
EN61000-3-3:2013</td>
</tr>
<tr>
<td>North American Safety  </td>
<td>CSA/UL 62368-1 via CSA Mark</td>
</tr>
<tr>
<td>North American EMI </td>
<td>FCC 47 CFR part 15 Subpart B, ICES-003 Issue 6:2016</td>
</tr>
<tr>
<td>Life Cycle  </td>
<td colspan="2">8+ years from date of introduction. Includes managed Bill of Materials with advanced notification of change.
</td>
</tr>
</tbody></table>

<p><strong>*1U Compatible CPUs</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="15%"><strong>Model #</strong></td>
<td width="14%"><strong>Cache</strong></td>
<td width="14%"><strong>Cores</strong></td>
<td width="14%"><strong>Threads</strong></td>
<td width="14%"><strong>Base Freq.</strong></td>
<td width="14%"><strong>Turbo Freq.</strong></td>
<td width="15%"><strong>Memory Type</strong></td>
</tr>
<tr>
<td>5218T </td>
<td>22 MB</td>
<td>16 </td>
<td>32</td>
<td>2.10 GHz </td>
<td>3.80 GHz</td>
<td>DDR4-2667 </td>
</tr>
<tr>
<td>5215 </td>
<td>13.7 MB </td>
<td>10 </td>
<td>20 </td>
<td>2.50 GHz </td>
<td>3.40 GHz </td>
<td>DDR4-2667 </td>
</tr>
<tr>
<td>4216 </td>
<td>22 MB </td>
<td>16 </td>
<td>32 </td>
<td>2.10 GHz </td>
<td>3.20 GHz </td>
<td>DR4-2400 </td>
</tr>
<tr>
<td>4214 </td>
<td>17 MB </td>
<td>12 </td>
<td>24 </td>
<td>2.20 GHz </td>
<td>3.20 GHz </td>
<td>DR4-2400 </td>
</tr>
<tr>
<td>4215 </td>
<td>11 MB </td>
<td>8 </td>
<td>16 </td>
<td>2.50 GHz </td>
<td>3.50 GHz </td>
<td>DR4-2400 </td>
</tr>
<tr>
<td>4210 </td>
<td>14 MB </td>
<td>10 </td>
<td>20 </td>
<td>2.20 GHz </td>
<td>3.20 GHz </td>
<td>DR4-2400 </td>
</tr>
<tr>
<td>4209T </td>
<td>11 MB </td>
<td>8 </td>
<td>16 </td>
<td>2.20 GHz </td>
<td>3.20 GHz </td>
<td>DR4-2400 </td>
</tr>

</tbody></table>
</div>

+ Add unique tab for product page

Contec 2U Rack Mount Industrial Performance Server

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Product Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>System Description</strong></td>
<td width="60%" colspan="2"><strong>2U Rack Mount </strong></td>
</tr>
<tr>
<td>Processor </td>
<td colspan="2">(2) LGA3647-0 (Socket P) processor sockets.
Compatible with 1 or 2 of any supported CPU. </td>
</tr>
<tr>
<td>Memory  </td>
<td colspan="2">16 total DIMM slots<br>
8 DIMM slots across 6 memory channels per processor<br>
1 DIMM slot per memory channel on 4 channels<br>
2 DIMM slots per memory channel on 2 channels<br>
Supported memory: Registered DDR4 (RDIMM), Load Reduced DDR4
(LRDIMM)<br>
Memory data transfer rate up to 2666 MT/s (processor SKU
dependent)<br>
DDR4 standard voltage of 1.2 V </td>
</tr>
<tr>
<td>Chipset</td>
<td colspan="2">Intel® C624 Chipset </td>
</tr>
<tr>
<td>Local Area Network (LAN)</td>
<td colspan="2">Dual port RJ45 10 GbE on board <br>Optional Dual port RJ45 10 GbE riser   </td>
</tr>
<tr>
<td>Expansion Slots</td>
<td colspan="2">(1) PCIe* 3.0 x16 slot (x16 electrical)
handled by CPU1via riser <br>
(1) Dual port RJ45 10 GbE via riser
</td>
</tr>
<tr>
<td>Video </td>
<td colspan="2">Integrated 2D video controller <br>
16 MB of DDR4 video memory </td>
</tr>
<tr>
<td>RAID </td>
<td colspan="2">Embedded SATA software RAID<br>
Intel® RSTe 5.0<br>
Intel® Embedded Server RAID Technology 2 1.60 with optional RAID 5
key support</td>
</tr>
<tr>
<td>Server Management </td>
<td colspan="2">Integrated baseboard management controller, IPMI 2.0 compliant<br>
Support for Intel® Server Management software<br>
Dedicated onboard RJ45 management port<br>
Advanced server management via Intel® RMM4 Lite (accessory option)</td>
</tr>
<tr>
<td>Security</td>
<td colspan="2">Password protection <br>
Front panel lockout <br>
Trusted Platform Module (TPM 2.0)<br>
Intel® Trusted Execution Technology (Intel® TXT)</td>
</tr>
<tr>
<td>GPU Support</td>
<td colspan="2">Supports actively cooled single GPU in both single and dual processor configurations.</td>
</tr>
<tr>
<td>Storage</td>
<td colspan="2">(2) Internal M.2 connectors – SATA / PCIe* 2280 form factor<br>
(10) x SATA 6 Gbps 2.5" hot-swap HDD/SSD bays, or <br>
(8) x SAS 2.5" hot-swap HDD/SSD bays</td>
</tr>
<tr>
<td> External Connectors</td>
<td colspan="2">(2) Rear Panel USB 2.0 ports <br>
(2) Rear Panel USB 3.0 ports <br>
(1) DB-15 external connector <br>
(1) Front Panel USB 3.0 ports </td>
</tr>
<tr>
<td>Power Supply </td>
<td colspan="2">1200W 1U 1+1 Redundant PSU</td>
</tr>
<tr>
<td>Dimensions </td>
<td colspan="2">-</td>
</tr>
<tr>
<td> Operating Temp</td>
<td colspan="2">5 to 40 °C</td>
</tr>
<tr>
<td>Operating Humidity (Max) </td>
<td colspan="2">85% (Non-Condensing)</td>
</tr>
<tr>
<td>Operating Altitude (Max) </td>
<td colspan="2">2,000 Meters</td>
</tr>
<tr>
<td rowspan="5"><b>Regulatory</b> </td>
<td><b>Regulatory</b></td>
<td><b>Standard met for Compliance</b></td>
</tr>
<tr>
<td> EU Directive 2014/35/EU</td>
<td>IEC62368-1</td>
</tr>
<tr>
<td>EU Directive 2004/108/EC </td>
<td>EN55032:2015 + AC:2016-07 Class B, EN55035:2010 + A1:2005, EN61000-3-2:2014,
EN61000-3-3:2013</td>
</tr>
<tr>
<td>North American Safety  </td>
<td>CSA/UL 62368-1 via CSA Mark</td>
</tr>
<tr>
<td>North American EMI </td>
<td>FCC 47 CFR part 15 Subpart B, ICES-003 Issue 6:2016</td>
</tr>
<tr>
<td>Life Cycle  </td>
<td colspan="2">8+ years from date of introduction. Includes managed Bill of Materials with advanced notification of change.
</td>
</tr>
</tbody></table>

</div>

+ Add unique tab for product page

Contec 4U Industrial Performance Server

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Product Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>System Description</strong></td>
<td width="60%" colspan="2"><strong>4U </strong></td>
</tr>
<tr>
<td>Processor </td>
<td colspan="2">(2) LGA3647-0 (Socket P) processor sockets.
Compatible with 1 or 2 of any supported CPU. </td>
</tr>
<tr>
<td>Memory  </td>
<td colspan="2">16 total DIMM slots<br>
8 DIMM slots across 6 memory channels per processor<br>
1 DIMM slot per memory channel on 4 channels<br>
2 DIMM slots per memory channel on 2 channels<br>
Supported memory: Registered DDR4 (RDIMM), Load Reduced DDR4
(LRDIMM)<br>
Memory data transfer rate up to 2666 MT/s (processor SKU
dependent)<br>
DDR4 standard voltage of 1.2 V </td>
</tr>
<tr>
<td>Chipset</td>
<td colspan="2">Intel® C624 Chipset </td>
</tr>
<tr>
<td>Local Area Network (LAN)</td>
<td colspan="2">Dual port RJ45 10 GbE on board <br>Optional Dual port RJ45 10 GbE riser   </td>
</tr>
<tr>
<td>Expansion Slots</td>
<td colspan="2">Slot 1: PCIe* 3.0 x8 slot (x8 electrical)
handled by CPU2<br>
Slot 2: PCIe* 3.0 x16 slot (x16 electrical)
handled by CPU2<br>
Slot 3: PCIe* 3.0 x8 slot (x8 electrical)
handled by CPU2<br>
Slot 4: PCIe* 3.0 x16 slot (x16 electrical)
handled by CPU2<br>
Slot 5: PCIe* 3.0 x8 slot (x8 electrical)
handled by CPU1<br>
Slot 6: PCIe* 3.0 x16 slot (x16 electrical)
handled by CPU1
</td>
</tr>
<tr>
<td>Video </td>
<td colspan="2">Integrated 2D video controller <br>
16 MB of DDR4 video memory </td>
</tr>
<tr>
<td>RAID </td>
<td colspan="2">Embedded SATA software RAID<br>
Intel® RSTe 5.0<br>
Intel® Embedded Server RAID Technology 2 1.60 with optional RAID 5
key support</td>
</tr>
<tr>
<td>Server Management </td>
<td colspan="2">Integrated baseboard management controller, IPMI 2.0 compliant<br>
Support for Intel® Server Management software<br>
Dedicated onboard RJ45 management port<br>
Advanced server management via Intel® RMM4 Lite (accessory option)</td>
</tr>
<tr>
<td>Security</td>
<td colspan="2">Password protection <br>
Front panel lockout <br>
Trusted Platform Module (TPM 2.0)<br>
Intel® Trusted Execution Technology (Intel® TXT)</td>
</tr>
<tr>
<td>GPU Support</td>
<td colspan="2">Supports single GPU in both single and dual processor configurations and a dual GPU in dual processor configurations.</td>
</tr>
<tr>
<td>Storage</td>
<td colspan="2">(2) Internal M.2 connectors – SATA / PCIe*
2280 form factor <br>
(10) x SATA 6 Gbps 3.5" (2.5" capable) hotswap HDD /SSD bays, or<br>
(8) x SAS 3.5" (2.5" capable) hot-swap
HDD/SSD bays</td>
</tr>
<tr>
<td> External Connectors</td>
<td colspan="2">(2) Rear Panel USB 2.0 ports<br>
(2) Rear Panel USB 3.0 ports<br>
(1) DB-15 external connector<br>
(1) Front Panel USB 3.0 ports </td>
</tr>
<tr>
<td>Power Supply </td>
<td colspan="2">1200W 1U 1+1 Redundant PSU</td>
</tr>
<tr>
<td>Dimensions </td>
<td colspan="2">24" x 19" x 1.75"</td>
</tr>
<tr>
<td> Operating Temp</td>
<td colspan="2">5 to 40 °C</td>
</tr>
<tr>
<td>Operating Humidity (Max) </td>
<td colspan="2">85% (Non-Condensing)</td>
</tr>
<tr>
<td>Operating Altitude (Max) </td>
<td colspan="2">2,000 Meters</td>
</tr>
<tr>
<td rowspan="5"><b>Regulatory</b> </td>
<td><b>Regulatory</b></td>
<td><b>Standard met for Compliance</b></td>
</tr>
<tr>
<td> EU Directive 2014/35/EU</td>
<td>IEC62368-1</td>
</tr>
<tr>
<td>EU Directive 2004/108/EC </td>
<td>EN55032:2015 + AC:2016-07 Class B, EN55035:2010 + A1:2005, EN61000-3-2:2014,
EN61000-3-3:2013</td>
</tr>
<tr>
<td>North American Safety  </td>
<td>CSA/UL 62368-1 via CSA Mark</td>
</tr>
<tr>
<td>North American EMI </td>
<td>FCC 47 CFR part 15 Subpart B, ICES-003 Issue 6:2016</td>
</tr>
<tr>
<td>Life Cycle  </td>
<td colspan="2">8+ years from date of introduction. Includes managed Bill of Materials with advanced notification of change.
</td>
</tr>
</tbody></table>

</div>

+ Add unique tab for product page

CPS-MG341-ADSC1-931 CONPROSYS M2M Gateway

For unique tab:

<div style="overflow-x:auto;">
<p><strong>General</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>CPU
	</td>
	<td>ARM Cortex-A8 600MHz
	</td>
</tr>
<tr><td>Memory
	</td>
	<td>On Board 512MB DDR3 SDRAM</td>
</tr>
<tr><td>ROM
	</td>
	<td>On-Board 64MB NOR Flash for OS</td>
</tr>
<tr><td>LED
	</td>
	<td>Power (Green)/Status 1 (Green)/Status 2 (Red)</td>
</tr>
<tr><td>Switch
	</td>
	<td>Reset SW, Shut Down SW, Full Duplex/Half Duplex Switching SW</td>
</tr>
<tr><td>RTC
	</td>
	<td>RTC built-in (battery life :10 years or longer at 25°C) lunar inequality ±15sec (at 25°C)</td>
</tr>
<tr><td>Physical dimensions (mm)
	</td>
	<td>188.0(W)×78.0(D)×30.5(H) ( No projection included)</td>
</tr>
<tr><td>Weight
	</td>
	<td>250g</td>
</tr>
<tr><td>Installation method
	</td>
	<td>Quick mounting on the 35mm DIN rail, Mounting on the wall using the screws *8</td>
</tr>
<tr><td>OS
	</td>
	<td>Linux kernel 3.2</td>
</tr>
<tr>
	<td>Operating ambient temperature</td>
	<td>-20 - +60°C *9</td>
</tr>
<tr>
	<td>Operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
	<tr>
	<td>Non-operating ambient temperature</td>
	<td>-20 - +60°C</td>
</tr>
<tr>
	<td>Non-operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
	<tr>
	<td>Floating dust particles</td>
	<td>Not to be excessive</td>
</tr>
<tr>
	<td>Corrosive gases</td>
	<td>None</td>
</tr>
<tr>
	<td>Line-noise resistance</td>
	<td>AC Line/±2kV *10</br> Signal Line /±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
	<td>Static electricity resistance</td>
	<td>Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
	<tr>
	<td>Vibration resistance, Sweep resistance</td>
	<td>10 - 57Hz *11 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr>
	<td>Shock resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)</td>
</tr>
	<tr>
	<td>Grounding</td>
	<td>Class D grounding (previous class 3 grounding), SG-FG/ non-conduction</td>
</tr>
<tr>
	<td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), KC, UL</td>
</tr>
</tbody></table>

<p><strong>LAN</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Transmission standard
	</td>
	<td>10BASE-T/100BASE-TX</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>2 *1</td>
</tr>
<tr><td>Connector
	</td>
	<td>RJ-45 Connector</td>
</tr>
	<tr><td>LED
	</td>
	<td>Speed (Yellow), Link/Act (Green)</td>
</tr>
</tbody></table>

<p><strong>RS-422A/485</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Transmission scheme
	</td>
	<td>Asynchronous serial transmission (Full Duplex/Half Duplex)</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>1</td>
</tr>
<tr><td>Isolation
	</td>
	<td>Bus Isolation/500VDC(when surge protected parts between SG-FG are unimplemented)</td>
</tr>
<tr><td>Baud Rate
	</td>
<td>300bps - 115.2kbps</td>
</tr>
<tr><td>Data length
	</td>
<td>5, 6, 7, 8bit 1, 1.5, 2stopbit</td>
</tr>
<tr><td>Parity check
	</td>
<td>Even, Odd, Non-parity</td>
</tr>
<tr><td>Connector
	</td>
<td>2-piece 3.5mm pitch 5-pin terminal (TX+, TX-, RX+, RX-, SG)</td>
</tr>
<tr><td>Applicable wire
	</td>
<td>AWG28 - 16</td>
</tr>
<tr><td>LED
	</td>
<td>Transmission (Yellow), Reception (Yellow)</td>
</tr>
<tr><td>Switch
	</td>
<td>DIP Switch (Full Duplex /Half Duplex, Terminator (ON/OFF))</td>
</tr>
<tr><td>Surge protection element each signal - SG
	</td>
	<td>Interactive TVS diode</br>
Stand off voltage : ±13V, Peak pulse power : 400W(1msec)</td>
</tr>
<tr><td>Surge protection element SG - FG
	</td>
	<td>Gas discharge tube arrester</br> Discharge voltage : ±300V, impulse current tolerance : 2000A(8/20μsec, 10 times)</td>
</tr>
</tbody></table>

<p><strong>USB</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Transmission standard
	</td>
	<td>USB2.0 standard follow</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>1</td>
</tr>
<tr><td>Connector
	</td>
	<td>TYPE-A</td>
</tr>
</tbody></table>

<p><strong>SD Card Slot</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Standard
	</td>
<td>SD standard follow</td>
</tr>
<tr><td>Connector
	</td>
<td>SD memory card slot</td>
</tr>
<tr><td>LED
	</td>
	<td>Read/Write (Yellow)</td>
</tr>
</tbody></table>

<p><strong>RS/232</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Baud Rate
	</td>
	<td>300bps - 115.2kbps</td>
</tr>
<tr><td>Isolation
	</td>
	<td>Non-isolated</td>
</tr>
<tr><td>Data length
	</td>
	<td>5, 6, 7, 8bit 1, 1.5, 2stopbit</td>
</tr>
<tr><td>Parity check
	</td>
	<td>Even, Odd, Non-parity</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>1</td>
</tr>
<tr><td>Connector
	</td>
	<td>9-pin D-SUB connector (Male)</td>
</tr>
<tr><td>LED
	</td>
	<td>Transmission (Yellow), Reception (Yellow)</td>
</tr>
</tbody></table>

<p><strong>Digital Input, Counter Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Input type
	</td>
	<td>Opto-coupler Isolation Input (Compatible with current sink output and current source output) (negative logic) *2</td>
</tr>
<tr><td>Isolation/Resistance
	</td>
	<td>Bus Isolation /500VDC, Opto-coupler Isolation/1000V</td>
</tr>
<tr><td>Built-in power supply
	</td>
	<td>12VDC (compatible with current sink output) *3</td>
</tr>
<tr><td>Input type
	</td>
	<td>5.6kΩ</td>
</tr>
<tr><td>Input ON current
	</td>
	<td>1.6mA or more</td>
</tr>
<tr><td>Input OFF current
	</td>
	<td>0.16mA or less</td>
</tr>
<tr><td>Response time
	</td>
	<td>Within 200μsec *4</td>
</tr>
<tr>
	<td>Interrupt (Digital input)</td>
	<td>4 interrupt input signals are arranged into a single output of interrupt signal. An interrupt is generated at the falling edge (HIGH-to-LOW transition) or rising edge (LOW-to-HIGH transition). (setting can be done by software)</td>
</tr>
<tr>
	<td>The number of channels</td>
	<td>4 (It is possible to allocate 2channels to counter input)</td>
</tr>
<tr>
	<td>Count type</td>
	<td>Up count</td>
</tr>
<tr>
	<td>Max. count</td>
	<td>FFFFFFH (binary data)</td>
</tr>
<tr>
	<td>Counter response speed</td>
	<td>1kHz (Max.), Duty: 50% (Max.)</td>
</tr>
<tr>
	<td>Interrupt (Counter input)</td>
	<td>One interrupt caused upon channel count match</td>
</tr>
<tr>
	<td>Timer</td>
	<td>None</td>
</tr>
<tr>
	<td>LED</td>
	<td>DI0 - DI3 (Yellow)</td>
</tr>
<tr>
	<td>Surge protection element each signal to B_COM</td>
	<td>Interactive TVS diode Stand off voltage : ±30V, Peak pulse power : 400W(1msec)</td>
</tr>
</tbody></table>

<p><strong>Digital Output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
	<td>Output type</td>
	<td>Semiconductor relay output</td>
</tr>
<tr>
	<td>Isolation/Resistance</td>
	<td>Semiconductor relay isolation/1000V</td>
</tr>
<tr><td>Maximum output voltage / current
	</td>
	<td>26.4VAC/VDC/100mA</td>
</tr>
<tr><td>Response time
	</td>
	<td>Within 2msec</td>
</tr>
<tr><td>ON resistance
	</td>
	<td>8Ω or less (at 25℃)</td>
</tr>
<tr><td>OFF leakage current
	</td>
	<td>4μA or less (at 25℃)</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>2</td>
</tr>
<tr><td>LED
	</td>
	<td>DO0 - DO1 (Yellow)</td>
</tr>
<tr><td>Surge protection element + to -
	</td>
	<td>Interactive TVS diode, Stand off voltage : ±30V, Peak pulse power : 400W(1msec)</td>
</tr>
</tbody></table>

<p><strong>Digital Input/ Counter Input/ Digital Output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
	<td>Connector</td>
	<td>2-piece 3.5mm pitch 10-pin terminal (DI_ACOM, DI0, DI1, DI2, DI3, DI_BCOM, DO0+, DO0-, DO1+, DO1-)</td>
</tr>
<tr>
	<td>Applicable wire</td>
	<td>AWG28 - 16</td>
</tr>
</tbody></table>

<p><strong>Analog Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
	<td>Input type</td>
	<td>Current Input</td>
</tr>
<tr>
	<td>Input range</td>
	<td>0 - 20mA</td>
</tr>
<tr>
	<td>Maximum input rating</td>
	<td>30mA</td>
</tr>
<tr>
	<td>Input impedance</td>
	<td>250Ω</td>
</tr>
<tr>
	<td>The number of channels</td>
	<td>Differential Input 2ch</td>
</tr>
<tr>
	<td>Channel switching rate</td>
	<td>3msec/ch (Max.) *5</td>
</tr>
<tr>
	<td>Conversion rate</td>
	<td>The sampling interval differs by the software programmed by the user.</td>
</tr>
<tr>
	<td>Data buffer</td>
	<td>None</td>
</tr>
<tr>
	<td>Resolution</td>
	<td>12bit</td>
</tr>
<tr>
	<td>Non-Linearity error *6</td>
	<td>±10LSB</td>
</tr>
<tr>
	<td>Isolation/Resistance</td>
	<td>Bus Isolation /500VDC, Inter Channel Isolation /200V</td>
</tr>
<tr>
	<td>Connector</td>
	<td>2-piece 3.5mm pitch 3-pin terminal (AI+, AI-, SG)</td>
</tr>
<tr>
	<td>Applicable wire</td>
	<td>AWG28 - 16</td>
</tr>
<tr>
	<td>LED</td>
	<td>AI0 - AI1 (Yellow)</td>
</tr>
</tbody></table>

<p><strong>Power Supply*7</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
	<td>Rated input voltage</td>
	<td>12 - 24VDC</td>
</tr>
<tr>
	<td>Input voltage range</td>
	<td>10.8 - 30VDC</td>
</tr>
<tr>
	<td>Power consumption</td>
	<td>12V 0.7 A (Max.), 24V 0.4A (Max.)</td>
</tr>
<tr>
	<td>Connector</td>
	<td>2-piece 3.5mm pitch 3-pin terminal (V+, V-, FG)</td>
</tr>
<tr>
	<td>Applicable wire</td>
	<td>AWG24 - 16</td>
</tr>
<tr>
	<td>Surge protection element V+ - V-, V- - FG</td>
	<td>Interactive TVS diode, Stand off voltage : ±30V, Peak pulse power : 400W(1msec)</td>
</tr>
</tbody></table>

<p>Notes: </p>
<p>*1 The LAN ports of the CPS-MG341-ADSC1-931 are independent, which makes it possible to split the network segment.</p>
<p>*2 Data 0 corresponds to High level and Data 1 corresponds to Low level.</p>
<p>*3 The default setting is for an external circuit power supply. With a software command, it can be switched to the built-in power use.</p>
<p>*4 Response time of Opto-coupler.</p>
<p>*5 Switching time of Inter Channel.</p>
<p>*6 The non-linearity error means an error of approximately 0.07% occurs over the maximum range at -20 °C and +60 °C ambient temperature.</p>
<p>*7 Use power cable within 3meters.</p>
<p>*8 Commercial screws are required (fit into φ3.5 hole).</p>
<p>*9 If you use the USB with bus power, operate the product at between -20 and +55°C.</p>
<p>*10 When you use the CPS-PWD15AW12-01 (optional product).</p>
<p>*11 When you use an optional power product: 10-55Hz (See the manual of optional power product for details).</p>
</div>

+ Add unique tab for product page

CPSL-08P1EN Multi-Protocol, IP67 8-Channel IO-Link Master

For unique tab:

<figure>
<table style="width: 50%; border-collapse: collapse; border-style: hidden;" border="0">
<tbody>
<tr>
<td style="width: 49.8224%;">
<p style="text-align: center;"><a title="IO-Link Master Datasheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/ds_cpsl-08p1en_en_6.pdf?v=1610556860" target="_blank" rel="noopener"><img src="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/io-link-datasheet-thumb.jpg?v=1587060783" alt="IO-Link Master Datasheet Thumbnail Image" width="116" height="147" border="1" /></a></p>
<p style="text-align: center;"><a title="IO-Link Master Datasheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/ds_cpsl-08p1en_en_6.pdf?v=1610556860" target="_blank" rel="noopener">IO-Link Master Datasheet</a></p>
</td>
<td style="width: 50.1776%;">
<p><a title="IO-Link Master Brochure" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/cpsl-08p1en_low_sec_1.pdf?v=1610556860" target="_blank" rel="noopener"><img style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/IO-Link-Brochure-Thumb.jpg?v=1602870448" alt="IO-Link Master Brochure Thumbnail Image" width="116" height="147" border="1" /></a></p>
<p style="text-align: center;"><a title="IO-Link Master Brochure" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/cpsl-08p1en_low_sec_1.pdf?v=1610556860" target="_blank" rel="noopener">IO-Link Master Brochure</a></p>
</td>
</tr>
</tbody>
</table>
<figcaption></figcaption>
</figure>
<figure></figure>

For unique tab:

<div style="overflow-x:auto;"><table class="spec">
<p><strong>Function Specifications</strong></p>
<p><span style="text-decoration: underline;"><span style="color: #0000ff;"><a style="color: #0000ff; text-decoration: underline;" title="IO-Link Master Datasheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/ds_cpsl-08p1en_en.pdf?v=1587060580" target="_blank" rel="noopener">Click here to download a detailed datasheet.</a></span></span></p>
<p> </p>
<table class="spec">
<tbody>
<tr>
<td colspan="2" width="88"><strong>LAN </strong></td>
</tr>
<tr>
<td width="88">Transmission standard</td>
<td width="221">100BASE-TX</td>
</tr>
<tr>
<td width="88">Data rate</td>
<td width="221">10/100Mbps</td>
</tr>
<tr>
<td width="88">The number of ports</td>
<td>2</td>
</tr>
<tr>
<td width="88">Connector</td>
<td width="221">M12(D-coded, Female, 4-pin)</td>
</tr>
<tr>
<td width="88">LED</td>
<td width="221">ACT(Orange), LINK(Green)</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>IO-Link </strong></td>
</tr>
<tr>
<td width="88">Transmission scheme</td>
<td width="221">IO-Link protocol (Ver.1.0/Ver.1.1)</td>
</tr>
<tr>
<td width="88">The number of ports</td>
<td>8</td>
</tr>
<tr>
<td width="88">Connector</td>
<td width="221">M12(A-coded, Female, 5-pin)*1</td>
</tr>
<tr>
<td width="88">Communication speed</td>
<td width="221">COM1: 4.8kbp, COM2: 38.4kbps, COM3: 230.4kbps</td>
</tr>
<tr>
<td width="88">Port class</td>
<td width="221">Type A</td>
</tr>
<tr>
<td width="88">Rated voltage</td>
<td width="221">24VDC (typ.)</td>
</tr>
<tr>
<td width="88">Max. load current</td>
<td width="221">200mA/port *2</td>
</tr>
<tr>
<td width="88">Isolation specification</td>
<td width="221">Non-isolated</td>
</tr>
<tr>
<td width="88">LED</td>
<td width="221">A(Orange),ST(Green/Red), B(Orange)</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>IO-Link (in SIO(DI)mode) </strong></td>
</tr>
<tr>
<td width="88">Input type</td>
<td width="221">Current source output (PNP output ) support</td>
</tr>
<tr>
<td width="88">Rated voltage</td>
<td width="221">24VDC (typ.)</td>
</tr>
<tr>
<td width="88">Input current</td>
<td width="221">5mA (typ.)</td>
</tr>
<tr>
<td width="88">ON/OFF voltage</td>
<td width="221">15VDC min. / 5VDC max. *3</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>IO-Link</strong><br /><strong> (in SIO(DI) mode)</strong></td>
</tr>
<tr>
<td width="88">Output type</td>
<td width="221">Push-pull output *3</td>
</tr>
<tr>
<td width="88">Rated voltage</td>
<td width="221">24VDC (typ.)</td>
</tr>
<tr>
<td width="88">Output current</td>
<td width="221">200mA/port *2</td>
</tr>
<tr>
<td width="88">Output registance</td>
<td width="221">3Ω  max.</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>IO-Link</strong><br /><strong> (Digital inputs for pin 2)</strong></td>
</tr>
<tr>
<td width="88">Input type</td>
<td width="221">Current source output (PNP output ) support</td>
</tr>
<tr>
<td width="88">Rated voltage</td>
<td width="221">24VDC (typ.)</td>
</tr>
<tr>
<td width="88">Input current</td>
<td width="221">2mA (typ.)</td>
</tr>
<tr>
<td width="88">ON/OFF voltage</td>
<td width="221">15VDC min. / 5VDC max. *3</td>
</tr>
<tr>
<td width="173">LED</td>
<td width="221">ST(Green/Red)、BF/NS/ERR(Green/Red)、 SF/MS/RUN(Green/Red)、<br /> SYS(Green, Orange)</td>
</tr>
<tr>
<td width="173">Switch</td>
<td width="221">Mode setting switch, Address setting selection switch, Address setting switch×2, Protocol setting switch</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>Power input *4*5 </strong></td>
</tr>
<tr>
<td width="88">Rate input voltage (current)</td>
<td width="221"><sup>U</sup>S  <sup>: 24VDC (1.8A), U</sup>A <sup>: 24VDC (0.1A)</sup></td>
</tr>
<tr>
<td width="88">Max. input current</td>
<td width="221"><sup>U</sup>S  <sup>: 12A, U</sup>A <sup>: 12A</sup></td>
</tr>
<tr>
<td width="88">Input voltage range</td>
<td width="221"><sup>U</sup>S  <sup>: 20.4  </sup><sup>–  </sup><sup>26.4VDC, U</sup>A <sup>: 20.4  </sup><sup>–  </sup><sup>26.4VDC</sup></td>
</tr>
<tr>
<td width="88">Device current comsumption</td>
<td width="221"><sup>U</sup>S  <sup>: 0.2A(Max.), U</sup>A <sup>: 0.1A(Max.)</sup></td>
</tr>
<tr>
<td width="88">Connector</td>
<td width="221">M12(L-coded, Male, 5(4+FE)pin)</td>
</tr>
<tr>
<td colspan="2" width="88"><strong>Power output *4</strong></td>
</tr>
<tr>
<td width="88">Output voltage *6</td>
<td width="221"><sup>U</sup>S  <sup>: US input voltage (Max.), U</sup>A <sup>: UA input voltage (Max.)</sup></td>
</tr>
<tr>
<td width="88">Max. output current *7</td>
<td width="221"><sup>U</sup>S  <sup>: 12A, U</sup>A <sup>: 12A</sup></td>
</tr>
<tr>
<td width="88">Connector</td>
<td width="221">M12(L-coded, female, 5(4+FE)pin)</td>
</tr>
<tr>
<td width="173">Physical dimensions (mm)</td>
<td width="221">69.0(W)×225.0(D)×18.0(H)<br /> (No projection included)</td>
</tr>
<tr>
<td width="173">Weight</td>
<td width="221">600g</td>
</tr>
<tr>
<td width="173">Protective function</td>
<td width="221">IP67 *8</td>
</tr>
<tr>
<td width="173">Installation method</td>
<td width="221">Installation with screws *9</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CPSN-AI Analog Input Module for CONPROSYS Nano Series

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Function Specifications </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Item</strong></td>
<td width="40%" align="center"><strong>CPSN-AI-1208LI  </strong></td>
<td width="40%" align="center"><strong>CPSN-AI-2408LI  </strong></td>
</tr>
<tr>
<td>Input type *1 </td>
<td colspan="2">Single-Ended Input or Differential Input (Set by software command)</td>
</tr>
<tr>
<td>Input range *1</td>
<td>±10V, ±5V, ±2.5V, 0 -+10V (Set by software command)<br> ±20mA (Switch setting)</td>
<td>±10V, ±5V, ±2.5V, 0 -+10V, 0 -+5V (Set by software command)<br> ±20mA, 0 -+20mA (Switch setting)</td>
</tr>
<tr>
<td>Maximum input rating</td>
<td>At voltage input : ±15V<br> At current input : ±24mA</td>
<td>At voltage input : ±20V <br>At current input : ±24mA</td>
</tr>
<tr>
<td>Input impedance</td>
<td>At voltage input : 1MΩ or more (Power ON), 10kΩ(Power OFF)<br> At current input : 249Ω</td>
<td>At voltage input : 1MΩ or more <br>At current input : 249Ω</td>
</tr>
<tr>
	<td>Input channel</td>
	<td colspan="2">8ch (Single-Ended Input), 4ch (Differential Input) * Current input is supported for differential input only. </td>
</tr>
<tr>
	<td>Resolution </td>
	<td>12-bit</td>
	<td>24-bit</td>
</tr>
<tr>
	<td>Non-Linearity error *2</td>
	<td>At voltage input : ±10LSB <br>At current input : ±20LSB</td>
	<td>At voltage input : 0.1%FS <br>At current input : 0.2%FS (when 40msec/ch)</td>
</tr>
<tr>
	<td>Channel switching rate </td>
	<td>10μsec/ch</td>
	<td>208usec/ch - 319msec/ch</td>
</tr>
<tr>
	<td>Conversion rate</td>
	<td colspan="2">Differ by the software</td>
</tr>
<tr>
	<td>Buffer memory</td>
	<td colspan="2">-</td>
</tr>
<tr>
	<td>Conversion start trigger</td>
	<td>Software</td>
	<td>Constant conversion</td>
</tr>
<tr>
	<td>Digital filter</td>
	<td>-</td>
	<td>Power supply noise(50/60Hz) removal <br> High-frequency noise removal</td>
</tr>
<tr>
	<td>Isolation</td>
	<td colspan="2">Bus Isolation</td>
</tr>
<tr>
	<td>Voltage resistance</td>
	<td colspan="2">500VDC</td>
</tr>
<tr>
	<td>Connector</td>
	<td colspan="2">2 pieces 3.81mm pitch 10-pin terminal</td>
</tr>
<tr>
	<td>Applicable wire</td>
	<td colspan="2">AWG28 - 16</td>
</tr>
<tr>
	<td>LED</td>
	<td>-</td>
	<td>AI0 -AI7 (Green)</td>
</tr>
<tr>
	<td>Electricity consumption</td>
	<td>5V 0.21A (Max.) <br> 3.3V 0.01A (Max.)</td>
	<td>5V 0.14A (Max.) <br> 3.3V 0.06A (Max.)</td>
</tr>
<tr>
	<td>Physical dimensions (mm)</td>
	<td colspan="2">15.6(W)×52.6(D)×84(H) (No projection included)</td>
</tr>
<tr>
	<td>Weight</td>
	<td colspan="2" >50g</td>
</tr>

</tbody></table>

<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Item </strong></td>
<td width="60%"><strong>Description </strong></td>
</tr>
<tr>
<td>Operating ambient temperature</td>
<td>-20 -+60°C (Wall installation at an angle of 0°) *1 </td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Non-operating ambient temperature</td>
<td>-20 -+60°C</td>
</tr>
<tr>
<td>Non-operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
	<td>Sweep resistance</td>
	<td>10 - 57Hz *2 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr>
	<td>Shock resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)</td>
</tr>
<tr>
	<td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
	<td>Notes:</td>
	<td><p>*1 -20°C to +50°C with a vertical installation at an angle of 90° to the left/right, -20°C to +55°C for the horizontal installation. </p>
	  <p>*2 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the User’s Guide of the optional power supply).</p></td>
</tr>
</tbody>
</table>
</div>

+ Add unique tab for product page

CPSN-COM-1PD CONPROSYS nano Series Serial I/O Module RS-422A/485

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Function specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of channels</td>
<td>1ch</td>
</tr>
<tr>
<td>Transmission scheme</td>
<td>Asynchronous Serial Transmission (Full Duplex/Half Duplex)</td>
</tr>
<tr>
<td>Interface type</td>
<td>RS-422A/485</td>
</tr>
<tr>
<td>Isolation </td>
<td>Bus Isolation</td>
</tr>
<tr>
<td>Voltage Resistance </td>
<td>500VAC</td>
</tr>
<tr>
<td>Baud Rate</td>
<td rowspan="2">The setting range differs by the software program.<br> See the reference manual (Software) for details.*1*2 *3</td>
</tr>
<tr>
<td>Data length</td>
</tr>
<tr>
<td>Parity check</td>
<td>Even, Odd, Non-parity *1</td>
</tr>
<tr>
<td>Buffers</td>
<td>It has 64-byte receive and 64-byte transmit FIFO buffers.</td>
</tr>
<tr>
<td>Connector</td>
<td>2-piece 3.81mm pitch10-pin terminal</td>
</tr>
<tr>
<td>Applicable wire</td>
<td>AWG28 - 16</td>
</tr>
<tr>
<td>Switch</td>
<td>6-pole switch(Full Duplex / Half Duplex), 4-pole switch(Terminator (ON/OFF))</td>
</tr>
<tr>
<td>Surge protection element each signal - SG</td>
<td>Interactive TVS Diode Stand off voltage : ±13V, Peak pulse power : 400W(1ms)</td>
</tr>
<tr>
<td>Surge protection element SG -FG</td>
<td>Gas discharge tube arrester <br>Discharge voltage : ±300V, Impulse current tolerance : 2000A(8/20us, 10 times)</td>
</tr>
<tr>
<td>LED </td>
<td>Transmission (Green), Reception (Green)</td>
</tr>
<tr>
<td>Electricity consumption</td>
<td>5V 250mA (Max.) <br>3.3V 20mA (Max.) </td>
</tr>
<tr>
<td>Physical dimensions (mm) </td>
<td>15.6(W)×52.6(D)×84(H) (Not include projection) </td>
</tr>
<tr>
<td>Weight </td>
<td>50g</td>
</tr>
</tbody></table>
	
<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Item </strong></td>
<td width="60%"><strong>CPSN-COM-1PD </strong></td>
</tr>
<tr>
<td>Operating ambient temperature </td>
<td>-20 -+60°C (Wall installation)<br> -20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
</tr>
<tr>
<td>Operating ambient humidity </td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Non-operating ambient temperature</td>
<td>-20 -+60°C</td>
</tr>
<tr>
<td>Non-operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
	<td>Signal Line/±1kV (IEC61000-4-4 Level 3,EN61000-4-4 Level 3) </td>
</tr>
<tr>
<td>Static electricity resistance </td>
<td>Touch/±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) <br>Air/±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
<td>Sweep resistance </td>
<td>10 - 57Hz*4/ semi-amplitude Vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr>
<td>Shock resistance</td>
<td>15G half-sine shock for 11ms in X, Y, and Z directions JIS C60068-2- 27-compliant, IEC60068-2-27-compliant) </td>
</tr>
<tr>
<td>Standard</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
<td>Notes:</td>
<td>With the optional DIN rail fitting power supply: 10-55Hz (for details, see the user’s guide of the optional power supply)</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CPSN-DI-08 CONPROSYS Nano Series Digital Input Module

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DI-08L</strong></td>
<td width="40%"><strong>CPSN-DI-08BL</strong></td>
</tr>
<tr><td>Input type</td>
	<td>Opto-coupler isolated input (supports current sink [negative logic] output*1/current source [positive logic] output*2)</td>
	<td>Opto-coupler isolated input (supports current sink [negative logic] output *1)</td>
</tr>
<tr><td>Isolation</td>
	<td>Opto-coupler Isolation</td>
	<td>Opto-coupler Isolation</td>
</tr>
<tr><td>Voltage Resistance</td>
	<td>AC1000Vrms</td>
	<td>AC500Vrms</td>
</tr>
<tr><td>Input Resistance</td>
	<td>4.7kΩ</td>
	<td>4.7kΩ</td>
</tr>
<tr><td>Input ON current</td>
<td>2.0mA or more</td>
	<td>2.0mA or more</td>
</tr>
<tr><td>Input OFF current</td>
<td>0.16mA or less</td>
	<td>0.16mA or less</td>
</tr>
<tr><td>Interrupt</td>
<td>8 interrupt input signals are arranged into a single output of
interrupt signal. <br>
An interrupt is generated at the rising edge (HIGH-to-LOW transition)<br>
or falling edge (LOW-to-HIGH transition). (setting can be done by
software)</td>
<td>8 interrupt input signals are arranged into a single output of
interrupt signal. <br>
An interrupt is generated at the rising edge (HIGH-to-LOW transition)<br>
or falling edge (LOW-to-HIGH transition). (setting can be done by
software)</td>
<tr><td>Response time</td>
<td>Within 200μsec</td>
	<td>Within 200μsec</td>
</tr>
<tr><td>Number of input signal channels</td>
<td>8 (shared common)</td>
	<td>8 (shared common)</td>
</tr>
<tr><td>LED</td>
<td>DI0 - DI7 (Green)</td>
<td>DI0 - DI7 (Green)</td>
</tr>
</tbody></table>

<p><strong>Common</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DI-08L</strong></td>
<td width="40%"><strong>CPSN-DI-08BL</strong></td>
</tr>
<tr>
	<td>Connector</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
</tr>
<tr><td>Applicable</td>
	<td>AWG28 - 16</td>
	<td>AWG28 - 16</td>
</tr>
<tr><td>External circuit power supply</td>
	<td>12 - 24VDC (±10%)</td>
	<td>12VDC 32mA (Max.)</td>
</tr>
<tr><td>Electricity consumption</td>
	<td>-<br>3.3V 0.05A (Max.)</td>
	<td>5V 0.11A (Max.)<br>
3.3V 0.05A (Max.)</td>
</tr>
<tr><td>Allowable distance of signal extension</td>
	<td>Approx. 50m (depending on wiring environment)</td>
	<td>Approx. 50m (depending on wiring environment)</td>
</tr>
<tr><td>Physical dimensions (mm)</td>
	<td>15.6 (W) x 52.6(D) x 84(H) (not include projection)</td>
	<td>15.6 (W) x 52.6(D) x 84(H) (not include projection)</td>
</tr>
<tr><td>Weight</td>
	<td>50g</td>
	<td>50g</td>
</tr>
</tbody></table>

<p>*1 Data “0” and “1”correspond to the High and Low levels, respectively.</p>
<p>*2 Data “0” and “1” correspond to the Low and High levels, respectively.</p>
</div>

+ Add unique tab for product page

CPSN-DI-16BCL Digital Input CONPROSYS Nano I/O Module 16ch

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Input type</td>
<td>Opto-coupler isolated input (supports current sink [negative logic] output
*1/current source [positive logic] output *2)</td>
</tr>
<tr>
<td>Isolation</td>
<td>Opto-coupler Isolation</td>
</tr>
<tr>
<td>Voltage Resistance</td>
<td>500VACrms</td>
</tr>
<tr>
<td>Input Resistance</td>
<td>8.2kΩ</td>
</tr>
<tr>
	<td>Input ON current</td>
	<td>1.0mA or more</td>
</tr>
<tr>
	<td>Input OFF current</td>
	<td>0.16mA or less</td>
</tr>
<tr>
	<td>Interrupt</td>
	<td>16 interrupt input signals are arranged into a single output of interrupt signal.
An interrupt is generated at the falling edge (HIGH-to-LOW transition)
and the rising edge (LOW-to-HIGH transition) or at both of the edges. (setting
can be done by software)</td>
</tr>
<tr>
	<td>Software filter (LPF)</td>
	<td>1msec – 1000msec *3</td>
</tr>
<tr>
	<td>Response time</td>
	<td>Within 200μsec</td>
</tr>
<tr>
	<td>Number of input signal channels</td>
	<td>16 (shared common)</td>
</tr>
<tr>
	<td>LED</td>
	<td>DI00 – DI07 (Green), DI10 – DI17 (Green)</td>
</tr>
</tbody></table>

<p><strong>Common</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Connector</td>
<td>MIL connector 20-pin (2.54mm pitch 10 x 2 lines)</td>
</tr>
<tr>
<td>Applicable wire</td>
<td>Flat cable with MIL connector</td>
</tr>
<tr>
<td>External circuit power supply</td>
<td>12 - 24VDC (±10%)</td>
</tr>
<tr>
<td>Internal circuit power supply</td>
<td>12VDC, 62 mA can be output from the total of all inputs as an external output current</td>
</tr>
<tr>
<td>Electricity consumption</td>
<td>5V 0.15A (Max.), 3.3V 0.10A (Max.)</td>
</tr>
<tr>
<td>Allowable distance of signal extension</td>
<td>Approx. 50m (depending on wiring environment)</td>
</tr>
<tr>
<td>Physical dimensions (mm)</td>
<td>15.6 (W) x 52.6(D) x 84(H) (not include projection)</td>
</tr>
<tr>
<td>Weight</td>
<td>50g</td>
</tr>
<tr>
	<td>Notes:</td>
	<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively.<br>
*2 Data “0” and “1” correspond to the Low and High levels, respectively.<br>
*3 To meet the specified CE EMC Directive, set the digital filter one meter or longer.</td>
</tr>

</tbody></table>

<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Operating ambient temperature *1</td>
<td>-20 - +60°C (Vertical installation)<br>
-20°C to +55°C with a vertical installation at an angle of 90° to the
left/right or with a horizontal installation</td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Non-operating ambient temperature</td>
<td>-20 - +60°C</td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not extreme</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
	<td>Sweep resistance</td>
	<td>10 - 57Hz *2 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant,
IEC60068-2-6-compliant)</td>
</tr>
<tr>
	<td>Shock resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 –compliant, IEC 60068-2-27 -compliant)</td>
</tr>
<tr>
	<td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
	<td>Notes:</td>
	<td>*1 Derating by way of the output current is necessary. (Refer to "Derating" of reference manual
for details.)<br>
*2 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the user’s guide of
the optional power supply).</td>
</tr>
</tbody>
</table>
</div>

+ Add unique tab for product page

CPSN-DO-08 CONPROSYS Nano Series Digital Output Module

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08L</strong></td>
<td width="40%"><strong>CPSN-DO-08BL</strong></td>
</tr>
<tr><td>Output type </td>
	<td>Opto-coupler Isolation Open Collector Output (Current
sink type) (negative logic) *1 </td>
	<td>Opto-coupler Isolation Open Collector Output (Current
sink type) (negative logic) *1 </td>
</tr>
<tr><td>Isolation</td>
	<td>Opto-coupler Isolation</td>
	<td>Opto-coupler Isolation</td>
</tr>
<tr><td>Voltage Resistance</td>
	<td>AC1000Vrms</td>
	<td>AC500Vrms</td>
</tr>
<tr><td>Output Voltage</td>
	<td>35VDC (Max.)</td>
	<td>35VDC (Max.)</td>
</tr>
<tr><td>Output Current</td>
<td>500mA (Max.)</td>
	<td>500mA (Max.)</td>
</tr>
<tr><td>Residual Voltage with Output ON </td>
<td>0.5V or less (Output current ≤ 50mA)</td>
	<td>0.5V or less (Output current ≤ 50mA)</td>
</tr>
<tr><td>Response time </td>
<td>Within 200μsec</td>
<td>Within 200μsec</td>
<tr><td>Number of output signal channels</td>
<td>8 (shared common) </td>
	<td>8 (shared common) </td>
</tr>
<tr><td>LED</td>
<td>DO0 - DO7 (Green)</td>
<td>DO0 - DO7 (Green)</td>
</tr>
</tbody></table>

<p><strong>Common</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08L</strong></td>
<td width="40%"><strong>CPSN-DO-08BL</strong></td>
</tr>
<tr>
	<td>Connector</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
</tr>
<tr><td>Applicable</td>
	<td>AWG28 - 16</td>
	<td>AWG28 - 16</td>
</tr>
<tr><td>External circuit power supply</td>
	<td>12 - 24VDC (±10%)</td>
	<td>12 - 24VDC (±10%)</td>
</tr>
<tr><td>Electricity consumption</td>
	<td>-<br>3.3V 0.09A (Max.)</td>
	<td>5V 0.13A (Max.)<br>
3.3V 0.09A (Max.)</td>
</tr>
<tr><td>Physical dimensions (mm)</td>
	<td>25.6 (W) x 52.6(D) x 84(H) (Not include projection) </td>
	<td>25.6 (W) x 52.6(D) x 84(H) (Not include projection) </td>
</tr>
<tr><td>Weight</td>
	<td>50g</td>
	<td>50g</td>
</tr>
</tbody></table>
	
<p><strong>Environment</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08L</strong></td>
<td width="40%"><strong>CPSN-DO-08BL</strong></td>
</tr>
<tr>
	<td>Operating ambient temperature *3</td>
	<td>-20 - +60°C (Wall installation at an angle of 0°)<br>
-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
	<td>-20 - +60°C (Wall installation at an angle of 0°)<br>
-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
</tr>
<tr><td>Operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
<tr><td>Non-operating ambient temperature</td>
	<td>-20 - +60°C</td>
	<td>-20 - +60°C</td>
</tr>
<tr><td>Non-operating ambient humidity</td>
	<td>10 - 90%RH (No condensation) </td>
	<td>10 - 90%RH (No condensation) </td>
</tr>
<tr><td>Floating dust particles</td>
	<td>Not to be excessive</td>
	<td>Not to be excessive</td>
</tr>
<tr><td>Corrosive gases</td>
	<td>None</td>
	<td>None</td>
</tr>
<tr><td>Line noise</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr><td>Static electricity resistance</td>
	<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) </td>
	<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3) </td>
</tr>
<tr><td>Sweep resistance</td>
	<td>10 - 57Hz *4/ semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G, 40 minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
	<td>10 - 57Hz *4/ semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G, 40 minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr><td>Impact resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C60068-2-27-compliant, IEC60068-2-27-compliant</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C60068-2-27-compliant, IEC60068-2-27-compliant</td>
</tr>
<tr><td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
</tbody></table>

<p>*1 Data “0” and “1” correspond to the Low and High levels, respectively.</p>
<p>*2 The digital output circuit is equipped with a fuse for preventing overcurrent. Use a power
supply that has overcurrent protection or a 300 W or higher power supply. </p>
</p>
<p>*3 Output current derating is required.</p>
<p>*4 With the optional DIN rail fitting power supply : 10-55Hz (for details, see the specification of
the optional power supply)</p>
</div>

+ Add unique tab for product page

CPSN-DO-08RL Digital Output CONPROSYS Nano I/O Module 8ch

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08RL</strong></td>
<td width="40%"><strong>CPSN-DO-08BRL</strong></td>
</tr>
<tr><td>Output type</td>
	<td>Opto-coupler Isolation Output (Current source type) (positive
logic) *1</td>
	<td>Opto-coupler Isolation Output (Current source type) (positive
logic) *1</td>
</tr>
<tr><td>Isolation</td>
	<td>Opto-coupler Isolation</td>
	<td>Opto-coupler Isolation</td>
</tr>
<tr><td>Voltage Resistance</td>
	<td>AC1000Vrms</td>
	<td>AC500Vrms</td>
</tr>
<tr><td>Output Voltage</td>
	<td>12 - 24VDC(±10%)</td>
	<td>12VDC</td>
</tr>
<tr><td>Output Current</td>
<td>500mA (Max.)</td>
	<td>56mA (Max.) (The total value of all output channels)</td>
</tr>
<tr><td>Maximum voltage drop at ON</td>
<td>0.5V or less</td>
	<td>0.5V or less</td>
</tr>
<tr>
	<td>Response time </td>
<td>Within 200μsec</td>
<td>Within 200μsec</td>
	</tr>
<tr>
	<td>Number of output signal channels</td>
<td>8 (shared common) </td>
	<td>8 (shared common) </td>
</tr>
<tr>
	<td>LED</td>
<td>DO0 - DO7 (Green)</td>
<td>DO0 - DO7 (Green)</td>
</tr>
</tbody></table>

<p><strong>Common</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08RL</strong></td>
<td width="40%"><strong>CPSN-DO-08BRL</strong></td>
</tr>
<tr>
	<td>Connector</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
	<td>2 pieces 3.81mm pitch 10-pin terminal</td>
</tr>
<tr><td>Applicable wire</td>
	<td>AWG28 - 16</td>
	<td>AWG28 - 16</td>
</tr>
<tr>
	<td>External circuit power supply*2</td>
	<td>12 - 24VDC (±10%)</td>
	<td>-</td>
</tr>
<tr>
	<td>Internal circuit power supply</td>
	<td>-</td>
	<td>12VDC</td>
</tr>
<tr><td>Electricity consumption</td>
	<td>-<br>3.3V 0.08A (Max.)</td>
	<td>5V 0.15A (Max.) *3<br>
3.3V 0.08A (Max.)</td>
</tr>
<tr><td>Physical dimensions (mm)</td>
	<td>15.6(W)×52.6(D)×84(H) (No projection included)</td>
	<td>15.6(W)×52.6(D)×84(H) (No projection included)</td>
</tr>
<tr><td>Weight</td>
	<td>50g</td>
	<td>50g</td>
</tr>
</tbody></table>
	
<p><strong>Environment</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="20%"><strong>Model</strong></td>
<td width="40%"><strong>CPSN-DO-08RL</strong></td>
<td width="40%"><strong>CPSN-DO-08BRL</strong></td>
</tr>
<tr>
	<td>Operating ambient temperature *3</td>
	<td>-20 - +60°C (Wall installation at an angle of 0°)<br>
-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
	<td>-20 - +60°C (Wall installation at an angle of 0°)<br>
-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
</tr>
<tr><td>Operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
<tr><td>Non-operating ambient temperature</td>
	<td>-20 - +60°C</td>
	<td>-20 - +60°C</td>
</tr>
<tr><td>Non-operating ambient humidity</td>
	<td>10 - 90%RH (No condensation) </td>
	<td>10 - 90%RH (No condensation) </td>
</tr>
<tr><td>Floating dust particles</td>
	<td>Not to be excessive</td>
	<td>Not to be excessive</td>
</tr>
<tr><td>Corrosive gases</td>
	<td>None</td>
	<td>None</td>
</tr>
<tr><td>Line noise</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr><td>Static electricity resistance</td>
	<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
	<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br>
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr><td>Sweep resistance</td>
	<td>10 - 57Hz *5 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
	<td>10 - 57Hz *5 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr><td>Shock resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)</td>
</tr>
<tr><td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
</tbody></table>

<p>*1 Data “0” and “1” correspond to the Low and High levels, respectively.</p>
<p>*2 The digital output circuit is equipped with a fuse for preventing overcurrent. Use a power
supply that has overcurrent protection or a 300 W or lower power supply.</p>
<p>*3 Output current 56mA is included.</p>
<p>*4 Output current derating is required.</p>
<p>*5 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the user’s guide of
the optional power supply).</p>
</div>

+ Add unique tab for product page

CPSN-MCB271-1-041 CONPROSYS Nano Remote I/O - Communication Coupler

For unique tab:

<div style="overflow-x:auto;">
<p><strong>General</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>CPU
	</td>
	<td>ARM Cortex-M3 180MHz
	</td>
</tr>
<tr><td>Memory
	</td>
	<td>On Board 16MB SDRAM</td>
</tr>
<tr><td>ROM
	</td>
	<td>On-Board 4MB NOR Flash for OS</td>
</tr>
<tr><td>FeRAM
	</td>
	<td>On-Board 32kB</td>
</tr>
<tr><td>LED
	</td>
	<td>PWR(Green) / RUN(Green) / STS(Green) / ERR(Red)</td>
</tr>
<tr><td>Switch
	</td>
	<td>Push switch</td>
</tr>
<tr><td>Physical dimensions (mm)
	</td>
	<td>110(W) x 74.8(D) x 95(H)mm (not include projection)</td>
</tr>
<tr><td>Weight
	</td>
	<td>250g</td>
</tr>
<tr><td>Installation method
	</td>
	<td>Quick installation on a 35 mm DIN rail<br>
Vertical installation with screws *4</td>
</tr>
<tr>
	<td>Operating ambient temperature</td>
	<td>Vertical Installation -20 - +60°C, Vertical installation with an angle of 90° to the right/left, Horizontal installation: -20 - +55°C</td>
</tr>
<tr>
	<td>Operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
	<tr>
	<td>Non-operating ambient temperature</td>
	<td>-20 - +60°C</td>
</tr>
<tr>
	<td>Non-operating ambient humidity</td>
	<td>10 - 90%RH (No condensation)</td>
</tr>
	<tr>
	<td>Floating dust particles</td>
	<td>Not to be excessive</td>
</tr>
<tr>
	<td>Corrosive gases</td>
	<td>None</td>
</tr>
<tr>
	<td>Line-noise resistance</td>
	<td>AC Line/±2kV *5</br> Signal Line /±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
	<td>Static electricity resistance</td>
	<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2), 
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
	<tr>
	<td>Vibration resistance, Sweep resistance</td>
	<td>10 - 57Hz *6 /semi-amplitude vibration 0.15mm,
57 - 150Hz/2.0G,  40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant,
IEC60068-2-6-compliant)</td>
</tr>
<tr>
	<td>Shock resistance</td>
	<td>15G half-sine shock for 11ms in X, Y, and Z directions, (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)</td>
</tr>
	<tr>
	<td>Grounding</td>
	<td>Class D grounding (previous class 3 grounding), SG-FG/ non-conduction</td>
</tr>
<tr>
	<td>Standard</td>
	<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive), UL</td>
</tr>
</tbody></table>

<p><strong>LAN</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Transmission standard
	</td>
	<td>10BASE-T/100BASE-TX</td>
</tr>
<tr><td>The number of channels
	</td>
	<td>2 (which contains a swith function ) *1</td>
</tr>
<tr><td>Connector
	</td>
	<td>RJ-45 Connector</td>
</tr>
	<tr><td>LED
	</td>
	<td>Speed (Orange), Link / Act (Green)</td>
</tr>
</tbody></table>

<p><strong>microSD Card Slot</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Standard
	</td>
<td>SD standard follow</td>
</tr>
<tr><td>Connector
	</td>
<td>microSD memory card slot</td>
</tr>
</tbody></table>

<p><strong>Expansion Slot</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of slots</td>
<td>4</td>
</tr>
<tr>
<td>Maximum power supply</td>
<td>12 - 24V 200mA, 5V 250mA, 3.3V 200mA (per slot)</td>
</tr>
<tr>
<td>Number of insertions/removals</td>
<td>50 times (min)</td>
</tr>
</tbody></table>

<p><strong>RTC</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr><td>Monthly error</td>
	<td>±15 seconds or less (25°C)</td>
</tr>
<tr><td>Backup time</td>
	<td>Not equipped with the date retention battery for backup</td>
</tr>
	</tbody></table>
	
<p><strong>Power Supply *2</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>	
<tr><td>Rated input voltage</td>
	<td>12 - 24VDC</td>
</tr>
<tr><td>Input voltage range</td>
	<td>10.8 - 30VDC</td>
</tr>
<tr><td>Power consumption</td>
	<td>CPU Unit alone *3, 24V 0.08A (Typ.), 0.1A (Max.), 12V 0.15A (Typ.), 0.2A (Max.), With I/O module and USB, 24V 1.5A (Max.), 12V 2.0A (Max.)</td>
</tr>
<tr><td>Connector</td>
	<td>2 pieces 3.5mm pitch 3-pin Terminal (V+, V-, FG)</td>
</tr>
<tr><td>Applicable wire</td>
	<td>AWG24 - 16</td>
</tr>
<tr>
	<td>Surge protection element V+ - V-, V- - FG</td>
	<td>Interactive TVS Diode, Stand off voltage : ±30V, Peak pulse power : 400W (1ms)</td>
</tr>
</tbody></table>

<p>Notes: </p>
<p>*1 The CPSN-MCB271-1-041 model contains a switch function and can configure a network like daisy-chain.</p>
connection between LAN A port and LAN B port.</p>
<p>*2 Use power cable within 3meters.</p>
<p>*3 With no USB load and no expansion slot load.</p>
<p>*4 Commercially available screws are required.</p>
<p>*5 When an optional power product is used.</p>
<p>*6 When an optional power product is used : 10 - 55Hz (See the manual of optional power product for details).</p>
</div>

+ Add unique tab for product page

CPSN-SSI-4C Thermocouple Module for CONPROSYS Nano Series 4ch

For unique tab:

<p><strong>Installation Environment Requirements</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Operating ambient temperature</td>
<td>-20 - +60°C (Wall installation at an angle of 0°) <br>-20°C to +55°C with a vertical installation at an angle of 90° to the left/right or with a plane installation</td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Non-operating ambient temperature</td>
<td>-20 - +60°C</td>
</tr>
<tr>
<td>Non-operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
	<td>Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2) <br>Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
<td>Sweep resistance</td>
<td>10 - 57Hz *4 /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C60068-2-6- compliant, IEC60068-2-6-compliant)</td>
</tr>
<tr>
<td>Shock resistance</td>
<td>15G half-sine shock for 11ms in X, Y, and Z directions (JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)</td>
</tr>
<tr>
<td>Standard</td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)</td>
</tr>
<tr>
<td>Notes:</td>
<td>*4 With the optional DIN rail fitting power supply: 10 - 55Hz (for details, see the user’s guide of the optional power supply).</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CT-RU101PA 10.1” Fully Rugged Tablet

For unique tab:

<div style="overflow-x:auto;">
<p><strong><a title="CT-RU101PA Data Sheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/CT-RU101PA_10.1_in._Rugged_Tablet.pdf?v=1595357726" rel="noopener">Download CT-RU101PA Data Sheet</a></strong></p>
<table class="spec">
<tbody>
<tr>
<td width="70%" colspan="2"><strong>System</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>Additional Configuration Options</strong><br /><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></td>
</tr>
<tr>
<td>Model</td>
<td>CT-RU101PA</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>CPU </td>
<td>Intel® ATOM™ Processor E3827 (1.75 GHz) (4:3)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>System Memory </td>
<td>1x DDR3L SO‐DIMM up to 4 GB</td>
<td style="border-left: 1px solid #cdd0d4;">4G RAM, 8G RAM</td>
</tr>
<tr>
<td>Ethernet</td>
<td>Gigabit Ethernet (RJ45)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Security </td>
<td>TPM 1.2, Phoenix SecureWipe by request</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage</td>
<td>128G mSATA SSD <br>
Optional: 256GB mSATA SSD </td>
<td style="border-left: 1px solid #cdd0d4;">128G SSD, 256G SSD, 512G SSD</td>
</tr>
<tr>
<td>Expansion Slot</td>
<td>1x mPCIe (full size)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Communication</td>
<td>WiFi 802.11 a/b/g/n/ac, Bluetooth V4.0 + EDR, GNSS, 4G LTE (optional), NFC (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> No LTE, 4G LTE</td>
</tr>
<tr>
<td>OS Support </td>
<td>Windows 10 IoT Enterprise, Linux</td>
<td style="border-left: 1px solid #cdd0d4;">Windows® 10 IoT Enterprise Entry (64bit, Multi-Language), Linux Ubuntu  - Driver, Linux Debian - Driver</td>
</tr>
<tr>
<td>Barcode Scanner</td>
<td>Optional 1D/2D integrated barcode scanner</td>
<td style="border-left: 1px solid #cdd0d4;">NO Barcode, 1D/2D barcode</td>
</tr>
<tr>
<td colspan="2" bl><b>Display and Touch</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>LCD Size / Type </td>
<td>10.1” TFT LCD</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Panel Ratio</td>
<td>16:10</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Resolution </td>
<td>1920 x 1200 (Pixels)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Brightness</td>
<td>1,000 nits</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Touch Screen </td>
<td>PCAP Multi-Touch supports gloved touch, water rejection, palm rejection</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Glass Type</td>
<td>2mm hard top Gorilla Glass</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Rubber Bumper</td>
<td>Integrated </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Physical Properties</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Dimensions (WxDxH) </td>
<td>280 x 195 x 23 (mm)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Net Weight</td>
<td>1.33 Kg (2.93 lbs) ²</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>I/O Ports</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>USB 2.0 Type A</td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>USB 3.0 Type A</td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>RS232 (optional USB 2.0 Type A) </td>
<td>x1 </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Audio headset Jack</td>
<td>x1 (Headphone / microphone combo)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Docking connector </td>
<td>x1 (12-pin)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro SD slot </td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro SIM slot </td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro HDMI </td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>RF Pass-through Connector for WLAN/GNSS/WWAN  </td>
<td>x2</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Power Requirements</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>AC adapter </td>
<td>65W, 100-240V AC, 50/60Hz</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Battery</td>
<td>4500mAh hot-swappable battery, 6 hours battery life ¹
9000mAh hot-swappable battery, up to 12 hours battery life (optional) ¹</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Environment</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-20 to 50 °C </td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage Temperature </td>
<td>-30 to 70 °C </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Humidity (RH) </td>
<td>95% (non-condensing) </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>IP Rating</td>
<td>Full IP65</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Ruggedness  </td>
<td>MIL-STD-810G certified, 
5-foot drop resistance
</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Regulatory Certifications</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>EMC & Safety</td>
<td>FCC-B, CE, CB</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Notes:</td>
<td>1.	The specified battery life was defined by MobileMark 2012 productivity mode testing with the wireless on.  Battery life rating is for comparison purposes only.  Actual battery life may vary based on configuration, application, power management, and operating conditions. <br>
2.	Actual weight varies by configurations and optional accessories <br>

* Specification subject to change without notice. Updated 23-Jun-2020.
</td>
<td style="border-left: 1px solid #cdd0d4;"> <b>Aditional accesories</b><br> Shoulder Strap with D rings<br> Top Carry Handle with D rings <br>Hand Strap with D rings <br> D rings x 4 <br> Tablet Vehicle Charger <br> Desktop Docking USB2.0 x 4/RJ45 x 1/VGA x 1/HDMI x 1  <br> 2-bay Battery Charger <br> Standard 4500 mAh Battery <br> Extended 9000 mAh Battery
</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CT-RU101PB 10.1" Rugged Tablet PC

For unique tab:

<div style="overflow-x:auto;">
<p><strong><a title="CT-RU101PB Data Sheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/CT-RU101PB_10.1_in._Rugged_Tablet.pdf?v=1593635521" rel="noopener">Download CT-RU101PB Data Sheet</a></strong> </p>
<table class="spec">
<tbody>
<tr>
<td width="70%" colspan="2"><strong>System</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>Additional Configuration Options</strong><br /><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></td>
</tr>
<tr>
<td>Model</td>
<td>CT-RU101PB</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>CPU </td>
<td>Intel Quad Core Celeron N2930 Bay Trail Processor</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>System Memory </td>
<td>1x DDR3L SDRAM up to 8 GB</td>
<td style="border-left: 1px solid #cdd0d4;">4G RAM, 8G RAM</td>
</tr>
<tr>
<td>Security </td>
<td>TPM 1.2 (upon request)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Mobile Device Mgmt. </td>
<td>SOTI Mobicontrol compatible (Optional)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage</td>
<td>128G mSATA SSD <br>
Optional: 256GB mSATA SSD</td>
<td style="border-left: 1px solid #cdd0d4;">128G SSD, 256G SSD, 512G SSD</td>
</tr>
<tr>
<td>Expansion Port</td>
<td>1 x Expansion Connector for USB 2.0/FullRS232 (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Communication</td>
<td>WiFi 802.11 a/b/g/n, Bluetooth 4.0, GPS (u-Blox Neo-6Q), 4G LTE (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> No LTE, 4G LTE</td>
</tr>
<tr>
<td>OS Support </td>
<td>Windows 10 IoT Enterprise, Linux</td>
<td style="border-left: 1px solid #cdd0d4;">Windows® 10 IoT Enterprise Entry (64bit, Multi-Language), Linux Ubuntu, Linux Debian</td>
</tr>
<tr>
<td colspan="2" bl><b>Display and Touch</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>LCD Size / Type </td>
<td>10.1” TFT IPS LCD</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Panel Ratio</td>
<td>16:10</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Resolution </td>
<td>1920 x 1200 (Pixels)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Brightness</td>
<td>700 nits</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Touch Screen </td>
<td>PCAP 10-point Multi-Touch support Rain, Stylus, Glove modes</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Keyboard</td>
<td>On-screen QWERTU keyboard</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Button</td>
<td>1 x power, 1 x Home, 2 x volume (+/-) key, <br>
2 x function key (programmable configured by Hottab Utility)
 </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>LED indicators</td>
<td>Power, Battery, HDD, RF</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Physical Properties</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Dimensions (WxDxH) </td>
<td>271.8 x 197.2 x 19 (mm) ²</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Net Weight</td>
<td>1.2 kg (2.7 lbs.) with standard battery <br>
1.4 kg (3.1 lbs.) with optional high capacity battery
</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>I/O Ports</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Docking Connector</td>
<td>x1 19-pin docking connector</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro HDMI</td>
<td>x1 (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>USB 3.0 Type A  </td>
<td>x1 </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Expansion Port</td>
<td>x1 Expansion Connector for USB2.0 / Full RS232 (optional) </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Audio Conector  </td>
<td>x1 Audio combo connector (Mic in or Line Out)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro SD slot </td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>LAN/RS232  </td>
<td>x1 30-pin Combo conn (Giga-LAN or RS232)  </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Cameras & Data Capture</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Web Camera  </td>
<td>2MP front webcam, 5MP rear camera with auto focus and LED light </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Barcode</td>
<td>1D/2D Barcode Reader (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> NO Barcode, 1D/2D barcode (integrated) </td>
</tr>
<tr>
<td colspan="2" bl><b>Audio</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Microphone  </td>
<td>x1 Built-in Mic</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Speaker</td>
<td>x2 1-watt speakers</td>
</tr>
<tr>
<td colspan="2" bl><b>Power Requirements</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>AC adapter </td>
<td>100-240V, 50-60Hz / 19V DC</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Battery</td>
<td>7.4V, typ. 5140 mAh Li-polymer hot swappable battery, 8 hours battery life (standard)¹ <br>
7.4V, typ. 10280 mAh Li-polymer hot swappable battery, 16 hours battery life (Optional) ¹
</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Environment</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-20 to 60 °C (AC mode), -10 to 50 °C (Battery mode) </td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage Temperature </td>
<td>-30 to 70 °C </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Humidity (RH) </td>
<td>10% to 90% (non-condensing) </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>IP Rating</td>
<td>IP65 Certified</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Shock  </td>
<td>MIL-STD-810G Method 516.6 Procedure I</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Vibration  </td>
<td>MIL-STD-810G Method 514.6 Procedure I</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Drop  </td>
<td>MIL-STD-810G Method 516.6, 4 ft to concrete ³</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Regulatory Certifications</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>EMC & Safety</td>
<td>FCC, CE</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Standard Accessories</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2">1 x Adapter and power cord </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2">1 x Standard Battery</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2">1 x Capacitive Stylus</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Notes:</td>
<td>1.	Measured at dimming LCD brightness.  Varies depending on the usage conditions, or when an external device is attached.  <br> 
2.	Length measurements do not include protrusions.  Weight varies with options and digitizer pen.  <br>
3.	The drop test with high-capacity battery must come with hand strap. <br>

* Specification subject to change without notice. Updated 24-Jun-2020.

</td>
<td style="border-left: 1px solid #cdd0d4;"> <b>Aditional accesories</b><br> Hand Strap <br>7.4V/10280 mAh Li-Polymer Battery <br>Shoulder Strap  <br>Desk Docking  <br> Vehicle Docking <br> VESA Mounting Kit<br> 2-Bay Battery Charger

</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

CT-RU104PA 10.1” Fully Rugged Tablet

For unique tab:

<div style="overflow-x:auto;">
<p><strong><a title="CT-RU104PA Data Sheet" href="https://cdn.shopify.com/s/files/1/0321/0857/6904/files/CT-RU104PA_10.4_in._Rugged_Tablet.pdf?v=1595357726" rel="noopener">Download CT-RU104PA Data Sheet</a></strong> </p>
<table class="spec">
<tbody>
<tr>
<td width="70%" colspan="2"><strong>System</strong></td>
<td style="border-left: 1px solid #cdd0d4;" width="30%"><strong>Additional Configuration Options</strong><br /><strong>Please <a title="Contact Us" href="https://eshop.contecamericas.com/pages/contact-us"><span style="text-decoration: underline; color: #0000ff;">contact us</span></a> to request a quote</strong></td>
</tr>
<tr>
<td>Model</td>
<td>CT-RU104PA</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>CPU </td>
<td>Intel® ATOM™ Processor E3827 (1.75 GHz)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>System Memory </td>
<td>1x DDR3L SO‐DIMM up to 4 GB</td>
<td style="border-left: 1px solid #cdd0d4;">4G RAM, 8G RAM</td>
</tr>
<tr>
<td>Ethernet</td>
<td>Gigabit Ethernet (RJ45)</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Security </td>
<td>TPM 1.2</td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage</td>
<td>64GB mSATA SSD <br>Optional: 128GB/256GB mSATA SSD  </td>
<td style="border-left: 1px solid #cdd0d4;">64G SSD, 128G SSD, 256G SSD, 512G SSD</td>
</tr>
<tr>
<td>Expansion Slot</td>
<td>N/A</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Communication</td>
<td>WiFi 802.11 a/b/g/n/ac, Bluetooth V4.0 + EDR, GNSS, 4G LTE (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> No LTE, 4G LTE</td>
</tr>
<tr>
<td>OS Support </td>
<td>Windows 10 IoT Enterprise, Linux</td>
<td style="border-left: 1px solid #cdd0d4;">Windows® 10 IoT Enterprise Entry (64bit, Multi-Language), Linux Ubuntu  - Driver, Linux Debian - Driver</td>
</tr>
<tr>
<td>Barcode Scanner</td>
<td>Optional Snap on Barcode Reader </td>
<td style="border-left: 1px solid #cdd0d4;">NO Barcode, Snap on Barcode Reader</td>
</tr>
<tr>
<td colspan="2" bl><b>Display and Touch</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>LCD Size / Type </td>
<td>10.4” TFT LCD</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Panel Ratio</td>
<td>4:3</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Resolution </td>
<td>1024 x 768 (Pixels)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Max. Brightness</td>
<td>350 nits</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Touch Screen </td>
<td>PCAP Multi-Touch supports gloved touch, water rejection, palm rejection</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Glass Type</td>
<td>2mm hard top Gorilla Glass</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Rubber Bumper</td>
<td>Not Integrated and is optional  </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Physical Properties</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Dimensions (WxDxH) </td>
<td>275 x 204 X27 (mm) with rubber bumper</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Net Weight</td>
<td>1.3 Kg (2.87 lbs) ²</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>I/O Ports</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>USB 2.0 Type A</td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>USB 3.0 Type A</td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>RS232 (optional USB 2.0 Type A) </td>
<td>N/A </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Audio headset Jack</td>
<td>x1 (Headphone / microphone combo)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Docking connector </td>
<td>x1 (32-pin)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro SD slot </td>
<td>N/A</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro SIM slot </td>
<td>x1</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Micro HDMI </td>
<td>N/A</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>RF Pass-through Connector for WLAN/GNSS/WWAN  </td>
<td>N/A</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Power Requirements</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>AC adapter </td>
<td>65W, 100-240V AC, 50/60Hz</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Battery</td>
<td>3800mAh standard battery <br>
4500mAh hot swappable battery (optional)</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Environment</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Temperature</td>
<td>-20 to 50 °C </td>
<td style="border-left: 1px solid #cdd0d4;"></td>
</tr>
<tr>
<td>Storage Temperature </td>
<td>-30 to 70 °C </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Operating Humidity (RH) </td>
<td>95% (non-condensing) </td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>IP Rating</td>
<td>Full IP65</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Ruggedness  </td>
<td>MIL-STD-810G certified, 6-foot drop resistance ³
</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td colspan="2" bl><b>Regulatory Certifications</b></td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>EMC & Safety</td>
<td>FCC-B, CE, CB</td>
<td style="border-left: 1px solid #cdd0d4;"> </td>
</tr>
<tr>
<td>Notes:</td>
<td>1.	The specified battery life was defined by MobileMark 2012 productivity mode testing with the wireless on.  Battery life rating is for comparison purposes only.  Actual battery life may vary based on configuration, application, power management, and operating conditions. <br>
2.	Actual weight varies by configurations and optional accessories <br>
3.	Testing is conducted and product certified with rubber bumper on.  Rubber bumper is an optional ítem for this model.<br>

* Specification subject to change without notice. Updated 24-Jun-2020.

</td>
<td style="border-left: 1px solid #cdd0d4;"> <b>Aditional accesories</b><br> Rubber Bumper<br> Shoulder Strap with D rings<br> Top Carry Handle with D rings <br>Hand Strap with D rings <br> D rings x 4 <br> Tablet Vehicle Charger <br> Desktop Docking USB2.0 x 4/RJ45 x 1/VGAx1  <br> 1-bay 2nd Battery Charger <br> External 2nd 4200 mAh Battery with hook
</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

DIO-0404LY-WQ-US Isolated Digital I/O Terminal for Sub-1GHz band Wireless

For unique tab:

<tr>
<td rowspan="7">Digital output</td>
<td>Output type</td>
<td>Opto-coupler isolated open-collector output (current sink type) (negative logic)</td>
</tr>
<tr>
<td>Rated output voltage</td>
<td>35VDC</td>
</tr>
<tr>
<td>Rated output current</td>
<td>Up to100mA</td>
</tr>
<tr>
<td>Response time</td>
<td>Within 200µsec *2</td>
</tr>
<tr>
<td>Residual Voltage with Output ON</td>
<td>0.5V or less(Output current≤50mA)<br>
1.0V or less(Output current≤100mA)</td>
</tr>
<tr>
<td>Number of output signal channels</td>
<td>4 (Common)</td>
</tr>
<tr>
<td>Protection circuit</td>
<td>42.3V(Min.) Zener diode protection (each channel) 1 time fuse</td>
</tr>
<tr>
<tr>
<td rowspan="4">Digital input <br>Digital output common</td>
<td>Interface connector</td>
<td>14-pin terminal connector (screw type)</td>
</tr>
<tr>
<td>External power voltage</td>
<td>12 - 24VDC (±10%)</td>
</tr>
<tr>
<td>Voltage resistance</td>
<td>1000Vrms</td>
</tr>
<tr>
<td>Applicable wire</td>
<td>AWG28 - 16</td>
</tr>
<tr>
<td rowspan="4">USB</td>
<td>Bus specification</td>
<td>USB Specification 2.0/1.1-compliant</td>
</tr>
<tr>
<td>Data transmission speed</td>
<td>12Mbps (Full speed), 480Mbps (High speed)</td>
</tr>
<tr>
<td>Function</td>
<td>USB device</td>
</tr>
<tr>
<td>Connector</td>
<td>mini-B USB connector </td>
</tr>
<td colspan="2" >Antenna</td>
<td>Non-directional dipole antenna (2.0±0.7dBi)</td>
</tr>
<tr>
<td rowspan="3">Power supply</td>
<td>Input voltage range</td>
<td>12 - 24VDC±5%</td>
</tr>
<tr>
<td>Current consumption</td>
<td>80mA (at 12VDC input) (Max.),<br>
40mA (at 24VDC input) (Max.)</td>
</tr>
<tr>
<td>Power connector *3</td>
<td>European type terminal 3.5 pitch 3-pin jack connector</td>
</tr>
<tr>
<td colspan="2" >Physical dimensions (mm)</td>
<td>62.0(W) x 64.0(D) x 24.0(H) (No projection included)</td>
</tr>
<tr>
<td colspan="2" >Weight</td>
<td>100g (Body), <br>
150g (With bundled antenna, power connector, Interface connector</td>
</tr>
<tr>
<td colspan="2" >Notes:</td>
<td>*1 It is a theoretical maximum value on wireless communication and does not indicate the actual
data speed.<br>
*2 Response time is given when input resistance 4.7kΩ and 12 - 24VDC (±10%) <br>
*3 This product cannot be used with USB bus power. Make sure to use the external power that
supplies 12VDC or 24VDC voltage.</td>
</tr>
</tbody></table>

<p><strong>Environmental Specifications</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Operating ambient temperature</td>
<td>-20 -+60°C*4</td>
</tr>
<tr>
<td>Operating ambient humidity</td>
<td>10 - 90%RH (No condensation)</td>
</tr>
<tr>
<td>Floating dust particles</td>
<td>Not to be excessive</td>
</tr>
<tr>
<td>Corrosive gases</td>
<td>None</td>
</tr>
<tr>
<td>Line noise</td>
<td>AC Line/±2kV, Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)</td>
</tr>
<tr>
<td>Static electricity resistance</td>
<td>Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)<br> Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)</td>
</tr>
<tr>
<td>Sweep resistance</td>
	<td>10 - 57Hz /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G <br>40minutes each in X, Y, and Z directions (JIS C60068-2-6-compliant, IEC60068-2- 6-compliant)</td>
</tr>
<tr>
<td>Shock resistance</td>
<td>147m/s2(15G)/11ms/half-sine shock (JIS C 60068-2-27 -compliant, IEC 60068-2- 27 -compliant)</td>
</tr>
<tr>
<td>Standard</td>
<td>FCC Class A, RoHS Directive</td>
</tr>
<tr>
<td>Notes: </td>
<td>*4 Specification temperature of POA201-10-2 is 0 - 40°C.<br>
*5 When using an optional AC adapter POA201-10-2.</td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

DIO-0808LY-USB Digital I/O USB I/O unit

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of input signal
points</td>
<td>8 points (1 common)</td>
</tr>
<tr>
<td>Number of output channels</td>
<td>4ch</td>
</tr>
<tr>
<td>Input format</td>
<td>Opto-isolated input (Compatible with current sink output)
(Negative logic *1)</td>
</tr>
<tr>
<td>Input resistance</td>
<td>4.7 kΩ</td>
</tr>
<tr>
<td>Input ON current</td>
<td>2.0mA or more</td>
</tr>
<tr>
<td>Input OFF current</td>
<td>0.16mA or less</td>
</tr>
<tr>
<td>Response time</td>
<td>300µsec within *2</td>
</tr>
</tbody></table>

<p><strong>USB</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Bus specification</td>
<td>USB Specification 2.0/1.1 standard</td>
</tr>
<tr>
<td>USB transfer rate</td>
<td>12Mbps (Full-speed), 480Mbps (High-speed) *3</td>
</tr>
<tr>
<td>Power supply</td>
<td>Bus power</td>
</tr>
</tbody></table>

<p><strong>Common section</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Connector</td>
<td>14 pin (screw-terminal) plug header</td>
</tr>
<tr>
<td>Number of terminals used at the same time</td>
<td>127 terminals (Max.) *4</td>
</tr>
<tr>
<td>Dielectric strength</td>
<td>1000Vrms</td>
</tr>
<tr>
<td>External circuit power supply *5</td>
<td>12 - 24VDC (±10%)</td>
</tr>
<tr>
<td>Current consumption (Max.)</td>
<td>5VDC 250mA</td>
</tr>
<tr>
<td>Operating conditions</td>
<td>0 - 50ºC, 10 - 90% RH (No condensation)</td>
</tr>
<tr>
<td>Allowable distance of signal extension</td>
<td>Approx. 50m (depending on wiring environment)</td>
</tr>
<tr>
<td>Physical dimensions (mm)</td>
<td>64(W) x 62(D) x 24(H) (exclusive of protrusions)</td>
</tr>
<tr>
<td>Weight</td>
<td>70g (Not including the USB cable, attachment)</td>
</tr>
<tr>
<td>Attached cable</td>
<td>USB cable 1.8m</td>
</tr>
<tr>
<td>Compatible wires</td>
<td>AWG28 - 16</td>
</tr>
<tr>
<td>Notes</td>
<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively.<br>
	*2 The opto-coupler's response time comes.<br>
*3 This depends on the host PC environment used (OS and USB host controller).<br>
*4 As a USB hub is also counted as one device, you cannot just connect 127 USB terminals.<br>
*5 External circuit power supply is required separately.</td>
</tr>
</tbody>
	</table></div>

+ Add unique tab for product page

DIO-0808RN-USB Digital I/O USB I/O unit 8ch/8ch

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Input</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of input signal
points</td>
<td>8 points (1 common)</td>
</tr>
<tr>
<td>Input format</td>
<td>4ch</td>
</tr>
<tr>
<td>Input format</td>
<td>Opto-isolated input (Compatible with current sink /
current source output) (Negative logic *1)</td>
</tr>
<tr>
<td>Input resistance</td>
<td>4.7 kΩ</td>
</tr>
<tr>
<td>Input ON current</td>
<td>2.0mA or more</td>
</tr>
<tr>
<td>Input OFF current</td>
<td>0.16mA or less</td>
</tr>
<tr>
<td>Response time</td>
<td>Within 200µsec within *2</td>
</tr>
<tr>
<td>Dielectric strength</td>
<td>500Vrms</td>
</tr>
<tr>
<td>Dielectric strength *5</td>
<td>12 - 24VDC (±10%)</td>
</tr>
</tbody></table>

<p><strong>Output</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of output signal points</td>
<td>8 channels (independent common)</td>
</tr>
<tr>
<td>Output format</td>
<td>SPDT Relay Output (Form C)</td>
</tr>
<tr>
<td>Max. rating capacity of Relay Contact</td>
<td>6A 240VAC, 5A 28VDC (load resister)</td>
</tr>
<tr>
<td>Max. permitted voltage of Relay Contact</td>
<td>240V (Max.) *7, *8</td>
</tr>
<tr>
<td>Max. Carry Current of Relay Contact</td>
<td>5A (Max.)</td>
</tr>
<tr>
<td>Contact resistance (Initial state) of Relay Contact</td>
<td>100mΩ max.</td>
</tr>
<tr>
<td>Operate time of Relay Contact</td>
<td>Within 10ms</td>
</tr>
<tr>
<td>Release time of Relay Contact</td>
<td>Within 5ms</td>
</tr>
<tr>
<td>Mechanical Life Expectancy of Relay Contact</td>
<td>10,000,000 operations min or more Switching times : 300 operations/min</td>
</tr>
<tr>
<td>Electrical Lifetime of Relay Contact</td>
<td>50,000 operations min. Switching times : 30 operations/min</td>
</tr>
<tr>
<td>Relay Type of Relay Contact</td>
<td>G6RL-1</td>
</tr>
	</tbody></table>

<p><strong>USB</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Bus specification</td>
<td>USB Specification 2.0/1.1standard</td>
</tr>
<tr>
<td>USB transfer rate</td>
<td>12Mbps (Full-speed), 480Mbps (High-speed) *3</td>
</tr>
<tr>
<td>Power supply</td>
<td>Bus power</td>
</tr>
</tbody></table>

<p><strong>Common section</strong></p>
<table class="spec">
<tbody>
<tr>
<td width="30%"><strong>Model</strong></td>
<td width="60%"><strong>Online Model</strong></td>
</tr>
<tr>
<td>Number of terminals used at
the same time</td>
<td>127 terminals (Max.) *4</td>
</tr>
<tr>
<td>Current consumption (Max.)</td>
<td>5VDC 430mA</td>
</tr>
<tr>
<td>Operating conditions *6</td>
<td>0 - 50ºC, 10 - 90% RH (No condensation)</td>
</tr>
<tr>
<td>Allowable distance of signal extension</td>
<td>Approx. 50m (depending on wiring environment)</td>
</tr>
<tr>
<td>Physical dimensions (mm)</td>
<td>188.0(W)×78.0(D)×30.5(H) (No protrusions)</td>
</tr>
<tr>
<td>Weight</td>
<td>300g (Not including the USB cable, attachment)</td>
</tr>
<tr>
<td>Connector</td>
<td>10 pin (screw-terminal) plug header x4</td>
</tr>
<tr>
<td>Attached cable</td>
<td>USB Cable 1.8m</td>
</tr>
<tr>
<td>Notes</td>
	<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively.<br>
*2 The Optocoupler's response time comes.<br>
*3 This depends on the PC environment used (OS and USB host controller).<br>
*4 As a USB hub is also counted as one device, you cannot just connect 127 USB units.<br>
*5 External circuit power supply is required.<br>
*6 To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around this product.<br>
*7 Please don’t exceed either max. permitted voltage or max. rating capacity of the use relay when using it by the voltage that exceeds 28VDC. Doing so can cause a malfunction.<br>
*8 The potential difference between channels must not exceed 240V in the maximum. Doing
so can cause a malfunction.</td>
</tr>
</tbody>
	</table></div>

+ Add unique tab for product page

DIO-1616HN-USB Digital I/O USB I/O unit 16ch/16ch (isolated 5 - 50VDC) - the N series

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specification  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="3" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>Specification</strong></td>
</tr>
<tr>
<td rowspan="6">Input</td>
<td colspan="2">Number of input signal channels</td>
<td>16 channels (1 common) </td>
</tr>
<tr>
<td colspan="2">Input format </td>
<td>Opto-isolated input (Compatible with current sink output)
(Negative logic *1) </td>
</tr>
<tr>
<td colspan="2">Input resistance </td>
<td>560Ω</td>
</tr>
<tr>
<td colspan="2">Input ON current </td>
<td>1.15mA or more </td>
</tr>
<tr>
<td colspan="2">Input OFF current </td>
<td>0.16mA or less </td>
</tr>
<tr>
<td colspan="2">Response time</td>
<td>Within 200µsec *2 </td>
</tr>
<tr>
<td rowspan="7">Output </td>
<td colspan="2">Number of output signal channels </td>
<td>16 channels (8 channels share 1 common)  </td>
</tr>
<tr>
<td colspan="2">Output format  </td>
<td>Opto-isolated open collector output (Compatible with current sink)(Negative logic *1)  </td>
</tr>
<tr>
<td rowspan="2">Output rating</td>
<td>Output voltage</td>
<td>60VDC (Max.) </td>
</tr>
<tr>
<td>Output current </td>
<td>100mA (par channel) (Max.)  </td>
</tr>
<tr>
<td colspan="2">Residual voltage with output ON </td>
<td>0.5V or less (Output current ≤ 50mA), 1.0V or less
(Outputcurrent ≤ 100mA)</td>
</tr>
<tr>
<td colspan="2">Surge protector  </td>
<td>Zener diode RD68FM(NEC) or the equivalence for it </td>
</tr>
<tr>
<td colspan="2">Response time </td>
<td>Within 200µsec *2  </td>
</tr>
<tr>
<td rowspan="3">USB section </td>
<td colspan="2">Bus specification </td>
<td>USB Specification 2.0/1.1standard  </td>
</tr>
<tr>
<td colspan="2">USB transfer rate  </td>
<td>12Mbps (Full-speed), 480Mbps (High-speed) *3  </td>
</tr>
<tr>
<td colspan="2">Power supply</td>
<td>Bus power</td>
</tr>
<tr>
<td rowspan="10">Common section  </td>
<td colspan="2">Number of terminals used at the same time  </td>
<td>127 terminals (Max.) *4  </td>
</tr>
<tr>
<td colspan="2">Dielectric strength  </td>
<td> 500Vrms  </td>
</tr>
<tr>
<td colspan="2">External circuit power supply *5 </td>
<td>5 – 50VDC (±10%) </td>
</tr>
<tr>
<td colspan="2"> Current consumption (Max.) </td>
<td>5VDC 300mA </td>
</tr>
<tr>
<td colspan="2">Operating conditions*6 </td>
<td>0 - 50ºC, 10 - 90%RH (No condensation)  </td>
</tr>
<tr>
<td colspan="2">Allowable distance of signal extension </td>
<td>Approx. 50m (depending on wiring environment)  </td>
</tr>
<tr>
<td colspan="2">Physical dimensions (mm)  </td>
<td>188.0(W)×78.0(D)×30.5(H) (No protrusions)  </td>
</tr>
<tr>
<td colspan="2">Weight  </td>
<td> 300g (Not including the USB cable, attachment) </td>
</tr>
<tr>
<td colspan="2">Connector </td>
<td> 10 pin (screw-terminal) plug header x4 
</td>
</tr>
<tr>
<td colspan="2">Attached cable  </td>
<td>USB cable 1.8m  </td>
</tr>
<tr>
<td colspan="3" >Notes:</td>
<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively.<br>
*2 The Optocoupler's response time comes.<br>
*3 This depends on the PC environment used (OS and USB host controller).<br>
*4 As a USB hub is also counted as one device, you cannot just connect 127 USB unit.<br>
*5 External circuit power supply is required.<br>
*6 To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around
this product. </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

DIO-1616L-PEDigital I/O PCI Express Card 16ch/16ch (Isolated 12 - 24VDC)

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specification  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="3" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>Specification</strong></td>
</tr>
<tr>
<td rowspan="7">Input</td>
<td colspan="2">Input format</td>
<td>Opto-coupler isolated input (Compatible with current sink output) (Negative logic *1) </td>
</tr>
<tr>
<td colspan="2">Number of input signal channels </td>
<td>16ch (all available for interrupts) (1 common in 16ch) </td>
</tr>
<tr>
<td colspan="2">Input resistance </td>
<td>4.7kΩ</td>
</tr>
<tr>
<td colspan="2">Input ON current </td>
<td>2.0mA or more </td>
</tr>
<tr>
<td colspan="2">Input OFF current </td>
<td>0.16mA or less </td>
</tr>
<tr>
<td colspan="2">Interrupt </td>
<td>16 interrupt input signals are arranged into a single output of interrupt signal INTA. <br>An interrupt is generated at the rising edge (HIGH-to-LOW transition) or falling edge (LOW-to-HIGH transition). 
 </td>
</tr>
<tr>
<td colspan="2">Response time</td>
<td>Within  200μsec </td>
</tr>
<tr>
<td rowspan="7">Output </td>
<td colspan="2">Output format </td>
<td>Opto-coupler isolated open collector output (current sink type)
(Negative logic *1)
 </td>
</tr>
<tr>
<td colspan="2">Number of output signal channels </td>
<td>16 channels (1 common) </td>
</tr>
<tr>
<td rowspan="2">Output rating</td>
<td>Output voltage</td>
<td>35VDC (Max.) </td>
</tr>
<tr>
<td>Output current </td>
<td>100mA (per channel) (Max.) </td>
</tr>
<tr>
<td colspan="2">Residual voltage with output ON </td>
<td>0.5V or less (Output current≤50mA), 1.0V or less (Output current≤100mA)</td>
</tr>
<tr>
<td colspan="2">Surge protector  </td>
<td>Zener diode RD47FM(NEC) or equivalent to it </td>
</tr>
<tr>
<td colspan="2">Response time </td>
<td>Within 200μsec </td>
</tr>
<tr>
<td rowspan="13">Common  </td>
<td colspan="2">Built-in power </td>
<td>None </td>
</tr>
<tr>
<td colspan="2">Allowable distance of signal extension </td>
<td>Approx. 50m (depending on wiring environment) </td>
</tr>
<tr>
<td colspan="2">I/O address  </td>
<td>Any 32-byte boundary  </td>
</tr>
<tr>
<td colspan="2">Interruption leve </td>
<td> 1 level use  </td>
</tr>
<tr>
<td colspan="2">Max. board count for connection </td>
<td>16 boards including the master board </td>
</tr>
<tr>
<td colspan="2"> Dielectric strength </td>
<td>1000Vrms </td>
</tr>
<tr>
<td colspan="2">External circuit power supply </td>
<td>12 - 24VDC(±10%) </td>
</tr>
<tr>
<td colspan="2">Power consumption </td>
<td>3.3VDC 350mA </td>
</tr>
<tr>
<td colspan="2">Operating condition </td>
<td>0 - 50 °C, 10 - 90%RH (No condensation) </td>
</tr>
<tr>
<td colspan="2">Bus specification  </td>
<td> PCI Express Base Specification Rev. 1.0a x1</td>
</tr>
<tr>
<td colspan="2">Dimension (mm) </td>
<td>121.69(L) x 110.18(H) </td>
</tr>
<tr>
<td colspan="2">Connector </td>
<td>37 pin D-SUB connector [F (female) type] <br>
DCLC-J37SAF-20L9E [mfd by JAE] or equivalent to it </td>
</tr>
<tr>
<td colspan="2">Weight  </td>
<td>130g </td>
</tr>
<tr>
<td colspan="3">Certification  </td>
<td>RoHS,CE,VCCI </td>
</tr>
<tr>
<td colspan="3" >Notes:</td>
<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively
 </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

DIO-1616LN-ETH Isolated Digital I/O Unit (16ch DI, 16ch DO) for Ethernet

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specification  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="3" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>Specifications</strong></td>
</tr>
<tr>
<td rowspan="6">Input </td>
<td colspan="2">Number of input signal channels</td>
<td>16 channels (8 channels share 1 common) </td>
</tr>
<tr>
<td colspan="2">Input format </td>
<td>Opto-isolated input (Compatible with current sink output and current source output) <br>(Negative logic *1) </td>
</tr>
<tr>
<td colspan="2">Input resistance </td>
<td>15kΩ</td>
</tr>
<tr>
<td colspan="2">Input ON current </td>
<td>0.7mA or more </td>
</tr>
<tr>
<td colspan="2">Input OFF current </td>
<td>0.15mA or less </td>
</tr>
<tr>
<td colspan="2">Response time</td>
<td>Within 200µsec *2 </td>
</tr>
<tr>
<td rowspan="7">Output section </td>
<td colspan="2">Number of output signal channels </td>
<td>16 channels (8 channels share 1 common) </td>
</tr>
<tr>
<td colspan="2">Output format  </td>
<td>Opto-isolated open collector output (Compatible with current sink) (Negative logic *1) </td>
</tr>
<tr>
<td rowspan="2">Output rating</td>
<td>Output voltage</td>
<td>60VDC (Max.) </td>
</tr>
<tr>
<td>Output current </td>
<td>100mA (par channel) (Max.) </td>
</tr>
<tr>
<td colspan="2">Residual voltage with output ON </td>
<td>0.5V or less (Output current ≤ 50mA), 1.0V or less (Outputcurrent ≤ 100mA)</td>
</tr>
<tr>
<td colspan="2">Surge protector  </td>
<td>Zener diode CMZB68(TOSHIBA) or the equivalence for it  </td>
</tr>
<tr>
<td colspan="2">Response time </td>
<td>Within 200µsec *2 </td>
</tr>
<tr>
<td rowspan="3">LAN section </td>
<td colspan="2">Transmission standard </td>
<td>10BASE-T/100BASE-TX </td>
</tr>
<tr>
<td colspan="2">Connector </td>
<td>RJ-45 connector </td>
</tr>
<tr>
<td colspan="2">LED</td>
<td>Speed(Yellow), Link / Act(Green)</td>
</tr>
<tr>
<td rowspan="9">Common section  </td>
<td colspan="2">Dielectric strength  </td>
<td> 1000VAC  </td>
</tr>
<tr>
<td colspan="2">External circuit power supply*3 </td>
<td>12 - 24VDC(±10%) </td>
</tr>
<tr>
<td colspan="2"> Current consumption (Max.) </td>
<td>12VDC 250mA, 24VDC 150mA </td>
</tr>
<tr>
<td colspan="2">Operating conditions*4 </td>
<td>-20 - 60ºC, 10 - 90%RH (No condensation) </td>
</tr>
<tr>
<td colspan="2">Allowable distance of signal extension </td>
<td>Approx. 50m (depending on wiring environment) </td>
</tr>
<tr>
<td colspan="2">Physical dimensions (mm)  </td>
<td>188.0(W) x 78.0(D) x 30.5(H) (No protrusions) </td>
</tr>
<tr>
<td colspan="2">Weight  </td>
<td> 300g (Not including the USB cable, attachment, connector) </td>
</tr>
<tr>
<td colspan="2">Connector </td>
<td> 10 pin (screw-terminal) plug header x4 
</td>
</tr>
<tr>
<td colspan="2">Standard </td>
<td>VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive) </td>
</tr>
<tr>
<td colspan="3" >Notes:</td>
<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively. <br>
*2 The Optocoupler's response time comes.<br>
*3 External circuit power supply is required. <br>
*4 To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around this
product.  </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

DIO-1616LX-USB Digital I/O USB I/O Unit 16ch/16ch (isolated 12 - 24VDC) - The X Series

For unique tab:

<div style="overflow-x:auto;">
<p><strong>Specification  </strong></p>
<table class="spec">
<tbody>
<tr>
<td width="40%" colspan="3" align="center"><strong>Item  </strong></td>
<td width="60%"><strong>Specification</strong></td>
</tr>
<tr>
<td rowspan="7">Input</td>
<td colspan="2">Number of input signal channels</td>
<td>16 channels (all available for interrupts) (1 common in 16 channels) </td>
</tr>
<tr>
<td colspan="2">Input format </td>
<td>Optocoupler isolated input (Compatible with current sink output) (Negative logic *1) </td>
</tr>
<tr>
<td colspan="2">Input resistance </td>
<td>4.7kΩ</td>
</tr>
<tr>
<td colspan="2">Input ON current </td>
<td>2.0mA or more </td>
</tr>
<tr>
<td colspan="2">Input OFF current </td>
<td>0.16mA or less </td>
</tr>
<tr>
<td colspan="2">Interrupt </td>
<td>16 interrupt input signals are arranged into a single output of
interrupt request signal INTA. An interrupt is generated at
the rising edge (HIGH-to-LOW transition) or falling edge
(LOW-to-HIGH transition) (set by software). 
 </td>
</tr>
<tr>
<td colspan="2">Response time</td>
<td>200μsec within *2 </td>
</tr>
<tr>
<td rowspan="7">Output </td>
<td colspan="2">Number of output signal channels </td>
<td>16 channels </td>
</tr>
<tr>
<td colspan="2">Output format  </td>
<td>Optocoupler isolated open collector output (current sink type) (Negative logic*1) </td>
</tr>
<tr>
<td rowspan="2">Output rating</td>
<td>Output voltage</td>
<td>35VDC (Max.) </td>
</tr>
<tr>
<td>Output current </td>
<td>100mA (per channel) (Max.) </td>
</tr>
<tr>
<td colspan="2">Residual voltage with output ON </td>
<td>0.5V or less (Output current≤50mA), 1.0V or less (Output current≤100mA)</td>
</tr>
<tr>
<td colspan="2">Surge protector  </td>
<td>Zener diode RD47FM(NEC) or equivalent  </td>
</tr>
<tr>
<td colspan="2">Response time </td>
<td>200μsec within *2  </td>
</tr>
<tr>
<td rowspan="3">USB section </td>
<td colspan="2">Bus specification </td>
<td>USB Specification 2.0/1.1 standard  </td>
</tr>
<tr>
<td colspan="2">USB transfer rate  </td>
<td>12Mbps (Full-speed), 480Mbps (High-speed) *3   </td>
</tr>
<tr>
<td colspan="2">Power supply</td>
<td>Bus power / Self-power *4</td>
</tr>
<tr>
<td rowspan="10">Common section  </td>
<td colspan="2">Number of terminals used at the same time  </td>
<td>127 terminals (Max.) *5  </td>
</tr>
<tr>
<td colspan="2">Dielectric strength  </td>
<td> 1000Vrms  </td>
</tr>
<tr>
<td colspan="2">External circuit power supply*6  </td>
<td>12 - 24VDC(±10%) </td>
</tr>
<tr>
<td colspan="2"> Current consumption (Max.) </td>
<td>5VDC 300mA </td>
</tr>
<tr>
<td colspan="2">Operating conditions </td>
<td>0 - 50ºC, 10 - 90%RH (No condensation)   </td>
</tr>
<tr>
<td colspan="2">Allowable distance of signal extension </td>
<td>Approx. 50m (depending on wiring environment) </td>
</tr>
<tr>
<td colspan="2">Physical dimensions (mm)  </td>
<td>180(W) x 140(D) x 34(H) (No protrusions)  </td>
</tr>
<tr>
<td colspan="2">Weight  </td>
<td> 300g (Not including the USB cable, attachment) </td>
</tr>
<tr>
<td colspan="2">Connector </td>
<td> 37-pin D-SUB connector [F(female)type]
DCLC-J37SAF-20L9E [mfd.by JAE]or equivalence to it 
</td>
</tr>
<tr>
<td colspan="2">Attached cable  </td>
<td>USB cable 1.8m   </td>
</tr>
<tr>
<td colspan="3" >Notes:</td>
<td>*1 Data “0” and “1” correspond to the High and Low levels, respectively.<br>
*2 The Optocoupler's response time comes.<br>
*3 This depends on the PC environment used (OS and USB host controller).<br>
*4 Use 5VDC power supply for self-power when you use the USB hub function.<br>
*5 As a USB hub is also counted as one device, you cannot just connect 127 USB unit.<br>
*6 External circuit power supply is required separately.  </td>
</tr>
</tbody>
</table></div>

+ Add unique tab for product page

EDIT ADDITIONAL INFORMATION IN PRODUCTS

SEARCH RESULTSClose

15" Resistive Touch Medical-Grade Display

17" Resistive Touch Medical-Grade Display

18.5" PCAP Touch Medical-Grade Display

19" Resistive Touch Medical-Grade Display

1U Dual Intel® Xeon® Gold 5120T Processor Server

21.5" PCAP Touch Medical-Grade Display

23.8" PCAP Touch Medical-Grade Display

27" PCAP Touch Medical-Grade Display

2U Dual Intel® Xeon® Gold 5120T Processor Server

2U Dual Intel® Xeon® Bronze 3106 Processor Server

AI-1004LY-WQ-US4ch Analog Input Terminal for Sub-1GHz band Wireless

AI-1608AY-USB Analog Input USB I/O Unit / 8ch(16bit 100ks/s)

AI-1616L-LPE Analog Input Low Profile PCI Express Card /16ch AI(16bit 100ks/s) / 1ch Counter

AO-1604LI-PE Analog Output PCI Express Card

BX-220 ThinManager-Ready Thin Client

BX-220 Ultra-Small, Fanless Embedded Computer

BX-320 Fanless Embedded PC

BX-830D - Fanless Embedded PC, Conforms to EN 50155, Train and Vehicle Mountable

BX-956S - Fanless Embedded PC

BX-R100 - Fanless Embedded PC, Conforms to EN 50155, Train and Vehicle Mountable

BX-S959SD-DC Series Fanless Embedded PC with Atom E3845 1.91GHz Quad Core 8GB Memory

BX-T1000 Fanless Embedded PC w/ Intel Core i7 7600U

BX-U200 - Fanless Embedded PC / Ultra small design / Atom x5-E3940

CM-ME121P 12.1" PCAP Touch Medical Display

COM-1(USB)H Serial Communication USB I/O Unit

COM-1PD(USB)H Serial Communication USB I/O Unit

CONPRO-H9320 High Performance Industrial AI Computer

Contec 1U Rack Mount Industrial Performance Server

Contec 2U Rack Mount Industrial Performance Server

Contec 4U Industrial Performance Server

CPS-MG341-ADSC1-931 CONPROSYS M2M Gateway

CPSL-08P1EN Multi-Protocol, IP67 8-Channel IO-Link Master

CPSN-AI Analog Input Module for CONPROSYS Nano Series

CPSN-COM-1PD CONPROSYS nano Series Serial I/O Module RS-422A/485

CPSN-DI-08 CONPROSYS Nano Series Digital Input Module

CPSN-DI-16BCL Digital Input CONPROSYS Nano I/O Module 16ch

CPSN-DO-08 CONPROSYS Nano Series Digital Output Module

CPSN-DO-08RL Digital Output CONPROSYS Nano I/O Module 8ch

CPSN-MCB271-1-041 CONPROSYS Nano Remote I/O - Communication Coupler

CPSN-SSI-4C Thermocouple Module for CONPROSYS Nano Series 4ch

CT-RU101PA 10.1” Fully Rugged Tablet

CT-RU101PB 10.1" Rugged Tablet PC

CT-RU104PA 10.1” Fully Rugged Tablet

DIO-0404LY-WQ-US Isolated Digital I/O Terminal for Sub-1GHz band Wireless

DIO-0808LY-USB Digital I/O USB I/O unit

DIO-0808RN-USB Digital I/O USB I/O unit 8ch/8ch

DIO-1616HN-USB Digital I/O USB I/O unit 16ch/16ch (isolated 5 - 50VDC) - the N series

DIO-1616L-PEDigital I/O PCI Express Card 16ch/16ch (Isolated 12 - 24VDC)

DIO-1616LN-ETH Isolated Digital I/O Unit (16ch DI, 16ch DO) for Ethernet

DIO-1616LX-USB Digital I/O USB I/O Unit 16ch/16ch (isolated 12 - 24VDC) - The X Series