The DIO-0808TY-USB is a USB2.0-compatible terminal that expands the input or output function of a PC for digital signals. Being bus-powered, it does not need an external power supply. It has the 8ch of unisolated TTL level input and 8ch of unisolated open-collector output....

Quickly and easily connect your plant floor equipment and manufacturing systems for real-time condition monitoring and diagnostics with the new IO-Link Master from Contec. It's one of the easiest ways companies can jump into industrial IoT and Industry 4.0 and see results quickly. Features:...

This PCI Express bus-compliant interface board is for input/output uninsulated TTL-level digital signals. Therefore, it offers input and output for up to 16 channels and enables a fast response (within 200nsec). You can use all input signals as interrupt inputs, disable/enable the interrupt in...

This USB2.0-compliant digital I/O unit extends digital signal input from the PC USB port and the output signals to SPDT relay contacts. This USB digital I/O unit is compatible with input digital signals at 12 - 24VDC, and features 8 channels of Optocoupler isolated...

This USB 2.0-compatible digital I/O terminal can be connected to a USB interface of a PC to provide input and output digital signals (12 - 24 VDC) easily. It allows input for up to eight channels as well as eight output channels. This unit...

This PCI bus interface board offers 16 channels for digital signals input as well as 16 channels for digital signals output. You can use all the input signals as interrupt request signals, disable or enable the interrupt in bit units, and select the edge...

This PCI bus interface board offers 32 channels for digital signals input as well as 32 channels for digital signal output. You can use all the input signals as interrupt request signals, disable or enable the interrupt in bit units, and select the edge...

Monitor equipment anywhere in the world! The CONPROSYS M2M gateway communicates data from the sensor to an application software, allowing the transmission of collected data to the cloud with simple settings.  In fact, with the CONPROSYS M2M series, you can collect data from various...

This remote I/O model CPU unit has LAN interfaces and four expansion slots. If necessary, you can freely combine this product with CONPROSYS nano series I/O modules. In addition, this unit can be controlled from a PC running Windows or Linux and supports Modbus...

This expansion I/O module adds an opto-coupler isolated input interface with a response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series. The CPSN-DI-08L is equipped with 8 inputs and 1 common that support current sink/source output. This...

This expansion module adds a digital output interface to the CPU unit of the CONPROSYS nano series. CPSN-DO-08 has 8 opto-coupler isolated Output channels (current sink output) whose response speed is 200μsec or less. This module can be used with an external circuit power...

This expansion I/O module adds a digital output interface to the CPU unit of the CONPROSYS nano series. The module offers 8 channels of opto-coupler isolated output (current source type) with a response speed of 200μsec or less. This module offers either a built-in...

This expansion I/O module adds an opto-coupler isolated input interface with a response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series. The module is equipped with 16 inputs and 1 common that supports current sink/source output. The...

This expansion I/O module adds an analog input interface to the CPU unit of the CONPROSYS nano series. The CPSN-AI features a 12-bit or 24-bit resolution analog input. One module can be used as single-ended voltage input with 8 channels, differential voltage input with...

This Ethernet gateway converts Ethernet into wireless in the Sub-1GHz band. Data from the Wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or PC received data can be sent via Ethernet. The long-distance communication capability thanks to the wireless Sub-1GHz...

This USB2.0-compliant digital I/O unit extends the digital signal input and output of the PC’s USB port. Its compact design (188.0(W) x 78.0(D) x 30.5(H)) makes it easy to install the product within a panel or device using DIN rail mounting jigs, or on...

This USB2.0-compliant digital I/O unit provides a digital signal I/O function on a PC. This unit offers input and output digital signals at 12 - 24VDC. It features 16 optocoupler isolated input channels (compatible with current sink output) and 16 optocoupler isolated open-collector output...

This USB2.0-compliant digital I/O unit provides a digital signal I/O function on a PC. This unit offers 12 - 24VDC input and output digital signals. In fact, it features 16 optocoupler isolated input channels (compatible with current sink output) and 16 optocoupler isolated open-collector...

This PCI-compliant interface board for 12 - 24 VDC digital signal input/output. PIO-16/16L(LPCI)H offers 16 input and output channels. The module offers Windows or Linux driver (API-PAC(W32). The module features brackets for standard PCI slots. A different external power supply can be used for...

This PCI Express bus-compliant interface card extends the digital signal I/O functions of a PC. DIO-1616L-PE is a 12 - 24VDC opto-coupler isolated type with 16 opto-coupler isolated input channels and 16 opto-coupler isolated open-collector output channels. You can use all input signals as...

This Ethernet-compliant digital I/O unit provides a digital signal I/O in a PC LAN port. Digital signals can be input and output at 12 - 24VDC. This unit offers 16 optocoupler isolated input channels (compatible with both current sink and current source outputs) and...

***Please Note: Due to global supply chain shortages, the lead time for this product is longer than usual. The current lead time is approximately 12 - 24 weeks depending on inventory levels at the time your order is placed. Once you place your order you...

The CNT-3208M-PE is an interface card for PCI Express bus conformity. It can count a pulse signal from outside device input. 8ch are equipped with 32 bits up/down counter. High-speed data transmission is possible by the high-speed pulse input (a non-isolation Time To Live level, a...

This is a mounting bracket for the Contec USB I/O Terminal series.  BRK-USB-Y Datasheet BRK-USB-Y User Manual

The PCA96PS-P is a cable used to connect the signal of an external apparatus with the 96-pin half-pitch connector of a Contec interface card. Type: Shielded (straight)Connector (module): 1.27mm pitch 96-pin (female)Connector (external): none (1.27mm pitch lamination) Ordering Information PCA96PS-0.5P: 0.5m one end connector shield...

View the Datasheet Current Lead TIme: 2 - 3 weeks ARO The PIO-32/32H(PCI)H is a PCI bus-compliant interface board for the input/output of digital signals. The board can input and output digital signals at 24 - 48VDC. It can input and output up to...

The PCB96PS-P is a two-ended cable that connects a 96-pin half-pitch connector to a 96-pin half-pitch connector on an interface card made in the United States. Type: Shielded (straight) Connector (module): 1.27mm pitch 96-pin (female)Connector (external): 1.27mm pitch 96-pin (female) Ordering Information PCA96PS-0.5P: 0.5m two-ended connector shield cable...

The DIO-32DM3-PE is a PCI Express (PCIe) bus-compliant interface card that supports transfer by bus mastering and performs input/output between the external device and digital signal. This product features unisolated LVTTL level (Operating voltage : 3.3V) I/O 32channels and you can select input /...

The PCB37PS-P is a shield cable for a 37pin D-SUB connector -> 37pin D-SUB connector. Type Shielded (straight) Connector (module) D-SUB 37-pin (male) Connector (external) D-SUB 37-pin (male) Model Description / Certification PCB37PS-0.5P 37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost PCB37PS-1.5P 37pin D-type(M) at Each...

PCA68PS-P is a cable for connecting the signal of the 68pin 0.8mm pitch connector and external apparatus CONTEC PC card. Type Shielded (straight) Connector (module) 0.8mm-pitch 68-pin (male) Connector (external) none (1.27mm-pitch lamination)   Ordering Information PN PCA68PS-0.5P: 68pin 0.8mm Pitch Connector to Open-Ended, Shield...

The PCE37/9PS connects with CN1 (37 pin D-SUB connector) of a serial I/O card. It is a 9-pin D-SUB connector [M (male) type] of 4 channels.  Type: Shielded (straight)Connector (module): D-SUB 37-pin (male)Connector (external): 4x D-SUB 9-pin (male) Ordering Information PCE37/9PS Divider shield cable, D-SUB 37-pin ->...

The PCE50/37PS-0.5P converts 50 pin miniature ribbon connectors of an interface card into 37 pin D-SUB type connectors [F(A female)]. Type: Shielded (straight)Connector (module): Miniature ribbon 50-pin (male)Connector (external): D-SUB 37-pin (female) Ordering Information PCE50/37PS-0.5P 50 pin miniature ribbon --> 37 pin D-SUB conversion shield...

The PCA50PS-P is a cable that connects the signal of an external device to a 50pin miniature ribbon connector of a Contec interface card. Type: Shielded (straight)Connector (module): Miniature ribbon 50-pinConnector (external): none (1.27mm pitch lamination) Ordering Information PCA50PS-0.5P: 0.5m 50pin miniature ribbon connector to Open-Ended,...

The PIO 16/16TB(PCI)H is a PCI bus interface board that outputs and inputs a TTL-level digital signal. The board is capable of up to 16 inputs and 16 outputs. The driver (API-PAC(W32)) for Windows and Linux appending.  Key Features Improved noise-protection Opto-isolated input and...

This Digital Acquisition (DAQ) unit is Ethernet-compliant and is used to provide digital signal I/O functions from a PC LAN port. It provides a flexible voltage range, with 12V to 24VDC on the inputs, and output capability of up to 120VAC/DC. It has 16...

This expansion I/O module adds a thermocouple interface to the CPU unit of the CONPROSYS nano series. Each module offers four channels of differential inputs.  Compatible with various types of thermocouple inputs  This module is compatible with a wide range of thermocouple input types...

This digital I/O terminal sends I/O digital signals wirelessly in the Sub-1GHz band. Thanks to the capability of long-distance communications in the Sub-1GHz band, and mesh support, the module is suitable for controlling and monitoring devices that are spread in the wide area.  The...

The PCB96WS-P is a 96 pin half -> 37 pin D-SUB(male) conversion shield cable (1.5m). Type: Shielded (straight) Connector (module): 1.27mm pitch 96-pin (female)Connector (external): 2x D-SUB 37-pin (male) Ordering Information PCA96WS-1.5P: 1.5m  PCA96WS-3P: 3m PCA96WS-5P: 5m 

The CNT-3204IN-ETH is an Ethernet-compliant up/down counter module designed to count pulse signals from external devices through a LAN port to a computer. It features four channels of 32-bit up/down counters, which allow connections to external devices such as rotary encoders or linear scales....

This PCI Express bus-compliant interface board provides an analog signal output on a PC. It features 4 bus isolated 16-bit analog output channels. Equipped with digital I/O and counter, this card offers multifunction and is bus isolated which provides isolation between the PC and...

This analog input terminal sends input analog signals wirelessly in the Sub-1GHz band. Thanks to its long-distance communications in the Sub-1GHz band capability, and mesh support, this module is suitable for controlling and monitoring devices that are spread in a wide area.  Four 10-bit...

The USB2.0 analog input terminal allows analog measurements thanks to the USB interface. This unit allows you to choose from analog input (16bit, 8ch), digital input (LVTTL 4points), or digital output (LVTTL 4 points). Thanks to the [C-LOGGER] attached data logger software, no-programing data...

This PCI Express bus multi-function interface card offers digital input and output (LVTTL level, for each 4 points), 16bit high-precision analog input and counter (32bit, 1ch). It features a Low-Profile size slot and a standard size slot by changing an attached bracket. A Windows/Linux...

This product is a PCI bus supported board that extends the analog signal output functions of a PC. Equipped with four channels of 16-bit analog output, the product is an individual isolation model using a D/A converter for each channel to provide isolation for...

The AI-1608xIN is an Ethernet-compatible unit with analog inputs. Its compact design (188.0(W)×78.0(D)×30.5(H)mm) ensures easy installation, whether on the floor, wall-mounted, or integrated into equipment using the DIN rail. With support for Windows/Linux device drivers, compatibility is seamless. It features 8 channels of 16-bit...

The AO-1604xIN is an Ethernet-compatible unit with analog outputs. Its compact design (188.0(W)×78.0(D)×30.5(H)mm) ensures easy installation, whether on the floor, wall-mounted, or integrated into equipment using the DIN rail. With support for Windows/Linux device drivers, compatibility is seamless. It features 4 channels of 16-bit...